Sort By
Per Page
View
Grid
List
Henry Taylor Small Slipstone
One of 2 slipstones made by Henry Taylor, this one measures 55 x 20mm and tapers from 4mm to 1mm in thickness.
Henry Taylor Woodcarving Punch - Triangle of Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor No.11 Straight Gouge - 1' (25mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Henry Taylor Woodcarving Punch - Square Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Large Slipstone
One of 2 slipstones made by Henry Taylor, this one measures 115 x 45mm and tapers from 11mm to 4mm in thickness.
Henry Taylor No. 1 Allongee Chisel - 1 1/4'' (32mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Henry Taylor Woodcarving Punch - Triangle
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Slipstone Set
Set of 2 slipstones made by Henry Taylor.
The large one measures 115 x 45mm and tapers from 11mm to 4mm in thickness and the small one 55 x 20mm tapering from approx 4mm to 1mm.
Henry Taylor Bevel Edge Chisels
Henry Taylor standard bevel edge chisels. The blade length is approx 5" (125mm) with stained hardwood handles and brass ferrules.
Made in Sheffield, England for over 150 years.
F55 - 1/4" (6mm)
F56 - 3/8" (9mm)
F57 - 1/2" (12mm)
F59 - 3/4" (19mm)
F60 - 1" (25mm)
Henry Taylor No.3 Allongee Gouge - 2' (50mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Henry Taylor Woodcarving Punch - Asterisk with solid centre
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Bevel Edge Chisels Set of 5
Henry Taylor standard bevel edge chisels. The blade length is approx 5" (125mm) with stained hardwood handles with brass ferrules.
Made in Sheffield, England for over 150 years.
F55 - 1/4" (6mm)
F56 - 3/8" (9mm)
F57 - 1/2" (12mm)
F59 - 3/4" (19mm)
F60 - 1" (25mm)
As recommended by Simon Frost in September 2021 issue of The Woodworker.
Supplied with a...
Henry Taylor No.4 Allongee Gouge - 2' (50mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Henry Taylor Woodcarving Punch - Chain Link 1
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor No.5 Allongee Gouge - 2' (50mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Henry Taylor Bowl Adze
Sheffield made hand forged adzes by Henry Taylor for single handed use.
This one is a tight gouge (sweep 9), however this lucky fella is outcannel which makes it a Bowl Adze.
At the other end to the cutting edge is a square faced hammer poll.
All Henry Taylor adzes have an ash handle of 250mm (about 10") .
The overall head size (from the square face of the hammer poll to the cutting edge)...
Henry Taylor Woodcarving Punch - Circle
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor No.7 Allongee Gouge - 2' (50mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Henry Taylor Woodcarving Punch - Flower 1
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Cranked Bevel Edge Paring Chisels
The Henry Taylor bent, or 'cranked neck' design of these special paring chisels allows the craftsman to use the chisel with the blade absolutely flat on the stock at all times.
Blade about 8¾" long.
Henry Taylor No.8 Allongee Gouge - 2 1/2' (63mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Henry Taylor Woodcarving Punch - Moon
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Cranked Bevel Edge Paring Chisels Set of 5
The Henry Taylor bent, or 'cranked neck' design of these special paring chisels allows the craftsman to use the chisel with the blade absolutely flat on the stock at all times.
Blade about 8¾" long.
Set includes 1/4", 1/2", 3/4", 1" and 1 1/4" chisels.
Henry Taylor No.7 Long Bent Gouge - 1 1/2'' (38mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Henry Taylor Woodcarving Punch - Chain Link 2
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor No.10 Long Bent Gouge - 1' (25mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Henry Taylor Woodcarving Punch - Thistle
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor No.39 60° 'V' Parting Tool - 3/4' (20mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Henry Taylor Hand Adze Deep Curved Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes; this one is a tight incannel gouge (sweep 9), and is offered with an incannel or outcannel grind.
The outcannel grind is favoured by those working concave surfaces as it allows the leading edge to enter the working area easier.
At the other end to the cutting edge is a square faced hammer...
Henry Taylor Woodcarving Punch - Clover Leaf
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Sculpture Tools - Set of 10
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Please note the picture still shows the original set of 11 - the set now does not include the large spoon bent gouge.
Henry Taylor Hand Adze Shallow Curved Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes, this one a gouge end with a shallow/mid gouge or there is a tight gouge (sweep 9) and a 50mm (2") straight edge (like a chisel).
At the other end to the cutting edge is a square faced hammer poll.
All the adzes have an ash handle of 250mm (about 10") .
The overall head size (from the...
Henry Taylor Woodcarving Punch - Diamond
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Hand Adze Straight Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes, this one a 50mm (2") straight edge (like a chisel) or curved end (like a gouge) with either a shallow/mid gouge or a tight gouge (sweep 9).
At the other end to the cutting edge is a square faced hammer poll.
All the adzes have an ash handle of 250mm (about 10") .
The overall head size...
Henry Taylor Woodcarving Punch - Cross 1
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Heavy Duty Socket Firmer Chisels
These Henry Taylor chisels have a thicker and longer socket than their bevel edge chisels. This gives them added strength and durability which makes them popular with timber framers.
The handle is made from Ash and has a heavy brass hoop. The handles are hard wearing but should you need to change a handle it is easy to do so with the socketed design. Replacement handles can be made or purchased.
Forged...
Henry Taylor Woodcarving Punch - Anchor
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Heavy Duty Socket Firmer Chisels Set of 4
These Henry Taylor chisels have a thicker and longer socket than their bevel edge chisels. This gives them added strength and durability which makes them popular with timber framers.
The handle is made from Ash and has a heavy brass hoop. The handles are hard wearing but should you need to change a handle it is easy to do so with the socketed design. Replacement handles can be made or purchased.
Forged...
Henry Taylor Woodcarving Punch - Flower 2
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Incannel Firmer Gouges
Henry Taylor standard length carpenters chisels with gouge shaped blades. Incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F11 - 1/4" (6mm)
F12 - 3/8"...
Henry Taylor Woodcarving Punch - Tipped Cross
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Incannel Firmer Gouges Set of 6
Henry Taylor standard length carpenters chisels with gouge shaped blades. Incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F11 - 1/4" (6mm)
F12 - 3/8"...
Henry Taylor Woodcarving Punch - Tree
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Acorn
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Long Thin Bevel Edge Paring Chisels
These Henry Taylor long thin bevel edge paring chisels have relatively thin blades that taper towards the cutting edge.
Blade about 8¾" long.
Henry Taylor Woodcarving Punch - Double Diamond
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Long Thin Bevel Edge Paring Chisels Set of 5
These Henry Taylor long thin bevel edge paring chisels have relatively thin blades that taper towards the cutting edge.
Blade about 8¾" long.