Sort By
Per Page
View
Grid
List
Blades for Veritas Low & Standard Angle Block Plane
Replacement blades for the Veritas Low & Standard angle block planes. 1 5/8'' wide.
Bullnose Replacement Iron Ray Iles
This replacement iron fits the Record Bullnose No.s 076, 077, 077A & the equivalent plane by Preston. This iron also fits the Record 311.
These replacement irons are made of high carbon steel which is oil hardened and tempered to 59 - 61 Rockwell C and will have edge keeping qualities equal to the originals.
Handles for Veritas Low-Angle Block Plane
The bevel-up configuration of the Veritas low-angle block plane lets you vary the blade angle to suit the task, from low-angle blades for use on end grain to high-angle blades on figured wood. However, steeper cutting angles require more force to push the plane—a challenge for those with small hands or less strength.
We offer inexpensive hardwood grips to adapt our low-angle block plane into...
Hock Bench Plane Blades
Ron Hock has earned an international reputation for the quality of his plane blades. Ron incorporates the same basic principles as used by 19th Century edge tools makers in his high carbon steel blades and updates these principles in his A2 cryogenically treated steel.
High carbon steel blades are easier to sharpen and will give you a fantastic cuting edge. However they will require more frequent...
Hock Block Plane Blades
Classic Hand Tools offer four block plane blades all of which are 3/32" thick x 4 1/4" long. They will fit Stanley, Record and many other block planes.
Which HOCK blade do I need for my Block Plane?
We offer four different block plane blades in two different alloys.
The first determinant is the blade width, either 1 3/8" or 1 5/8". Check what width of blade you need as...
Hock Chipbreakers
To maximize your plane's performance, a thicker chip breaker (cap iron) can stabilize the blade's cutting edge reducing vibration and chatter. HOCK Chip Breakers are 3mm thick (.118"), almost twice as thick as a stock chip breaker and they come with with a knurled cap screw.
Hock Metal Spokeshave Blades
2 .1/8'' Cutting Edge.
Hock Replacement blades for metal spokeshaves (Type 151) - cryogenically treated A2 blades.
Perhaps the most dramatic improvement can be realised by accurizing and tuning your Spokeshave. It is a mediocre tool as it comes from the factory, but with a quality blade and a little fussing, it becomes a versatile and sensitive tool capable of doing fine work. Stanley...
Hock Blade & Chipbreakers for #10 Rebate Plane
To fit a Stanley or Record #10 rebate plane. 2 1/8'' wide cutting edge.
Ron Hock has earned an international reputation for the quality of his plane blades. Ron incorporates the same basic principles as used by 19th Century edge tools makers in his high carbon steel blades.
High carbon steel blades are easier to sharpen and will give you a fantastic cuting edge. However they will require...
Hock Replacement Blades for Stanley-Style Scraper Planes
The blades for the Stanley No.12 and No.112 Scraper Planes are 3/32" thick by 2-7/8" wide and 5" long with a 45 degree bevel on the cutting edge. Hardened for a balance of long edge life and burr "rollability".
No.80 replacement blade (also fits the Record 080) measures 1/16" X 2-3/4" X 3" long.
No.81 replacement blade measures 1/16" X 2-1/2"...
Spare Blade for Lie-Nielsen Convex Sole Block Plane
Maintain the exceptional performance of your Lie-Nielsen No. 100-1/2 Convex Sole Block Plane with this high-quality replacement blade. Designed specifically for precision and durability, this spare blade ensures your plane continues to deliver smooth, efficient results.
Key Features:
High-Quality Material: Made from A2 cryogenically treated tool steel, this blade is engineered for durability...
Spare Blade for Lie-Nielsen Model Maker's Block Plane
Keep your Lie-Nielsen Model Maker's Block Plane in top condition with this premium replacement blade. Specifically designed for the No. 100 Model Maker's Block Plane, this blade ensures your tool maintains its precision cutting performance.
Key Features:
High-Quality Steel: Made from A2 cryogenically treated tool steel, this blade is engineered for superior edge retention and durability.
Optimized...
Lie Nielsen No.66 Beading Plane: Set of 5 Blank Cutters
Set of 5 blanks. Work with files to create your own shapes. This makes quick work of reproducing small pieces of molding for repair or restoration. Unhardened, 5/8" (1.58cm) wide.
Lie Nielsen No.66 Replacement Blades for L-N66
Seven hardened, double-ended blades will make 14 standard shapes. The blades will fit antique Stanleys as well, for those who have or acquire one without blades. Made from A2 Tool Steel, 5/8" (1.58cm) wide.
The blade profiles include:
1/16", 5/64", 1/8", 5/32", 3/16", and 1/4" Single Beads
3/32" and 1/8" Fluting
1/8" Double Reed
1/16" and 5/64" Triple Reeds
1/16" Quadruple Reed
3/32" Double Concave
3/32"...
Lie-Nielsen 50 Degree Frog
If you prefer a higher angle for your plane blade you can either fit a 50 degree (York Pitch) or a 55 degree (Mid Pitch) frog.
Most planes have their blades at an angle of 45°, known as common pitch. But the famous English Smoothers like Norris are usually 50° (York Pitch) or 55° (Middle Pitch). The higher pitches make smoothing difficult wood easier.
These 50 degree frogs will fit Lie-Nielsen...
Lie-Nielsen 55 Degree Frog
If you prefer a higher angle for your plane blade you can either fit a 50 degree (York Pitch) or a 55 degree (Mid Pitch) frog.
Most planes have their blades at an angle of 45°, known as common pitch. But the famous English Smoothers like Norris are usually 50° (York Pitch) or 55° (Middle Pitch).
The higher pitches make smoothing difficult wood easier.
Spare Blade for Lie-Nielsen Boggs Spokeshaves
Replacement blade for the Curved or Flat Sole Boggs Spokeshaves.
Comes with a 25° flat ground bevel.
* 2" wide x 1/8" thick
* A2 cryogenically treated Tool Steel
Lie-Nielsen Chipbreakers
Fits Lie-Nielsen No. 3 Bench Planes.
Lie-Nielsen chipbreakers are made of High Carbon Tool Steel and are 1/8" thick with a .015" lip ground at a 2 degree angle to provide excellent contact between the leading edge of the chipbreaker and the blade. Very solid. Supplied with the chipbreaker screw.
* 1-3/4" wide
Lie-Nielsen chipbreakers are designed specifically for their tools. It is possible...
Spare Blade for Lie-Nielsen No. 041 Small Shoulder Plane
Replacement blade for Lie-Nielsen No. 041 Small Shoulder Plane. Comes with a 25° flat ground bevel.
5/8" wide x .140" thick
A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 042 Medium Shoulder Plane
Replacement blade for Lie-Nielsen No. 042 Medium Shoulder Plane.
Comes with a 25° flat ground bevel.
* 3/4" wide x .140" thick
* A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 073 Large Shoulder Plane
Replacement blade for Lie-Nielsen No. 073 Large Shoulder Plane.
Comes with a 25° flat ground bevel.
* 1 1/4" wide x .140" thick
* A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 101 Violin Makers Plane
Replacement blade for our No. 101 Violin Maker's Block Plane.
Comes with a 25° flat ground bevel.
* 7/8" wide x 1/8" thick
* A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 102 Low Angle Block Plane
Replacement blade for the Lie-Nielsen No. 102 Low Angle Block Plane.
The 1¼" wide 1/8" thick A2 steel blade comes with a 25° flat ground bevel.
Spare Blade for Lie-Nielsen No. 140 Skew Block Plane RH
Replacement blade for the right hand version of Lie-Nielsen No. 140 Skew Block Plane. Comes with a 25° flat ground bevel.
* 1 1/2" wide x 1/8" thick
* A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 2 Bench Plane
Replacement blade for the Lie-Nielsen No. 2 Bench Plane.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Their heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very...
Spare Blade for Lie-Nielsen No. 3 Smoothing Plane
Replacement blade for Lie-Nielsen No. 3 Bench Plane.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish...
Spare Blade for Lie-Nielsen No. 4 1/2, 5 1/2, 6 & 7 Plane
Replacement blade for Lie-Nielsen No. 4-1/2, 5-1/2, 6 or 7 Bench Planes.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will...
Roughing Blade for Lie-Nielsen No. 4 and 5 Planes
A blade with a cambered edge for the No.4 and No.5 planes. Used for thicknessing boards.
Spare Blade for Lie-Nielsen No. 4 and 5 Plane
Replacement blade for Lie-Nielsen No. 4 or 5 Bench Planes.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror...
Spare Blade for Lie-Nielsen No. 40 1/2 Scrub Plane
Replacement blade for the No. 40-1/2 Scrub Plane. Comes ground with a 3" radius.
* 1.450" wide x 3/16" thick
* A2 Tool Steel
Spare Blade for Lie-Nielsen No. 48 Large Tongue & Groove Plane
For use in Lie-Nielsen No. 48 Tongue & Groove Plane. Centres on ¾" stock, leaving a ¼" wide tongue and .3125" deep grooves. On narrower or wider boards, the tongue will be offset from centre, but still hidden within the joint.
* Comes with a 25° flat ground bevel.
* 3/16" thick, O1 Steel.
!!!!Note:!!!! Blade does not work in vintage Stanley planes.
Spare Blade for Lie-Nielsen No. 49 Small Tongue & Groove Plane
For use in Lie-Nielsen No. 49 Tongue & Groove Plane. Centres on 1/2" stock, leaving a .166" wide tongue and .230" deep grooves. On narrower or wider boards, the tongue will be offset from centre, but still hidden within the joint.
* Comes with a 25° flat ground bevel.
* 3/16" thick, O1 Steel.
!!!!Note:!!!! Blade does not work in vintage Stanley planes.
Spare Blade for Lie-Nielsen No. 507 Rebating Block Plane
Replacement blade for Lie-Nielsen No. 60 1/2 Rebating Block Plane. Comes with a 25° flat ground bevel.
* 1.375" wide x .125" thick
* A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 60 1/2 Block Plane
Replacement blade for Lie-Nielsen No. 60 1/2 Adjustable Mouth Block Plane. Comes with a 25° flat ground bevel.
* 1.375" wide x .125" thick
* A2 cryogenically treated Tool Steel
Toothed Blade for Lie-Nielsen No. 60 1/2 Block Plane
Lie-Nielsen toothed blades have small chisel-like teeth .030" (.762mm) wide, and spaced .030" apart. They are used for heavy stock removal in difficult grain. Follow this with a fine-set Smoothing Plane.
Toothed blades are great for quick, heavy stock removal. However, something like a knot in pine can break the teeth so be careful around difficult spots. We recommend that you hone your...
Toothed Blade for Lie-Nielsen No. 610 Low Angle Jack Rabbet Plane
Image shows non-toothed blade
Toothed Replacement blade for the Lie-Nielsen No. 610 Low Angle Jack Rabbet Plane.
Toothed blades have small chisel-like teeth. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
The blade comes with a 25° flat ground bevel.
The blade comes ready to use, but honing a secondary bevel of 5° or 10° will...
Spare Blade for Lie-Nielsen No. 62 Low Angle Jack Plane
Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane.
The blade comes with a 25° flat ground bevel; it sits in the tool at 12°, making the included cutting angle 37°.
The blade comes ready to use, but honing a secondary bevel of 5° or 10° will increase performance, help achieve a razor edge quickly, and improve edge life in hardwoods.
* 2" wide x .175" thick
* A2 cryogenically...
Toothed Blade for Lie-Nielsen No. 62 Low Angle Jack Plane
Toothed Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane.
Toothed blades have small chisel-like teeth .030" (.762mm) wide, and spaced .030" apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
The blade comes with a 25° flat ground bevel; it sits in the tool at 12°, making the included cutting angle 37°.
The blade comes...
Spare Blade for Lie-Nielsen No. 7 1/2 Low Angle Jointer
Replacement blade for the Lie-Nielsen No. 7½ Low Angle Jointer Plane. Comes with a 25° flat ground bevel.
2.300" wide x .240" thick
A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 8 Jointer Plane
Replacement blade for Lie-Nielsen No. 8 Bench Plane.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish...
Spare Blade for Lie-Nielsen No. 97 1/2 Small Chisel Plane
Replacement blade for the Lie-Nielsen No. 97½ Small Chisel Plane. Comes with a 25° flat ground bevel.
1¾" wide x 3/16" thick
A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No.112 Large Scraping Plane
Ensure your Lie-Nielsen No. 112 Large Scraping Plane maintains its exceptional performance with this high-quality replacement blade. Designed to meet the rigorous demands of woodworking, this blade offers durability and precision for smooth, efficient scraping.
Key Features:
Premium Material: Crafted from A2 Tool Steel, cryogenically treated and double tempered, ensuring the blade holds a...
Spare Blade for Lie-Nielsen No.212 Small Scraping Plane
Replacement blade for the Lie-Nielsen No. 212 Small Scraping Plane. The blade is double tempered A2 Tool Steel, hardened to Rockwell 60-62. Their heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very...
Spare Blade for Lie-Nielsen No.85 Cabinet Maker's Scraping Plane
Replacement blade for the Lie-Nielsen No. 85 Cabinet Maker's Scraper. A2 Tool Steel hardened to Rockwell 60-62, cryogenically treated and double tempered. Their heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take...
Lie-Nielsen Screwdrivers with Cherry Handles
These Lie-Nielsen screwdrivers are made to fit specific screws on Lie Nielsen tools. They may be useful for other jobs as well. Modelled after gunsmith's screwdrivers with machined tips, they are correctly sized to fit the screw slots, giving you good power and control without slipping. The Chipbreaker and frog adjustment screwdriver are particularly useful.
The blades are hardened 416 Stainless...
Spare Blade for Lie-Nielsen Small Bronze Spokeshaves
Replacement blade for the Flat or Curved Sole Small Bronze Spokeshaves. Comes with a 25° flat ground bevel.
* 1.375" wide x .125" thick
* A2 cryogenically treated Tool Steel
Long Rod for Veritas Skew Block Plane
This optional 3 1/2" stainless-steel fence rod is 1 1/8" longer than the 2 3/8" rod supplied with the Veritas skew block plane to let you add a thicker fence extension (e.g., a tapered spacer for angled cuts) without restricting cutting width.
Made in Canada.
Long Rods for Veritas Skew Rabbet
Double guide rods and a special collet locking system prevent the fence from racking, and the large brass knobs allow fast and easy adjustments without tools. The fence can be positioned to allow a maximum rabbet width of 1½".
Prices include VAT