Lie-Nielsen No.48 - Tongue & Groove Plane [Preowned, SOLD]
Pre-owned, probably unused. With a Lie-Nielsen branded plane sack.
The Lie-Nielsen Tongue & Groove plane cuts a groove with one side of the cutter exposed. Swing the fence to expose both sides to cut the tongue. The slot in the one piece blade registers on the milled body casting, to ensure squareness and equal depth of cut on both sides. Since this is a heavy stock removal tool no depth adjuster...
Lie-Nielsen SD-1 - Nicker Screwdriver [Preowned, SOLD]
The SD-1 Nicker Screwdriver is made to fit the slotted screw securing the old style knife nickers on the LN. 10-1/4 Bench Rabbet Plane (from 2018 or earlier).
They may be useful for other jobs as well. Modelled after gunsmith's screwdrivers with machined tips, correctly sized to fit the screw slots, giving you good power and control, without slipping.
5" Approximate Overall Length
.156"...
Japanese Skew Chisel - Suminagashi [Preowned, SOLD]
36mm wide red oak handled unused Suminagashi chisel which for some reason has been expertly skewed along its 36mm blade edge.
So this is now a laminated steel 36mm wide skew chisel. Triple fluted hollows.
Little or very little use.
The skew is right to left (high to low) when looking down the handle.
The handle has also had a flat introduced into the handle so that the blade lies totally flat when...
Auriou Riffler - 195mm Grain 12 [Clearance, SOLD]
A riffler is a rasp with 2 shaped ends.
Tapered curved triangle with cut edges plus tapered curved lozenge.
The photos will best describe these.
They haven't been used but show cosmetic staining here and there. All good to refine the shape of your latest wonderful wooden creation.
Hand stitched teeth. Octagonal handle for comfort.
195mm from tip to tip.
The stitched riffler ends...
Auriou Riffler - 195mm Grain 10 [Clearance, SOLD]
A riffler is a double end rasps with different shapes on each end.
Curved flat with cut edges one end with a tapered curved triangle with cut edges.
The photos will best describe these.
They haven't been used but show cosmetic staining here and there.
All good to refine the shape of your latest wonderful wooden creation.
Hand stitched teeth. Octagonal handle for comfort.
195mm...
Lie-Nielsen - Bevel Edged Chisels (O1 Steel) - Set of 5 in Tool Roll [Preowned, As New, SOLD]
The original O1 chisel set
5 chisels in O1 steel.
1/8", 1/4", 3/8", 1/2" & 3/4" wide.
Lie-Nielsen Leather tool roll.
Most bench chisel makers now use A2 steel (or in the case of Veritas, PMV11), in the making of their chisels.
Basically this steel offers an improvement in edge retention although it is more difficult to sharpen. O1 steel, on the other hand,...
Lie-Nielsen - Dovetail Saw in Saw Case [Preowned, SOLD]
Little used in great condition.
15ppi. RIP cut
Lie-Nielsen Saw case.
This is a classic LN dovetail saw with a blade length of 10" (250mm)
Lie Nielsen No.51 - Shooting Board Plane [Preowned, SOLD]
Pre-owned, little used.
"The Lie-Nielsen Shooting Board Plane is a single purpose plane designed to trim mitres and other end grain cuts on a shooting board. Stanley first made its version in 1909 along with a metal shooting board. Lie-Nielsen had many requests for this tool over the years, so we are pleased they redesigned the Stanley version.
The Lie-Nielsen version utilises a standard 60mm (2.3/8")...
Lie-Nielsen SD-4 - Chipbreaker Screwdriver [Preowned, SOLD]
Chipbreaker screwdriver.
Pre-owned, in great condition with a few dings to the handle.
Curly Maple Handle (newer versions have cherry handles)
Modelled after gunsmith’s screwdrivers with machined tips, these screwdrivers are made to fit specific screw slots on Lie-Nielsen tools to give you control without slipping.
Hardened 416 Stainless Steel blades, numbered brass ferrule.
The...
Lie-Nielsen SD-8 - Plane Handle Toe Screwdriver [Preowned, SOLD]
Pre-owned, in good condition with a few dings to the handle.
Curly Maple Handle (newer versions have cherry handles).
Modelled after gunsmith’s screwdrivers with machined tips, these screwdrivers are made to fit specific screw slots on Lie-Nielsen tools to give you control without slipping.
Hardened 416 Stainless Steel blade.
This screwdriver is made to fit the toe screw on Lie-Nielsen...
Lie-Nielsen No.40 1/2 - Scrub Plane [Preowned, Unused, SOLD]
Pre-owned, unused with a Lie-Nielsen branded plane sack.
This plane is based on the Stanley 40 1/2 and is designed to remove large quantities of wood quickly e.g taking rough-sawn boards down to size, before finishing with a Jack Plane and a Smoothing Plane.
It is also useful for shaping irregular objects or creating an interesting finished surface.
The Lie Nielsen Scrub Plane has a cast Iron...
5 French Walnut Handles (with Tapered Brass Ferrules) [Clearance, SOLD]
Attractive French Walnut handles for chisels, rasps etc
5" overall (125mm) with 3/4" diameter ferrule, rounded profile with waist.
The handles are pre-drilled with a 4mm diameter hole about 12mm deep.
Clear lacquer finish.
New old stock.
3 Gimlets with Boxwood Handles [Preowned, SOLD]
These lovely vintage gimlets 170mm, 130mm & 90mm.
These will always find use in your workshop.
Lie-Nielsen No.8 - Jointer Plane [Preowned, Unused, SOLD]
Pre-owned Lie-Nielsen Toolworks No.8 jointer plane, unused with a Lie-Nielsen branded plane sack.
This is the big boy!
The Lie-Nielsen No.8 Jointer, a real whopper of a plane. It is the largest production plane at 24" (610mm). It will flatten and true like no other.
24" (610mm) long.
2-5/8" (66mm) wide blade. A2 steel.
Iron body, 10lbs (4.5kg).
Selling brand new...
Lie-Nielsen - Spare Blade for a LN 97 Large Chisel Plane [Preowned, Unused, SOLD]
As new, pre-owned.
Replacement blade for the Lie-Nielsen No. 97 Large Chisel Plane.
Lie-Nielsen - Spare Blade for a LN 7 1/2 Low Angle Jointer Plane [Preowned, Unused, SOLD]
As new, pre-owned.
Replacement blade for the Lie-Nielsen No. 7½ Low Angle Jointer Plane. Comes with a 25° flat ground bevel.
2.300" wide x .240" thick
A2 cryogenically treated Tool Steel
Veritas Bevel Up Jointer plane (with PV11 Blade) [Preowned, SOLD]
Pre-owned - this is a commission sale.
Originally intended for use in making a bench, our customer decided to buy a bench instead so this plane hasn't seen very much work at all. It comes in its original packaging with the instruction booklet. It is in excellent condition. The sole has only cosmetic wear marks.
This is what we say about this plane on our website where it retails for £369
"The Veritas...
Lie-Nielsen - 4 Bevel Edge Chisels [Preowned, Unused, SOLD]
1/8'', 1/4'', 1/2'' & 1''bevel edge chisels in original packaging and boxes.
We have inspected these and it is just like opening a fresh box from Lie-Nielsen as all the packaging is only a little disturbed.
The chisels still have their wax protection for the edges, confirming that these chisels are AS NEW and unused.
The 1/8'' is a bit of a rarity...
Bridge City Toolworks - Tri & Mitre Squares [Preowned, Unused, SOLD]
These are The Bridge City Tool Works ungraduated Made in China 2019 models.
5V2 Precision Try Square - This precision square is made of extremely stable and anodized aluminium, making it very robust. The handle consists of two symmetrical parts. Four screws secure the blade, which is slightly rounded at the corners. Made to a tolerance of 0.01 mm per 100 mm. There is a triangular cut-out in the...
Quansheng - No.5 Bedrock Pattern Bench Plane [Preowned, Unused, SOLD]
Unused, in original box and packaging, as new.
Cherry handles, 2'' wide blade. 14'' overall length (355mm)
This is a commission sale on behalf of a customer.
Veritas - Mark II Deluxe Honing Guide Set [Preowned, SOLD]
Pre-owned but seemingly unused.
This is a commission sale on behalf of a customer.
This is what Classic Hand Tools say about this set on our website ..
''The key to consistent and fast honing is repeatability - and this guide delivers it in spades. Whether you're a sharpening veteran or just starting out, this versatile guide lets you concentrate on sharpening without worrying...
Lie-Nielsen - Pair of 1/4'' Skew Chisels [Preowned, Unused, SOLD]
A pair of 1/4'' skew chisels from Lie Nielsen Toolworks.
Pre-owned. but unused.
No box.
Lie-Nielsen - Pair of 3/8'' Skew Chisels [Preowned, Unused, SOLD]
A pair of 3/8'' skew chisels from Lie Nielsen Toolworks.
Pre-owned. but unused.
No box.
Lie-Nielsen - Pair of 1/2'' Skew Chisels [Preowned, Unused, SOLD]
A pair of 1/2'' skew chisels from Lie Nielsen Toolworks.
Pre-owned but unused.
No box.
Lie-Nielsen - 2'' Plane Frog (50 degree) [Preowned, SOLD]
Pre-owned, probably unused. With a Lie-Nielsen branded plane sack.
If you prefer a higher angle for your plane blade you can either fit a 50 degree (York Pitch) or a 55 degree (Mid Pitch) frog.
Most planes have their blades at an angle of 45°, known as common pitch. But the famous English Smoothers like Norris are usually 50° (York Pitch) or 55° (Middle Pitch). The higher pitches...
Lie-Nielsen - 2 3/8'' Plane Frog (50 degree, York Pitch) [Preowned, SOLD]
Pre-owned, probably unused. With a Lie-Nielsen branded plane sack.
If you prefer a higher angle for your plane blade you can either fit a 50 degree (York Pitch) or a 55 degree (Mid Pitch) frog.
Most planes have their blades at an angle of 45°, known as common pitch. But the famous English Smoothers like Norris are usually 50° (York Pitch) or 55° (Middle Pitch). The higher pitches...
Lie-Nielsen - 2 3/8'' Plane Frog (55 degree, Middle Pitch) [Preowned, SOLD]
Pre-owned, probably unused. With a Lie-Nielsen branded plane sack.
If you prefer a higher angle for your plane blade you can either fit a 50 degree (York Pitch) or a 55 degree (Mid Pitch) frog.
Most planes have their blades at an angle of 45°, known as common pitch. But the famous English Smoothers like Norris are usually 50° (York Pitch) or 55° (Middle Pitch). The higher pitches...
Karl Holtey 982 Smoothing Plane [Preowned, SOLD]
The best description of this plane is from Karl Holtey's website. Karl has long been recognised as a planemaker who has always sought perfection in his work. He is regarded by many as one of the best, if not the best modern day planemaker.
The 982 was made in the early years of the last decade. This example has seen very little use and has minor superficial scratch marks on the sole consistent...
Record Calvert Stephens - CS88 Bench Plane [Preowned, SOLD]
This is a commission sale on behalf of a customer.
This limited edition plane was made by Record Tools.
The excellent reference site dedicated to Record Tools is the best place to discover more information on all matters Record including detailed information about this plane (although the prices they quote are 17 years out of date!).
Information on the Record No. CS88 Calvert Stevens Smooth...
Lie Nielsen No.102 - Low Angle Block Plane (Bronze) [Preowned, Unused, SOLD]
Pre-owned in great condition with plane sock.
The Lie-Nielsen small bronze Low Angle Block Plane fits perfectly in the hand and slips easily into the pocket.
The 5¼" body holds a 1¼" x 1/8" thick blade. An unobtrusive stainless steel adjuster offers blade control of micrometer ease and precision with minimum backlash. The mouth is not adjustable.
The blade in the...
Lie-Nielsen No.40B - Butt Mortise Plane [Preowned, Unused, SOLD]
Pre-owned - never used, in Lie-Nielsen plane sock.
The Butt Mortice is a simple to use plane that produces precise mortices of uniform depths with sharp, square corners.
The body is cast iron with a bronze blade cap, and the handles are polished cherry.
The sole has a long slot that gives a clear view of your work and allows for quick removal of shavings.
The plane measures 9 3/4''...
Lie-Nielsen No.507 - Rebating Block Plane (NO KNICKERS!) [Preowned, SOLD]
NO KNICKERS AGAIN! (we sold another of these a couple of weeks ago). This again is pre-owned in little used condition with Lie-Nielsen branded plane sack
The Lie-Nielsen No 507 Rebating Block Plane is also described as a Lie-Nielsen 60½ Rebating Block Plane (60 1/2R).
This 12° angle rebate block plane is based on an old Sargent block plane (No 507). The plane body is made from unbreakable...
Auriou - 10mm Ironing Rasp (Hand-stitched with Half-round Bottom) [Preowned, SOLD]
A little bit of French magic!
The cranked handle allows knuckle clearance.
We have supplied the appropriate handle, which can be removed.
This rasp is stitched in the underside only and is convex shaped across its 10mm width (only).
55mm of the length is ''stitched''
This is grain 12 which is deemed fine so this little beauty is for detailed work on relatively small...
Rabone & E Preston & Sons - Boxwood & Brass Rules [Preowned, SOLD]
3 nice boxwood & brass rules.
These are all in good condition. A light clean will dislodge any lingering cosmetic marks.
4'' caliper rule No.1466 - Rabone.
24'' four fold rule - No.1380 - Rabone
48'' four fold rule - No.3276 - E. Prestons & Sons Birmingham
Flexcut KN13 - Detail Carving Knife [Clearance, SOLD]
Ergonomically shaped handle for optimum comfort with a straight 38mm blade with fine a point for detail work.
New, old stock in original packaging.
Described as a detail knife.
Flexcut FRP310 - Beginners 5 piece Carving Set - Palm Handles [Preowned, SOLD]
5 carving tools comprising..
Series 3 (shallow gouge) 9mm
Series 6 (medium gouge) 8mm
Series 11 (veining gouge) 3mm
V parting tool - 6mm
Skew chisel 8mm
Used just a handful of times (if that!) so in almost new condition in the original box.
The handles are short, shaped cherry handles designed to fit into your palm.
Made by Flexcut USA (FRP310)
If you need some lime to practise...
Woodpeckers - 600mm Rule with Rule Stop 2 [Preowned, Unused, SOLD]
Unused, as new.
The rule reads left to right up to 600mm on one bevelled edge.
0-300mm from the centre on the other edge.
This is supplied with a Rule Stop 2 to help you repeat accurate marking out.
(Note - The ends of the rule have threaded holes that allow you to mount an optional Hook Stop)
15 Quality Ash Chisel Handles (with Brass Ferrules) [Clearance, SOLD]
The octagonal ash handles are all 130mm including a tapered brass ferrule
Suitable for bench chisels or carving tools.
Clear lacquer finish to show off the grain.
Five 17mm wide handles with 13mm wide ferrules.
Seven 19mm wide handles with 13mm ferrules.
One 22mm wide handles with 15mm ferrule.
One 26mm wide handle with 17mm ferrule.
One 28mm wide handle with 20mm ferrule.
Woodpeckers One Time Tool - Large Steel & Aluminium Panel Gauge [Preowned, SOLD]
600mm with 1mm graduations on a round bar.
165mm fence.
Screw out turnscrew at one end with a circular marking cutter at the business end.
This screams quality.
A heavy duty item.
Lie-Nielsen No.073 - Large Shoulder Plane [Preowned, SOLD]
Commission sale
Pre-owned in excellent condition
This description is from our main site where this plane (without plane sack is normally available for £376 - but we are currently out of stock!)
''A versatile, general purpose shoulder plane with nice heft and the best size to start with. This all-metal shoulder plane is based on the Record 073, which in turn was based on a Preston...
Lie-Nielsen No.49 - Small Tongue & Groove Plane [Preowned, SOLD]
Pre-owned - a commission sale on behalf of our customer.
This is the description of the plane from our web site (currently out of stock, priced at £329)
"The Lie-Nielsen Tongue & Groove Plane (1/2'') cuts a groove with one side of the cutter exposed. Swing the fence to expose both sides to cut the tongue. The slot in the one-piece blade registers on the milled body casting,...
Lie-Nielsen - Low Angle Rebating Block Plane (Knickered) [Preowned, SOLD]
Pre-owned - a commission sale on behalf of our customer.
Original Lie-Nielsen box dates the production to March 2018.
This is what we say on our site about this plane which retails new for £218.....
The Lie-Nielsen No 507 Rebating Block Plane is also described as a Lie-Nielsen 60½ Rebating Block Plane (60 1/2R).
''This 12° angle rebate block plane is based on an old...
Lie-Nielsen No.7 - Jointer Plane [Preowned, SOLD]
Pre-owned - a commission sale on behalf of our customer.
In fabulous condition - a few scuffs and scratches here and there but nothing to be concerned about at all.
In original box (dated August 2018)
''The Lie-Nielsen No.7 Jointer Plane is a great plane for edge jointing and flattening larger areas.
The late, great Alan Peters used his No.7 for pretty much everything, and today...
Lie-Nielsen No.4 - Bronze Smoothing Plane [Preowned, SOLD]
Pre-owned - a commission sale on behalf of our customer.
Currently out of stock on our main site.
This plane is in its original box (dated 2019) and is supplied with a branded Lie-Nielsen plane sock. Our inspection shows cosmetic scratches, scuffs etc consistent with relatively light use over time. The brass will clean up beautifully with a light polish. So we are happy to describe this as in...
Lie Nielsen No.4 1/2 - Smoothing Plane [Preowned, SOLD]
Pre-owned - a commission sale on behalf of our customer.
In G++ condition, cosmetic scuffs and scratches. Little used.
Original box (2016). This plane sells new for £465 on our main site.
"Solidly built, this is the ultimate smoothing plane. It is longer, wider, and heavier than the No. 4, and its extra thick blade eliminates the possibility of chatter.
Comes with a 45° frog...
Lie-Nielsen No.5 - Jack Plane [Preowned, SOLD]
Pre-owned - a commission sale on behalf of our customer.
In G++ condition, cosmetic scuffs and scratches consistent with careful use. This plane has seen little use.
Original box (2018)
The equivalent of a later type Stanley Bedrock No.605 jack plane.
14'' long (355mm)
2'' wide blade (50mm)
Iron body 5 1/2lbs (2.5kg)
Veritas - Medium Shoulder Plane [Preowned, SOLD]
Pre-owned - a commission sale on behalf of our customer.
A few superficial scuff marks/scratches but this plane has been used quite infrequently and is in G++ condition with a full O1 iron.
Original box.
Selling on our main site for £219
''The shoulder plane (a specialized rebate plane) is the ultimate tool for trimming a joint to a perfect fit. There is no better plane for...
Veritas Custom-made No.4 - Smoothing Plane (with 55 degree and 45 degree frogs) [Preowned, SOLD]
This plane has a fitted 55 degree frog with a 2'' wide PMV11 blade, large rear tote (back handle) and wide front knob. It also has a 45 degree frog should you wish to change your blade angle.
Original box and instruction leaflet.
Norris style central stainless steel adjusting screw.
Lateral setscrews centre the plane blade in the plane mouth
The width of mouth opening can be adjusted...