Sort By
Per Page
View
Grid
List
Japanese Waterstones - Toishi-Ohishi
Toishi-Ohishi offer 7 single grit stones and 6 combination stones.
These stones are 8" (205mm) long, 3 inches (75mm) wide and a minimum of 1" (25mm) thick*.
The 3" (75mm) width makes them particularly useful when honing wide plane blades, knives or cut throat razors.
*Stone sizes:
220 grit - 205 x 80 x 35mm
All other single grit stones 205 x 75 x 25mm
Combination stones...
Japanese Waterstones - Toishi-Ohishi - 2 Stone Bundle
A very popular combination of Japanese waterstones. The 1000 grit is a singular grit stone which is ideal for honing the bevel before polishing on the 3000/8000 grit combi. Both stones are 25mm deep, by 75mm wide by 204mm long.
Nagura Stone
The Nagura correcting stone is used to condition waterstones during use. For natural waterstones their use is to wear away hard particles or contamination in the waterstone, and to selectively allow flattening by being rubbed on a high spots on the stone. Another usage is to create slurry. Use with Ohishi stones of more than 1000 grit.
Nagura Stone size: 75 x 25 x 25mm
Set of 7 Single Grit Toishi + Nagura Stone
This set includes 7 single grit stones and the Nagura correcting stone.
These stones are 3 inches (75mm) wide which is particularly useful when honing wide plane blades, knives or cut throat razors.
These stones cut quickly but are dense and hard enough not that most of the them do not require soaking prior to use (the exceptions are the 220 & 600 grits). A sprinkle of water is all you need...
Stone Flattener
Length 400 mm, width 100 mm including glass plate and sanding paper. It is important to flatten your sharpening stone periodically.
Comes with 1 piece each of 60 and 80 grit paper. Abrasive is sticky backed to attach to the flattening block.
Sandpaper for Stone Flattener
1 piece each of 60 and 80 grit paper for the flattening block. Abrasive is sticky backed to attach to the flattening block.