Sort By
Per Page
View
Grid
List
5 1/2'' Post for Veritas Bench Hold Down
This 5 1/2" Post is for the Veritas Bench Hold Down, for holes where through travel is limited.
At just 5-1/2" long, it provides about 4" of clamping capacity.
Patented.
Benchcrafted Mag-Blok Cherry
We've had our eye on these Mag-Bloks by Benchcrafted for years and years, but sadly they'd previously had an agent in the UK. Thankfully, things have changed and we can import the Mag-Bloks alongside their wonderful bench hardware.
The Mag-Bloks are equally fantastic in both the home and the workshop. We use them here in the shop to display bench chisels, and a couple of us have them in...
Benchcrafted Mag-Blok Maple
We've had our eye on these Mag-Bloks by Benchcrafted for years and years, but sadly they'd previously had an agent in the UK. Thankfully, things have changed and we can import the Mag-Bloks alongside their wonderful bench hardware.
The Mag-Bloks are equally fantastic in both the home and the workshop. We use them here in the shop to display bench chisels, and a couple of us have them in...
Benchcrafted Mag-Blok Oak
We've had our eye on these Mag-Bloks by Benchcrafted for years and years, but sadly they'd previously had an agent in the UK. Thankfully, things have changed and we can import the Mag-Bloks alongside their wonderful bench hardware.
The Mag-Bloks are equally fantastic in both the home and the workshop. We use them here in the shop to display bench chisels, and a couple of us have them in...
Benchcrafted Mag-Blok Walnut
We've had our eye on these Mag-Bloks by Benchcrafted for years and years, but sadly they'd previously had an agent in the UK. Thankfully, things have changed and we can import the Mag-Bloks alongside their wonderful bench hardware.
The Mag-Bloks are equally fantastic in both the home and the workshop. We use them here in the shop to display bench chisels, and a couple of us have them in...
Bessey TW16-2K 3/4'' Bench Hold Down
The Bessey Hold Down Clamp with the 19mm adaptor to work on workbenches with 3/4" holes.
Clamping depth 100mm.
Max. clamping height 200mm.
High quality 2-component plastic handle with smooth-running trapezoidal threaded spindle.
Includes the 19mm (3/4") adaptor.
If you are looking for this to work with a workbench which has 1" holes (such as the Sjoberg Elite range)...
Crucible Iron Holdfast
The Crucible holdfast. Made from ductile iron in an Illinois family foundry that’s been in business for more than a century. Based on a French design salvaged from a barn. The last holdfast you are likely to need.
Since Roman times, the iron holdfast has been an essential piece of workbench equipment for carpenters, joiners and cabinetmakers. Yet many of us struggle with holdfasts that work...
Crucible Planing Stop
We have always loved blacksmith-made planing stops, which are embedded in the end of a block of wood that is about 3” x 3” x 12”. The block is friction-fit into a mortice in the benchtop and moves up and down with mallet taps.
In our experience, the planing stop is as important as the workbench’s face vice and has almost-endless uses.
The main problem with a blacksmith...
Lee Valley 3/4'' Dog Hole Bushings
These 3/4'' hardened steel bushings help you make an accurate dog-hole drilling guide using any 1 1/2'' thick board.
Knurling on the bushing provides a mechanical lock when installed in an appropriately sized hole (1'' for the 3/4'' bushing), and a projecting rim ensures that it rests perpendicular to the jig's surface.
Made in Canada.
Veritas Tail Vice Screw
The tail vice screw is essentially the same construction as a shoulder vice screw but without an end guide, this tail vice screw has a clamping capacity of 17" less thickness of wooden jaws (not included) and is 21" overall.
1.1/8" diameter screw with single-lead Acme threads.
Mounting screws included.
Wooden Handle not included, but can be purchased as an optional extra.
Made...
Benchcrafted Benchmakers Hardware
Typical captive nut arrangements for knockdown bases involve either a square nut, recessed hex nut, or short, slotted cross-dowels. All of these fasteners make it tricky to assemble the joint without some frustration or extra tools.
The BenchCrafted barrel nuts and end cap barrel nuts are the ideal choise for making knock-down joints in workbench bases.
The set of 4 zinc-plated steel Barrel Nuts are...
Benchcrafted Classic Leg Vice Base Hardware
In the 19th and early 20th century, many vocational schools and commercial shops in France and its colonies were outfitted with Roubo-style benches and metal leg vice hardware. French hardware is typically made entirely of metal, whereas hardware from Britain and America usually features a T-shaped iron casting fitted with a sliding wooden handle. Benchcrafted designed theirs around the French model...
Benchcrafted Classic Tail Vice (Wagon Vice) Kit
Clamping work to a bench surface between dogs is a very old technique. The historical record gives us examples as far back as the Roman era, but most woodworkers know the tail vice from the modern Scandanavian and German tradition. The oldest detailed drawings we have are from the early 16th century by German author Martin Löffelholz.
The Benchcrafted Tail Vice uses a pair of either wooden or metal...
Benchcrafted Crisscross 14
The Benchcrafted Crisscross completely transforms any leg vice into an effortless experience. Fully supporting the weight of the chop, the vice hardware, and its own weight, the Crisscross floats in and out on steel pins and bearing plates, giving a virtually weightless, friction-free action to the vice. The mechanism automatically adjusts through the range of your vice's capacity to any workpiece...
Benchcrafted Crisscross Retro
The Benchcrafted Crisscross completely transforms any leg vice into an effortless experience. Fully supporting the weight of the chop, the vice hardware, and its own weight, the Crisscross floats in and out on steel pins and bearing plates, giving a virtually weightless, friction-free action to the vice. The mechanism automatically adjusts through the range of your vice's capacity to any workpiece...
Benchcrafted Crisscross Solo
The Benchcrafted Crisscross completely transforms any leg vice into an effortless experience. Fully supporting the weight of the chop, the vice hardware, and its own weight, the Crisscross floats in and out on steel pins and bearing plates, giving a virtually weightless, friction-free action to the vice. The mechanism automatically adjusts through the range of your vice's capacity to any workpiece...
Benchcrafted Crubber
Crubber is a composite material made by grinding natural cork and rubber, then combining the materials under great pressure to form a tough, resilient, grippy matrix that is then sliced into sheets. Crubber has become BenchCrafted's favourite non-slip, super-grip material for lining vice jaws. All Benchcrafted vices are outfitted with Crubber.
What's the advantage over suede or other cow skin-type...
Benchcrafted Glide Leg Vice Base Hardware - Cast
The Glide makes holding your work quick, easy, and pleasurable. It uses a clever combination of components to deliver incredible clamping force with minimal effort.
Traditional leg vices use a sliding "tommy bar" to operate the vice. This style of handle offers one distinct advantage: lots of leverage. These guys have engineered the Glide to deliver rock-solid workholding without the need...
Benchcrafted Glide Leg Vice Base Hardware - Machined
The Glide makes holding your work quick, easy, and pleasurable. It uses a clever combination of components to deliver incredible clamping force with minimal effort.
Traditional leg vices use a sliding "tommy bar" to operate the vice. This style of handle offers one distinct advantage: lots of leverage. These guys have engineered the Glide to deliver rock-solid workholding without the need...
Benchcrafted HiVise
Taking cues from early French prototypes (commonly referred to as an "etau(x)" which is simply the French word for vice) Benchcrafted have gone a few steps further and made improvements and refinements over the historical versions. The body of the vice is designed to be much stronger, yet more compact with its inset arms and single clamping screw for attaching the vise to a workbench or table. The...
Benchcrafted HiVise + Mounting Screw
Taking cues from early French prototypes (commonly referred to as an "etau(x)" which is simply the French word for vice) Benchcrafted have gone a few steps further and made improvements and refinements over the historical versions. The body of the vice is designed to be much stronger, yet more compact with its inset arms and single clamping screw for attaching the vise to a workbench or table. The...
Benchcrafted HiVise Mounting Screw
The mounting screw is designed for the HiVise to make it ultimately more portable. The HiVise can be made with either a tail vice cleat or a benchtop batten, but having a mounting screw will allow you to use it in multiple positions around your bench, or anywhere outside the workshop where you are allowed to make a mess!
Anticipating the varied needs of woodworkers Benchcrafted designed the HiVise...
Benchcrafted Moxon Vice
The Benchcrafted Moxon Vice clamps to any bench, raising your workpiece to a convenient height and holding it rock-solid. If you cut dovetails and other joints by hand, this is a vise that will completely change your experience in the shop. Fast and effortless, the Moxon vice makes joinery a pleasure.
The Moxon vice is fitted with cast iron hand wheels for rapid, easy adjustment. Instead of the handwheel...
Benchcrafted Planing Stop
The Benchcrafted planing stop is made from mild steel. The teeth are milled into the stop then lightly deburr with abrasive paper to maintain the points of the teeth. The stop arrives sharp and ready to use.
Easy Installation
Using the same principle as their Barrel Nuts, the Benchcrafted Planing Stop mounts to the wooden stock via two machine screws and a single, double-tapped barrel nut. This provides...
Benchcrafted Split Top Roubo Plans
This Benchcrafted Split Top Roubo bench plan is based on Andre Roubo's bench from Plate 11 of L'Art du Menuisier, with the added capabilities of the Benchcrafted vices. Benchcrafted developed this plan so woodworkers could build a bench using the Benchcrafted Tail Vice and Glide Leg Vice without having to figure out all the details. Simply follow the measured drawings and instruction notes.
The measured...
Benchcrafted Swing Seat - Hardware Only (no wood)
The Benchcrafted Swing Away Seat is the solution for seated work at the bench. Chopping waste between dovetails, making decorative inlay and other close work is best done from a steady, seated position. The work is brought closer to your eyes and chest, which helps you to work more precisely and comfortably. It's also a great spot to take a break, check email, or have lunch.
Stand-alone stools can...
Benchcrafted Tail Vice (Wagon Vice) Kit - Cast
Clamping work to a bench surface between dogs is a very old technique. The historical record gives us examples as far back as the Roman era, but most woodworkers know the tail vice from the modern Scandanavian and German tradition. The oldest detailed drawings we have are from the early 16th century by German author Martin Löffelholz.
The Benchcrafted Tail Vice uses a pair of either wooden or metal...
Benchcrafted Tail Vice (Wagon Vice) Kit - Machined
Clamping work to a bench surface between dogs is a very old technique. The historical record gives us examples as far back as the Roman era, but most woodworkers know the tail vice from the modern Scandanavian and German tradition. The oldest detailed drawings we have are from the early 16th century by German author Martin Löffelholz.
The Benchcrafted tail vice uses a pair of either wooden or metal...
Gloforce 225mm Gooseneck Extension
This Glofroce 225mm Gooseneck extension is slightly shorter than the 270mm version but slightly thicker and even more secure.
It can be used with the Eye-Light Pro, Suction Cup or MagFoot and comes with a female 1/4" UNC thread on one side and a male 1/4" UNC thread on the other.
Gloforce 270mm Gooseneck Extension
This Glofroce 270mm Gooseneck extension is ideal for getting the Eye-Light into even further reaches and awkward positions.
It can be used with the Eye-Light Pro, Suction Cup or MagFoot and comes with a female 1/4" UNC thread on one side and a male 1/4" UNC thread on the other.
Gloforce Clamp
The Gloforce Clamp with 55mm Jaw and 1/4" UNC thread attaches to Eye-Light and has a strong clamp to fit the Eye-Light. This clamp will attach the floodlight to any object up to 55mm wide and can angle the light in any direction using the ball joint. The clamp is perfect for attaching to the rafters if working in a loft.
* Robust Steel Constrution
* Soft Jaw Pads
* 55mm Jaw Reach
* Ball Joint
Gloforce Eye-Light Plus
The Gloforce Eye-Light Plus is a 10w small but extremely bright battery floodlight with 270mm magnetic gooseneck stand. Extremely versatile, ultra bright 10w LED rechargeable floodlight.
The light head only weighs 220g, has a diameter of 70mm, comes with a helpful LED battery indicator and it even acts as a power bank and can charge your phone.
The strong rubber magnetic gooseneck will position...
Gloforce Eye-Light Pro
The Gloforce Eye-Light Pro is a 10w small but extremely bright battery floodlight with a 450mm magnetic gooseneck stand. Extremely versatile, ultra bright 10w LED rechargeable floodlight.
The light head only weighs 220g, has a diameter of 70mm, comes with a helpful LED battery indicator and it even acts as a power bank and can charge your phone.
The strong rubber magnetic gooseneck will position...
Gloforce Magnetic Foot Base and Ball Joint
The Gloforce magnetic foot base and ball joint is a strong rubber coated magnet with ball joint attachment.
The rubber magnetic foot with ball joint fits the Eye-Light. The non-scratch 66mm rubber magnet can be conveniently attached to metal surfaces.
* Strong Rubber Magnet
* Non Scratch
* Ball Joint
* 66mm Magnet
Gloforce Sucker Cup Stand
The Gloforce suction cup with 1/4" UNC thread to attach to Eye-Light. This suction cup will attach the floodlight to a window or non-porous surface and can angle the light in any direction using the ball joint and moveable arm.
* Extra Strong Suction
* Rotational Arm
* Hold and Release Lever
Lee Valley Vice Rack Stop
This simple device from Lee Valley is designed to help prevent racking when clamping work at one side of a vice. Simply stack up as many of the 0.10" thick shims as you need to match the approximate thickness of your work, up to a total of 4", and insert it into the vice opposite the work being clamped.
For thicker work, you can add a piece of scrap wood to occupy the bulk of the space, and then...
Muzzles for Veritas Bench Dogs & Pups
For clamping a finished piece without marking it, the slip-resistant muzzles slide over the Bench Dogs (or Bench Pups) to give you a non-marring surface. They have a hard, spring-grip, plastic body with six face ribs.
Available in two sizes: 1¼" long for Bench Dogs or 3/4" long for Bench Pups. Sold in pairs.
Simon James 19mm (3/4'') Holdfast
Handmade, using traditional methods and a small forge by experienced craftsmen as a cottage industry. They are not mass produced so every one has very slight differences, which is what you expect with handmade workmanship. They are all hand stamped with the Simon James logo.
Made from 8mm steel and are designed to fit 19mm (3/4'') holes.
Overall shaft length is 12'' (30cm)
Overall...
Sjobergs Elite 1500 Bench & Storage Module SM03
EUROPEAN BENCH MAKING AT ITS FINEST!
Sjobergs Elite cabinetmaker benches are constructed in entirely European beech renowned for its toughness and longevity. The top is 85mm thick with a 110mm apron, ready treated with a premium quality enriching finishing oil. The specially developed vices provide enormous clamping power across their 740mm (23½") width as well as accuracy and smoothness....
Sjobergs Elite 2000 Bench & Storage Module SM04
EUROPEAN BENCH MAKING AT ITS FINEST!
Sjobergs Elite cabinetmaker benches are designed and built by experienced Swedish craftsmen. Constructed in European beech; the top is 85mm thick with a 110mm apron, ready treated with a premium quality enriching finishing oil. The specially developed vices provide enormous clamping power across their 600mm (23½") width, as well as providing amazing...
Sjobergs Nordic 1450 Bench & Storage Module 0042
The sturdy underframe of this Sjobergs Nordic Plus 1450 bench is made from Scandinavian pine and with the hard Nordic birch top the bench is built to last a lifetime of normal use. A double row of 19mm (3/4") dog holes run from each of the four vice locations, giving an endless opportunity to clamp your work. There are four mounting locations for the vices allowing you to configure the vices to...
Sjobergs Original 1900 Bench & Storage Module SM05
EUROPEAN BENCH MAKING AT ITS FINEST!
Package deal comprises a Sjobergs SB119 Professional Workbench and a Sjobergs SM05 Storage Module.
The Sjobergs SB119 bench is the perfect foundation for any workshop. Versatility combines with strength and quality, to form a highly functional bench for a professional or a demanding home woodworker. The selected European beech used throughout the construction...
Sjobergs Scandi 1425 Bench & Storage Module SM03
Sjobergs Scandi Plus 1425 workbench is made from European beech (trestle is pine), this bench storage module package is built to last a lifetime of normal use. A double row of 19mm (3/4") dog holes run from each of the 4 vice locations, giving endless opportunities to clamp your work. This Scandi Plus bench comes with the SM03 beech fronted accessory cupboard and drawer kit. (SM03 worktop area:...
Veritas 3/4'' Surface Clamp
Hold down, bench clamp or surface clamp - the functions are the same just the name changes. True to form Veritas have taken an ordinary thing and made it much, much better - as well as a thing of beauty in brass and black satin.
These fast acting surface clamps can be used anywhere you can drill a 19mm diameter hole. The post has a wedging mechanism which anchors it firmly (horizontally or vertically)...
Veritas Bench Dogs & Pups
These are made from solid brass rod. Sold in pairs.
The crosshatching and 2° slope on the face help to hold wood securely, pulling it down onto the bench's surface. A side spring slides cleanly and holds it in position.
The dogs are 110mm (4.3/8") long, the pups 60mm (2.3/8").
Both work well in combination with Veritas Wonder Dog and Wonder Pup Clamps. For 19mm (3/4")...
Veritas Bench Hold Down
The Veritas hold-down can clamp workpieces to a bench or anywhere a 3/4" hole can be drilled.
Exceptionally high clamping forces can be obtained with this hold-down for two reasons. First, with the arm free to pivot independently, all levered forces are exerted downward, without any losses due to horizontal slippage from the canting action of the hold-down post. Second, the fine barb-shaped grooves...
Veritas Carvers Screw
Turned from a solid bar of brass, this carver's screw, with its tapered tip and high-profile threads, grips securely and guarantees that remounted pieces are held as securely the third and fourth time as they were the first.
The hex portion clamps securely in a vice while you thread on a blank, or you can use a spanner. The moulded tightening knob has a low-friction brass insert. At 5" long overall,...
Veritas Front Vice - Large
This vise has rugged, machined, double guide rods and a single-lead Acme screw.
The large front vise is 10-1/2" × 21" overall with a 1-1/8" dia. screw, and 13" clamping capacity (less the thickness of your wooden jaws). The larger vise has an offset center screw to allow vertical clamping without skewing.
Can be added to an existing bench or built into a new one.
Mounting screws included.
Made...