Category
Brand
Price
Additional Filters
196 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
10 Lie-Nielsen Chisels (with Afrcian Blackwood Handles) [Preowned, Unused, SOLD]10 Lie-Nielsen Chisels (with Afrcian Blackwood Handles) [Preowned, Unused, SOLD]
Sold
10 Lie-Nielsen Chisels (with Afrcian Blackwood Handles) [Preowned, Unused, SOLD]
Pre-owned, about 12 years old but unused. 10 bevel edge chisels by Lie-Nielsen Toolworks with specially commissioned African Blackwood handles made by Blue Spruce Toolworks. These beauties are possibly a unique combination. This is a commission sale on behalf of a great customer of ours who feels they should go to a good home where someone will put them to good use. All the chisels are supplied...
£1,800.00 (VAT exempt)
Blue Spruce Toolworks - Marking Knives & Awl Set (with African Blackwood Handles) [Preowned, SOLD]Blue Spruce Toolworks - Marking Knives & Awl Set (with African Blackwood Handles) [Preowned, SOLD]
Sold
Blue Spruce Toolworks - Marking Knives & Awl Set (with African Blackwood Handles) [Preowned, SOLD]
These are the earlier made marking knives and awl with fixed blades/point into brass ferrules with beautifully turned African blackwood handles. Large marking knife Small Marking Knife Small awl. In the original Blue Spruce Box. Seemingly unused. A commission sale.
£285.00 (VAT exempt)
Blue Spruce Toolworks Ultimate Coping Saw [Preowned, Unused, SOLD]Blue Spruce Toolworks Ultimate Coping Saw [Preowned, Unused, SOLD]
Sold
Blue Spruce Toolworks Ultimate Coping Saw [Preowned, Unused, SOLD]
A lightweight maple handled 3" throat coping saw with 8 possible lockable settings for your blade or you can unlock the thumbwheels so the blade, blade clamps and sleeves rotate freely while cutting. This saw also has the adaptors to house pin-less saw blades. 3 blades included. Here is what Blue Spruce Toolworks say about the saw... "Coping saws have always had a dilemma. Curved...
£250.00 (VAT exempt)
Blue Spruce Toolworks Optima Chisel Plane (Straight blade - Rosewood Tote) [Preowned, Unused, SOLD]Blue Spruce Toolworks Optima Chisel Plane (Straight blade - Rosewood Tote) [Preowned, Unused, SOLD]
Sold
Blue Spruce Toolworks Optima Chisel Plane (Straight blade - Rosewood Tote) [Preowned, Unused, SOLD]
This is not the standard Blue Spruce chisel plane with the straight blade and resin infused maple tote, this one has a darker tote, probably rosewood. All original. "Reach for it anytime you need to trim plugs, end grain, pare away joinery surfaces, clean glue squeeze-out, and more. It thrives in wide-open plywood projects and confined casework. The elevated handle allows the iron to lie flat - a...
£125.00 (VAT exempt)
Stanley No.50 Combination Plane [Preowned, Unused, SOLD]Stanley No.50 Combination Plane [Preowned, Unused, SOLD]
Sold
Stanley No.50 Combination Plane [Preowned, Unused, SOLD]
It is quite easy to find this plane on reselling sites like Ebay etc. However, unlike many of the examples on those sites, this Stanley No.50 Combination plane is in unused, "as new" condition, in its original box (this has been drawn on in felt tip pen), with instruction leaflet, with the 17 cutters in the wooden cutter holder, has both spurs and the nickel plating is 95+ untarnished. 9 plough/dado...
£135.00 (VAT exempt)
Tite Mark Glen-Drake Standard Marking Gauge [Preowned, SOLD]Tite Mark Glen-Drake Standard Marking Gauge [Preowned, SOLD]
Sold
Tite Mark Glen-Drake Standard Marking Gauge [Preowned, SOLD]
Pre-owned in little used condition. The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head. The Tite-Mark Standard...
£95.00 inc VAT
Tite Mark Long Marking Gauge [Preowned, SOLD]Tite Mark Long Marking Gauge [Preowned, SOLD]
Sold
Tite Mark Long Marking Gauge [Preowned, SOLD]
Pre-owned in little used condition. The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with a brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head. The Tite-Mark...
£100.00 inc VAT
Tite-Mark Glen-Drake Mini Marking Gauge (with marking and mortise blade sets) [Preowned, SOLD]Tite-Mark Glen-Drake Mini Marking Gauge (with marking and mortise blade sets) [Preowned, SOLD]
Sold
Tite-Mark Glen-Drake Mini Marking Gauge (with marking and mortise blade sets) [Preowned, SOLD]
Pre-owned in very good condition. The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks (both from the USA). NOTE - This mini tite-mark marking gauge is no longer in production. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with a brass body and fixed circular A2 blade hardened...
£115.00 inc VAT
Lie-Nielsen No.103 Bronze Standard Angle Block Plane [Preowned, Unused, SOLD]Lie-Nielsen No.103 Bronze Standard Angle Block Plane [Preowned, Unused, SOLD]
Sold
Lie-Nielsen No.103 Bronze Standard Angle Block Plane [Preowned, Unused, SOLD]
This standard angle block plane has been discontinued for some time from Lie Nielsen Toolworks. They have now entered the "collectible" category and if that's your interest or just that you want to use this plane then it's deep pocket time (sorry!). It is identical in size to the low angle version (the 102) but the blade is bedded at 20 degrees which may appeal when working difficult timbers. This...
£275.00 inc VAT
Woodpeckers Box Clamps - Set of 4 [Preowned, SOLD]Woodpeckers Box Clamps - Set of 4 [Preowned, SOLD]
Sold
Woodpeckers Box Clamps - Set of 4 [Preowned, SOLD]
The Woodpeckers Box Clamp is designed for clamping cases, drawers, cabinets and most other boxes made from material 1/4" - 1" thick. Its main advantage is its ability to apply simultaneous in and downward pressure against 2 perpendicular pieces. The box clamp can be assembled in "fixture mode" or "hand clamp mode"- either way it works the same with the difference being from which side of the clamp...
£75.00 (VAT exempt)
Woodpeckers Corner Jig (with 12 Radius and 6 Chamfer Attachments) [Preowned, SOLD]Woodpeckers Corner Jig (with 12 Radius and 6 Chamfer Attachments) [Preowned, SOLD]
Sold
Woodpeckers Corner Jig (with 12 Radius and 6 Chamfer Attachments) [Preowned, SOLD]
12 Radius templates (originally sold with 16, however this set does not include the 4 biggest sizes) 6 chamfer templates Here is some video information that shows you how useful this jig could be. Radius or Chamfered corners? The choice is yours with Woodpeckers Corner Jig Corner Jig | Woodpeckers Woodworking Tools Only one of the radius corners seems to have been well used, only a...
£225.00 (VAT exempt)
Woodpeckers Equal Space Divider [Preowned, SOLD]Woodpeckers Equal Space Divider [Preowned, SOLD]
Sold
Woodpeckers Equal Space Divider [Preowned, SOLD]
This very handy tool divides your space into 6 equal parts from 3/4" (20mm) to 4" (100mm) Based on the mathematical theory of the parallelogram this tool has arms that always move parallel to each other and stay perpendicular to the target line which allows you to be able to draw a line instead of just a point. Laser cut from stainless spring steel with Swiss machined precision pins made to very exacting...
£88.00 (VAT exempt)
Woodpeckers - Setup Blocks (Metric) - 10pc Set [Preowned, SOLD]Woodpeckers - Setup Blocks (Metric) - 10pc Set [Preowned, SOLD]
Sold
Woodpeckers - Setup Blocks (Metric) - 10pc Set [Preowned, SOLD]
Woodpeckers Precision Setup Blocks Beat a Tape Measure Every Time Stop Squinting! Have you noticed that as the years go by, the marks on rules and tapes seem to get closer and closer together? Uncle Albert has had this problem for a long time now. Here’s a way to get those tiny lines out of your life when working on critical machinery set ups. Woodpeckers Setup Blocks give you precise physical references...
£80.00 (VAT exempt)
Woodpeckers Pocket Compass Set [Preowned, SOLD]Woodpeckers Pocket Compass Set [Preowned, SOLD]
Sold
Woodpeckers Pocket Compass Set [Preowned, SOLD]
Little used, no case. PCOMP21-SET. Composed of Pocket Compass XL & Pocket Compass. Metric & Imperial Scaling. A traditional divider-style two-legged compass leaves a lot to be desired in a woodworking shop. The slightest nudge can change the setting. The pivot point is approaching the stock at an angle, so it likes to skate out of position. And, they’re just plain awkward to carry around (not...
£85.00 (VAT exempt)
Woodpeckers Saddle Square - TS150 [Preowned, SOLD]Woodpeckers Saddle Square - TS150 [Preowned, SOLD]
Sold
Woodpeckers Saddle Square - TS150 [Preowned, SOLD]
Edge markings to 170mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil (see our excellent Pentel Graphgear pencils) . Laying down a line parallel to the edge of your stock is as simple as finding the hole...
£60.00 (VAT exempt)
Woodpeckers 300mm Precision Square (No.1281) [Preowned, SOLD]Woodpeckers 300mm Precision Square (No.1281) [Preowned, SOLD]
Sold
Woodpeckers 300mm Precision Square (No.1281) [Preowned, SOLD]
The core of the 1281 is a precisely machined square milled from cast and ground tool plate......the most stable aluminium in the world. The stability of the material and the methods Woodpeckers use to machine the core mean they all hold the tolerance to +/-.0085°. To this highly accurate core they add cheeks to make the base thicker. Metric graduations One piece central core Cheeks are narrower...
£120.00 (VAT exempt)
Woodpeckers 200mm Precision Square (No.851) [Preowned, SOLD]Woodpeckers 200mm Precision Square (No.851) [Preowned, SOLD]
Sold
Woodpeckers 200mm Precision Square (No.851) [Preowned, SOLD]
What sets Woodpeckers squares above the rest is their one-piece central core design. Rather than a blade attached to a beam, as you will find in most try-squares of this size, the 851 has one piece of tool plate aluminium meticulously machined into a square. Then cheeks are added to the central core with stainless steel location pins. The cheeks are 1/4'' (6mm) narrower than the central core, forming...
£100.00 (VAT exempt)
Woodpeckers 150mm Precision Square (No. 641) [Preowned, SOLD]Woodpeckers 150mm Precision Square (No. 641) [Preowned, SOLD]
Sold
Woodpeckers 150mm Precision Square (No. 641) [Preowned, SOLD]
What sets Woodpeckers squares above the rest is their one-piece central core design. Rather than a blade attached to a beam, as you will find in most try-squares of this size, the 641 has one piece of tool plate aluminium meticulously machined into a square. Then cheeks are added to the central core with stainless steel location pins. The cheeks are 1/4'' (6mm) narrower than the central core, forming...
£80.00 (VAT exempt)
2 Woodpeckers Metric Carpenter's Squares & Mini Square Bundle [Preowned, SOLD]2 Woodpeckers Metric Carpenter's Squares & Mini Square Bundle [Preowned, SOLD]
Sold
2 Woodpeckers Metric Carpenter's Squares & Mini Square Bundle [Preowned, SOLD]
Pre-owned, commission sale. All 3 squares are in excellent condition with minor cosmetic blemishes. 150mm & 95mm Carpenter's Squares & The Mini Square All made by Woodpeckers USA. Both of these One-Piece Carpenter Squares have an engraved scale along the vertical edge and the 150mm also has the most common angles marked (18, 22-1/2, 30, 45, 60, 67.5, 72). Metric graduations every millimetre. The...
£88.00 (VAT exempt)
Woodpeckers 6SS Carpenters Square [Preowned, SOLD]Woodpeckers 6SS Carpenters Square [Preowned, SOLD]
Sold
Woodpeckers 6SS Carpenters Square [Preowned, SOLD]
The fixed 90° and 45° angles are accurate to within .0085° or better. The square’s stout construction, including a stainless steel blade, means it will last a lifetime and never lose tolerance. The tool’s aluminum handles are registered on the base of the square with precision-milled, tight-tolerance steel pins, then fastened with stainless steel socket head screws. Woodpeckers Model 6SS Carpenters...
£88.00 (VAT exempt)
Lie-Nielsen Toolworks - Metric Dowel Plate [Preowned, Unused, SOLD]Lie-Nielsen Toolworks - Metric Dowel Plate [Preowned, Unused, SOLD]
Sold
Lie-Nielsen Toolworks - Metric Dowel Plate [Preowned, Unused, SOLD]
Pre-owned but unused in original packaging (2021) This is from our description on our main site where the dowel pate is available for £106 "If you want to make exact-size dowels from any wood you choose, a Lie-Nielsen Dowel Plate is the best tool. It's also handy to get a precise tenon on chair spindles. The Lie Nielsen plates are 1/4" x 5-5/8" x 1½" surface ground A2 tool steel. The holes are...
£88.00 (VAT exempt)
Woodpeckers OneTIME Tool - 36'' Steel Straight Edge [Preowned, SOLD]Woodpeckers OneTIME Tool - 36'' Steel Straight Edge [Preowned, SOLD]
Sold
Woodpeckers OneTIME Tool - 36'' Steel Straight Edge [Preowned, SOLD]
This 36" pre-owned steel straight edge is 7/32'' thick by 2 1/2'' wide Heavy duty to check for flatness with a miserly 0.0002'' tolerance per foot In very good condition. This tool was discontinued by Woodpeckers about 4 years ago.
£85.00 (VAT exempt)
A Descent of Woodpeckers! - 4 Rule Bundle [Preowned, SOLD]A Descent of Woodpeckers! - 4 Rule Bundle [Preowned, SOLD]
Sold
A Descent of Woodpeckers! - 4 Rule Bundle [Preowned, SOLD]
A group of Woodpeckers hanging together is known as a “descent.” This makes sense because most Woodpeckers start at the top of trees and then continue to work their way down. If you see a group of Wrens together, then you are witnessing a “herd” or “chime” of Wrens. A group of bullfinches is called a "bellowing". 6 pre-owned Woodpeckers tools! Woodpeckers 300, 600, 900 & 1200mm rules. Woodpeckers...
£250.00 (VAT exempt)
Lie-Nielsen Bevel Edge Chisels (O1 Steel) - Set of 5 in leather roll [Preowned, Unused, SOLD]Lie-Nielsen Bevel Edge Chisels (O1 Steel) - Set of 5 in leather roll [Preowned, Unused, SOLD]
Sold
Lie-Nielsen Bevel Edge Chisels (O1 Steel) - Set of 5 in leather roll [Preowned, Unused, SOLD]
5 chisels in O1 steel. 1/8", 1/4", 3/8", 1/2" & 3/4" wide. Lie-Nielsen Leather tool roll. Most bench chisel makers now use A2 steel (or in the case of Veritas, PMV11), in the making of their chisels. Basically this steel offers an improvement in edge retention although it is more difficult to sharpen. O1 steel, on the other hand, is still preferred by many for...
Was £495.00 Now £475.00 inc VAT
Flexcut Carving Tools - Set of 9 Box [Preowned, Unused, SOLD]Flexcut Carving Tools - Set of 9 Box [Preowned, Unused, SOLD]
Sold
Flexcut Carving Tools - Set of 9 Box [Preowned, Unused, SOLD]
The sets comprises: No.2 15mm gouge No.3 12mm gouge No.3 18mm gouge No.6 21mm gouge No.8 22mm gouge No.9 14mm gouge No.11 12mm gouge 22mm back bent gouge 16mm 70 degree V parting tool These tools have long fixed handles and the set is described (poorly) as a Deluxe Power Handle Set LH100. They are better described as a set of handled carving tools for larger scale work...
£120.00 inc VAT
Veritas Optical Center Punch 05N59.01 [Preowned, Unused, SOLD]Veritas Optical Center Punch 05N59.01 [Preowned, Unused, SOLD]
Sold
Veritas Optical Center Punch 05N59.01 [Preowned, Unused, SOLD]
This is now discontinued by its makers who said this about it...(apologies for the misspelling of the word centre!) ''To keep a twist drill from skating on metal (and leaving you with a hole in the wrong place) you should always use a center punch, especially when using small flexible bits. The dimple created by the punch holds the bit point true. The Veritas optical center punch simplifies...
£30.00 inc VAT
Veritas Magnetic Rule Magnifier 05N5701 [Preowned, Unused, SOLD]Veritas Magnetic Rule Magnifier 05N5701 [Preowned, Unused, SOLD]
Sold
Veritas Magnetic Rule Magnifier 05N5701 [Preowned, Unused, SOLD]
The rare earth magnets in the 28mm diameter base which holds a short post that has a magnet at its head to hold the magnifier. This allows you to accurately read small measurements on your steel rule. (See photo - steel rule not included in the sale) Unused in original box
£24.00 inc VAT
2x Wonder Dogs & 2x Bench Dogs - Veritas [Preowned, SOLD]
Sold
2x Wonder Dogs & 2x Bench Dogs - Veritas [Preowned, SOLD]
The Wonder Dog by Veritas is a steel post and screw with black oxide finish, solid brass clamp head and handle. The Wonder Dog can pivot in any direction that clamping is required. An easy-adjusting handle provides ample clamping pressure in any position. The dog head has two screw holes, so any tip shape can be cut with a scroll saw and attached for specialized work. The Wonder Dog post is 6...
£75.00 inc VAT
Eclipse No: 230 Engineers 1 1/2'' Vee blocks and clamp [Preowned, SOLD]Eclipse No: 230 Engineers 1 1/2'' Vee blocks and clamp [Preowned, SOLD]
Sold
Eclipse No: 230 Engineers 1 1/2'' Vee blocks and clamp [Preowned, SOLD]
Pre-owned but in excellent, possibly unused condition.
£48.00 inc VAT
Record Imp No. 80 Vice [Preowned, SOLD]Record Imp No. 80 Vice [Preowned, SOLD]
Sold
Record Imp No. 80 Vice [Preowned, SOLD]
Smooth working vice with anvil. This is a genuinely good and original example of this handy little beastie. It is designed to clamp to your workbench and has 2 1/4'' jaws that open to about 2 3/4''.
£42.00 inc VAT
Swan Neck Lock Mortise Chisel 3/8'' [Preowned, SOLD]Swan Neck Lock Mortise Chisel 3/8'' [Preowned, SOLD]
Sold
Swan Neck Lock Mortise Chisel 3/8'' [Preowned, SOLD]
14 1/2'' overall with a lovely beech handle. Stamped "I Sorby" on the steel. This hasn't done any work in our opinion and is in G++ condition
£36.00 inc VAT
Lie-Nielsen Toolworks No.140 Skew Block Plane (Bronze) with fence [Preowned, Unused SOLD]Lie-Nielsen Toolworks No.140 Skew Block Plane (Bronze) with fence [Preowned, Unused SOLD]
Sold
Lie-Nielsen Toolworks No.140 Skew Block Plane (Bronze) with fence [Preowned, Unused SOLD]
Right handed and knickered. Pre-owned but in "as new" condition. Supplied with a Lie-Nielsen plane sock (no box). Lie-Nielsen Toolworks based this plane on the Stanley 140. It is designed to deal with difficult woods using a combination of a low angle approach, shear cutting action from the skewed blade, and extra weight of the bronze body. A retractable nicker scores the cross...
Was £475.00 Now £450.00 inc VAT
Lie-Nielsen Squirrel Tail Model Maker's Block Planes - No.100 & No.100 1/2 [Preowned, Unused, SOLD]Lie-Nielsen Squirrel Tail Model Maker's Block Planes - No.100 & No.100 1/2 [Preowned, Unused, SOLD]
Sold
Lie-Nielsen Squirrel Tail Model Maker's Block Planes - No.100 & No.100 1/2 [Preowned, Unused, SOLD]
These two beauties haven't been manufactured by Lie-Nielsen Toolworks for some years. They are pre-owned but we don't think they have been used. The 100 Flat sole This delightful, small tool fits snugly in the palm of your hand. It is a miniature work-horse — ideal for all sorts of chamfering and trimming jobs. Overall length, including the squirrel-tail handle, is 4 7/8"....
£250.00 inc VAT
Lie Nielsen Toolworks - Boggs Spokeshave - Curved [Preowned, Unused, SOLD]Lie Nielsen Toolworks - Boggs Spokeshave - Curved [Preowned, Unused, SOLD]
Sold
Lie Nielsen Toolworks - Boggs Spokeshave - Curved [Preowned, Unused, SOLD]
Pre-owned but unused. Note: the curve on this spokeshave is extremely shallow. The Boggs Spokeshave is hefty and solid, weighing 12oz. Designed for fine, precise shaping in all woods. Body is 10" long with a 1" wide very slightly curved sole. The sole of this spokeshave has a gentle (almost imperceptible) 5 degree radius for working inside curves. 2" wide x 1/8" thick...
£150.00 inc VAT
TASAI Japanese Chisel (24mm) - Damascus Steel (Mokume) & Sandalwood Handle [Preowned, Unused, SOLD]TASAI Japanese Chisel (24mm) - Damascus Steel (Mokume) & Sandalwood Handle [Preowned, Unused, SOLD]
Sold
TASAI Japanese Chisel (24mm) - Damascus Steel (Mokume) & Sandalwood Handle [Preowned, Unused, SOLD]
Blue steel cutting edge made of Tasai special blue steel, a custom made steel for master blacksmith Tasai which is laminated onto the special multi-layer core ''Mokume pattern'' The handle is made of sandalwood (and still has its protective film covering it which we have decided not to remove to allow you the privilege. However the photo will show a glaze rather than the true colour of the handle). We...
£235.00 (VAT exempt)
Lie-Nielsen Low Angle Jack Plane - LN 62 (with additional toothing blade) [Preowned, Unused, SOLD]Lie-Nielsen Low Angle Jack Plane - LN 62 (with additional toothing blade) [Preowned, Unused, SOLD]
Sold
Lie-Nielsen Low Angle Jack Plane - LN 62 (with additional toothing blade) [Preowned, Unused, SOLD]
This is a commission sale and in his notes our customer has advised that this plane has had very little use at all. Well, as the plane is still in its undisturbed paper wrapping within its blue sealed bag and original box, we respectfully disagree. This plane has yet to see the light of day and it is unused! Also comes with an unused toothing plane blade (Toothed blades have small chisel-like teeth...
£350.00 (VAT exempt)
Set of 7 - Clifton Anniversary Planes [Preowned, Unused]Set of 7 - Clifton Anniversary Planes [Preowned, Unused]
Set of 7 - Clifton Anniversary Planes [Preowned, Unused]
A wonderful set of 7 Limited Edition Clifton Anniversary Planes 2010. One of 12 full sets known to have been sold from this Sheffield planemaker. (Note - Classic Hand Tools sold the vast majority of the planes when they were launched as a limited edition, so we are very confident of our numbers). You are buying a small slice of the long history of toolmaking in Sheffield, England. This...
£4,000.00 (VAT exempt)
6 Marples Paring Chisels (from 1/4'' to 1 1/2'' wide) [Preowned, SOLD]6 Marples Paring Chisels (from 1/4'' to 1 1/2'' wide) [Preowned, SOLD]
Sold
6 Marples Paring Chisels (from 1/4'' to 1 1/2'' wide) [Preowned, SOLD]
These are boxwood handled chisels have overall lengths between 330mm and 400mm Pre-owned but these have seen little use. 1/4'', 3/8'', 5/8'', 3/4'', 1'' & 1 1/4''
£180.00 (VAT exempt)
File Sets
30%
OFF
Percent Off
File Sets
The RH Preyda File Sets, made from prized Arkansas Novaculite, are essential for deburring, chamfering, and creating smooth finishes. These files are highly valued by craftsmen such as gunsmiths, dentists, machinists, and jewelers. File shapes: Round, Square, Triangular, and Knife Blade Size: 4" x 3/8" (101.6mm x 9.5mm) Grit options: Soft (400-600), Hard (800-1000), Surgical Black...
Was £51.00 Now from £35.70 inc VAT
Set of 10 Marples Bevel Edge chisels [Preowned, SOLD]Set of 10 Marples Bevel Edge chisels [Preowned, SOLD]
Sold
Set of 10 Marples Bevel Edge chisels [Preowned, SOLD]
These have been very little used and show no sign of wear. The original grinding marks are still on show. The set graduates from 1/8" through to 2" as follows. 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2" & 2" Most of them have their edge guards. Brass ferrules (one has split) Boxwood handles.
£245.00 (VAT exempt)
Knife Blade Files
25%
OFF
Percent Off
Knife Blade Files
Prized by craftsmen worldwide, Arkansas Novaculite is the only known substance that can sharpen a blade and polish it as well. These Multi-Form Files are designed to accommodate the various shapes and gauges of V-tools. The dimensions and specifications of each stone will match tools ranging from ultra-flat to semi-circular and a variety of curves in between. Multi-Forms are ideal for sharpening, finishing...
Was £14.40 Now from £10.80 inc VAT
Stanley 444 Dovetail Tongue & Groove Plane [Preowned, Professionally Restored, SOLD]Stanley 444 Dovetail Tongue & Groove Plane [Preowned, Professionally Restored, SOLD]
Sold
Stanley 444 Dovetail Tongue & Groove Plane [Preowned, Professionally Restored, SOLD]
This is a rare beast. This example has been professionally re-nickel plated and 4 new blades have been made to complete the plane. This plane was designed for the precision planing of dovetail joints. The STANLEY 444 Dovetail plane was manufactured between 1912 and 1938 so it is very rare to find something so old in mint condition as the nickel plating always deteriorates over time if the...
£750.00 (VAT exempt)
Square Double Angle Files
25%
OFF
Percent Off
Square Double Angle Files
The Square Double Angle Files offered by Classic Hand Tools are high-quality sharpening tools made from Arkansas Novaculite, a natural material prized for its ability to both sharpen and polish blades effectively. These files are designed to accommodate the various shapes and gauges of V-tools, making them ideal for detailed sharpening, finishing, and maintaining the edges of your tools. Key Features: Material:...
Was £14.40 Now from £10.80 inc VAT
Record No.50 Combination Plane [Preowned, Unused, SOLD]Record No.50 Combination Plane [Preowned, Unused, SOLD]
Sold
Record No.50 Combination Plane [Preowned, Unused, SOLD]
This is in super unused condition with the instruction booklet. The box is a bit tatty with a torn lid but the plane is in fine condition with all the bits n pieces, cutters etc all present and very correct. Pre-owned, commission sale.
£150.00 (VAT exempt)
Mappa Tools 16oz Round MalletMappa Tools 16oz Round Mallet
12%
OFF
Percent Off
Mappa Tools 16oz Round Mallet
These lovely functional mallets, (or bottle hammers as no-one we know calls them), from Mappa Tools in the Netherlands are a good weight at 500g (16oz). These mallets created a bit of a European competition for the Blue Spruce Mallets from the USA. Sadly Mappa, are no longer producing their tools so we cant re-stock from them. Perfect for fine chisel work. It is a tool for the woodworker who...

5

Was £112.00 Now £98.00 inc VAT
Veritas Side Rebate Plane [Preowned, SOLD]Veritas Side Rebate Plane [Preowned, SOLD]
Sold
Veritas Side Rebate Plane [Preowned, SOLD]
Pre-owned plane in original box. Very little used. This is the description of the plane which sells for £163 new. The Veritas Side Rebate Plane is used for cleaning up or trimming sidewalls of rebates, dadoes or grooves to yield a perfect fit with its mate. It has a practical dual-blade configuration, coupled with an ingenious pivoting handle that permits right- or left-hand use to accommodate...
£112.00 (VAT exempt)
Set of 4 Butt Chisels - Pfeil Swiss Made [Preowned]Set of 4 Butt Chisels - Pfeil Swiss Made [Preowned]
Set of 4 Butt Chisels - Pfeil Swiss Made [Preowned]
Set of 4 Butt Chisels - Pfeil Swiss Made Pre-owned but these look unused. Slight staining to the plum wood handles. 6mm, 12mm, 19mm & 25mm 155mm overall length including handle. The 4 chisels come with a wooden storage block.
£72.00 inc VAT
Lie-Nielsen Apron [Preowned, SOLD]Lie-Nielsen Apron [Preowned, SOLD]
Sold
Lie-Nielsen Apron [Preowned, SOLD]
A branded one size fits all Lie Nielsen Toolworks woodshop apron. 1cm tear in the gusset, which would require 3 or 4 tidy stitches to repair. Fraser, our model, has been walking round the carpark sassaying and twirling in a curiously suspicious manner in an attempt to show off the fit and functionality of the apron. Apron only - tools and handsome model not included!
£95.00 (VAT exempt)
Page: 1 | 2 | 3 | 4 | 5 |