Sort By
Per Page
View
Grid
List
Robert Sorby ProEdge Knife Holder Small
The Robert Sorby ProEdge Small Knife Holder can be used for pocket knives, carving knives and blades up to 8" long.
Please note that you will already need to own a jig to use this (either the PEKJIGS or PEKJIGL).
Robert Sorby ProEdge Long Grind Jig
Helps you to create three different fingernail profiles.
Robert Sorby ProEdge Proset
Achieving the exact bevel angle on any fingernail or long grind gouge has never been easier than with the Robert Sorby Proset.
By placing the gouge into the clamp of the profile arm and then extending the gouge up-to the required stop and locking it into place will allow for precise and repeatable bevel angles to be obtained.
Robert Sorby ProEdge Skew Jig
The Skew Jig allows the turner to accurately and safely sharpen his skew chisels.
Robert Sorby ProEdge Trizact Belts
Perhaps the most popular in the range of belts. This robust material is designed to handle the demands of all steels. Not strictly 'grit sizes' these belts are built using brick and pyramid abrasive shaping.
The highest 3000 'grit' size will sharpen to two microns (the same sharpness as a disposable razor blade) and provide a factory finish on all steels.
Robert Sorby ProEdge Zirconium Belts
Designed for HSS tools, drill and router bits this material provides good value.
The 60 grit belt will tackle the most damaged surface. Use the 120 grit to provide a rewarding cutting edge and finish.
Robert Sorby Short Tool Platform with Arm
Increases access when tools are getting old and worn.
Robert Sorby Standard Gouge Jig
Allows easy sharpening of all standard ground woodworking gouges.
Robert Sorby Woodworkers' Square Guide
This simple to use jig has been designed as an upgrade to the current woodworking chisel jig (PESQ). This jig can be adjusted to ensure exact and repeatable 90 degree angles can be achieved every time. A stepped plate raises the tool to be sharpened away from the tool platform.
Ideal for sharpening chisels and plane irons.
Robert Sorby Woodworking Chisel Jig
Accurately ensures a straight cutting edge on any woodworking chisel.
Set of Norton Manmade Oilstones + Oil
Please note that these stones measure 8" (200mm) x 3" (75mm) x 1/2" (13mm) and are supplied in a plastic storage box.
These are Norton India oil stones (aluminium oxide) are great for imparting durable, smooth cutting edges and for close tolerances.
The set includes;
Coarse India - Use to sharpen dull edges quickly.
Medium India - Medium cutting rate man-made sharpening...
Slip Stones
Recommended for wood working, gunsmithing, tool & die work and all other jobs that require a smooth metal finish. Slip Stones are the ideal answer for sharpening and polishing hooks and blades.
These long-lasting, round edge Arkansas Slip Stones are ideal for precision sharpening and honing. This stone produces a fine, even finish on curved blades and is popular amongst carpenters, tool manufacturers...
Soft Arkansas Bench Stones
Prized by craftsmen worldwide, Arkansas Novaculite is the only known substance that can sharpen a blade and polish it as well. All of these Bench Stones are 100% natural Novaculite, cut to size and skillfully finished to ensure precise flatness.
Soft Arkansas is considered the coarsest of the Arkansas sharpening stones. This stone will provide the initial edge and first level of polishing and is...
Square Double Angle Files
The Square Double Angle Files offered by Classic Hand Tools are high-quality sharpening tools made from Arkansas Novaculite, a natural material prized for its ability to both sharpen and polish blades effectively. These files are designed to accommodate the various shapes and gauges of V-tools, making them ideal for detailed sharpening, finishing, and maintaining the edges of your tools.
Key Features:
Material:...
Stones for Carving Tools
Used to create the finest edge on precision tools, delicate instruments, and die work. RH Preyda Arkansas files hold their shape while creating the finest, most uniform finish.
These Carving Tool Forms are designed to accommodate the various shapes and gauges of V-tools. The dimensions and specifications of each stone will match tools ranging from ultra-flat to semi-circular and a variety of curves...
Surgical Black Arkansas Bench Stones
Prized by craftsmen worldwide, Arkansas Novaculite is the only known substance that can sharpen a blade and polish it as well. All of these Bench Stones are 100% natural Novaculite, cut to size and skillfully finished to ensure precise flatness.
The hardest and finest of the Arkansas sharpening stones. Prized by machinists, tool and die makers for its precision honing and polishing capabilities....
The Robert Sorby ProEdge Ultimate Sharpening System
The updated version of the ever popular Robert Sorby ProEdge sharpening system. In all honesty the machine has remained the same as nothing really needed to be updated!
Robert Sorby have however changed from using the old terms of 'Basic' and 'Deluxe or Plus'. Thankfully it has been simplified, and the Sorby machine comes in one edition which includes a single 120 grit aluminium...
Tormek Knife Angle Setter
Why KS-123 Knife Angle Setter?
Set the exact sharpening angle for any type of knife.
Easy to use - set the angle in three easy steps.
Sets an exact sharpening angle even for tapered blades.
Self-adjusting for the diameter of the grinding wheel.
Compatible with all Tormek knife jigs.
Works with the Tormek T-8, Tormek T-4 and older models.
What's Your Angle?
Our angle is always...
Translucent Arkansas Bench Stones
Prized by craftsmen worldwide, Arkansas Novaculite is the only known substance that can sharpen a blade and polish it as well. All of these Bench Stones are 100% natural Novaculite, cut to size and skillfully finished to ensure precise flatness.
The rarest of Arkansas sharpening stones. Translucent stones in their purest form are white. Translucent stones may contain shades of pink, yellow, and...
Tormek Adjustable Tool Rest
With the Tormek Adjustable Tool Rest you get an extended support surface from the Universal Support. It is ideal for sharpening turning scrapers and special tools for woodcarving, e.g. large scorps and inshaves. You can also use it for cabinet scrapers and hollowing tools.
It has a generous surface, 90 × 110mm, which permits a safe and steady positioning of the tool towards the stone.
The...
Tormek AngleMaster
The Tormek AngleMaster has two functions: you can use it to set the edge angle before sharpening or to measure the existing angle of a specific tool.
The edge angle can be set from 10° to 75°. The AngleMaster is designed to work on any grindstone diameter from 250 mm or 10" down to 150 mm or 6", so you can achieve an exact setting even as the stone wears.
Tormek Anti-Corrosion Concentrate (2 Pack)
The Tormek Anti-Corrosion Concentrate makes water non-corrosive. Always use with Tormek diamond wheels. It can also be used with grindstones.
Add 10ml concentrate to 250ml water (~4%). Scale for correct dilution. Mix Anti-Corrosion Concentrate and water before adding to water trough. If you want to save the mix overnight, remember to lower the water trough. Does not contain anti-freeze.
Each...
Tormek AWT-250 Advanced Water Trough
The Tormek Advanced Water Trough AWT-250 has an enlarged standard lip which ensures that your workbench stays free from water. It also includes an embedded magnet to collect steel particles and a removable water chute for long tools.
Magnet Cleans the Stone
The water trough incorporates a strong magnet, which attracts the steel particles ground from the tools being sharpened. This keeps your stone...
Tormek Axe Jig
The new AX-40 Axe Jig from Tormek.
Easy to use.
Precise and symmetrical sharpening.
Versatile - sharpens convex, flat or concave bevels.
Fits all types of axes.
Works with the Tormek T-8, Tormek T-4 and older models.
Convex, Flat or Concave Bevels
The AX-40 Axe Jig lets you sharpen any kind of axe to a convex, flat, or concave bevel. Each jaw of the jig has two stops that lets you...
Tormek Bench Grinder Kit
A package deal comprising the Tormek BGM-100, Tormek SVS-50 Multi-Jig, Tormek TTS-100 Turning Tool Setter and the Tormek SVD-186 Turning Tool Jig.
Tormek BGM-100
With the BGM-100 you can use Tormek jigs and setting devices on your bench grinder, giving you perfect control. The chosen shape and edge angle are precisely repeatable. The BGM-100 also allows the use of other Tormek woodturner's...
Tormek Bench Grinder Mounting Set
If you need to remove a lot of steel to create a desired shape on a new tool, this Tormek Bench Grinder Mounting Set BGM-100 enables you to use the Tormek woodturning jigs also on your bench grinder.
Take control of your profiles
No matter which grinding machine you use, the most difficult part in sharpening woodturning tools is to exactly replicate the shape and the edge angle.
With the BGM-100...
Tormek Centreing Knife Jig
With Tormek's patented KJ-45 Centreing Knife Jig, you'll get symmetrical bevels with the same angle on both sides of the knife, regardless of the thickness or geometry of the blade. Whether you're sharpening a regular kitchen knife or a thicker, tapered hunting knife, you'll get the same results on both bevels of the knife without needing to reset the jig.
The KJ-45 Centreing Knife...
Tormek CW-220 Composite Honing Wheel
The Tormek Composite Honing Wheel has integrated polish to remove the burr and is easy to use. This wheel fits Tormek T-8, Tormek T-7 and Tormek 2000.
The Composite Honing Wheel is suitable to use in clean environments since there's no need to add honing compound.
Tip when honing Moisten the composite honing wheel with some water for smoother honing. Use a sponge or cloth.
Tormek DC-200 Diamond Wheel Coarse 360G
The Tormek Diamond Wheel Coarse has a grit size of 360 for fast steel removal when shaping and a rapid repair of a dull or damaged edge.
You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-4 Original and Tormek T-4 Bushcraft.
Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate. Always use the concentrate in the water when sharpening...
Tormek DC-250 Diamond Wheel Coarse 360G
The Tormek Diamond Wheel Coarse has a grit size of 360 for fast steel removal when shaping and a rapid repair of a dull or damaged edge.
You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-8, Tormek T-7 and previous models with a 250mm stone diameter.
Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate. Always use the concentrate...
Tormek DE-200 Diamond Wheel Extra Fine 1200G
The Tormek Diamond Wheel Extra Fine with a grit size of 1200 leaves an extra fine finish and is especially suitable for carving tools and knives when the need for steel removal is minimal.
You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-4 Original and Tormek T-4 Bushcraft.
Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate....
Tormek DE-250 Diamond Wheel Extra Fine 1200G
The Tormek Diamond Wheel Extra Fine with a grit size of 1200 leaves an extra fine finish and is especially suitable for carving tools and knives when the need for steel removal is minimal.
You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-8, Tormek T-7 and previous models with a 250mm stone diameter.
Included with every diamond wheel is a bottle of Tormek...
Tormek DF-200 Diamond Wheel Fine 600G
The Tormek Diamond Wheel Fine with a grit size of 600 is the ultimate all round wheel combining efficient steel removal with smooth surface finish which makes it the perfect versatile wheel.
You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-4 Original and Tormek T-4 Bushcraft.
Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate....
Tormek DF-250 Diamond Wheel Fine 600G
The Tormek Diamond Wheel Fine with a grit size of 600 is the ultimate all round wheel combining efficient steel removal with smooth surface finish which makes it the perfect versatile wheel.
You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-8, Tormek T-7 and previous models with a 250mm stone diameter.
Included with every diamond wheel is a bottle of Tormek...
Tormek Diamond Stone Truing Tool
If your grindstone has become uneven, it is easily fixed with the Tormek Diamond Truing and Dressing Tool TT-50. It will make your stone perfectly round and flat again.
Easy feeding across the stone
You conveniently feed the diamond cutter across the stone by alternately turning the two knobs with both your hands. Thanks to the controlled feed, you get an even and flat stone surface with no ridges.
Controlled...
Tormek Drill Bit Sharpener
With the Tormek Drill Bits Sharpening Attachment you can now sharpen your drill bits (3-22mm) with the highest precision. The optimal point can be set according to each drilling requirement, which depends upon the drill size and material. You can completely restore worn drills as well as broken drills to a perfect shape.
Tormek Gouge Jig
With the Tormek gouge jig SVD-186 R you can easily sharpen your fingernail shaped woodturning gouges to a razor sharpness. The high level of control enables you to exactly replicate your chosen profile.
With this gouge sharpening jig you can also sharpen woodcarving tools with complex shapes such as curved or bent carving gouges and V-tools.
Redesigned version 2020
New locking screw to lock...
Tormek Hand Tool Kit
This Tormek Hand Tool kit includes all the jigs you need for sharpening your knives, scissors, draw knives, small knives, flexible knives and axes as well as short chisel and carving tools. The perfect kit to sharpen all your hand tools.
The jigs are packed in a TC-800 Tormek Case with the included HTK-00 Storage Tray. The Tormek Case keeps your jigs and accessories organized and is easy to carry...
Tormek Handbook
The Tormek handbook is included with each machine. It gives you the basics of sharpening and different techniques as well as user instructions and valuable tips for each jig and how to sharpen specific tools.
More than 600 detailed line drawings show, step by step, how best to sharpen most type of edge tools with the unique Tormek method. The updated design with wire-o-binding and plastic cover...
Tormek Honing Compound
The honing compound is used together with the Tormek Leather Honing Wheels. The unique qualities of the leather together with the honing compound will effectively remove the burr created from sharpening, without damaging the edge. At the same time, it will also polish the bevel to the finest finish.
The honing compound contains a combination of micro abrasives and polishing components (average...
Tormek HTK-00 Storage Tray
The Tormek HTK-00 Storage Tray stores all the jigs included with their Hand Tool Kit. The storage tray has an improved design and is customized to fit in the Tormek Case TC-800 and the Sharpening Station TS-740.
The storage tray is made of EPP, a permanent construction material that is durable and ready for many years of holding jigs in their places.
Designed to hold:
SVM-45 Knife Jig
SVM-140...
Tormek Knife Profile Jig
The Tormek Knife Profile Jig SVP-80 sharpens all makes and shapes of moulding knifes with 24, 30 or 36 mm distance between the hole-centres.
Since you sharpen the flat back surface of the knife, you can use the jig regardless of the profile. Max width 100 mm. Also for profiled paint removal blades.
Tormek LA-120 Jig Shaft
Replacement shaft for the LA-120 Profiled Honing Wheel
Tormek LA-124 Set of Optional Narrow Discs
For use with the Tormek Profiled Leather Honing Wheel LA-120. Includes two discs, one with a 2mm (3/32") radius and one with a 45° tip.
These smaller disc profiles permit the honing of small carving tools with very narrow profiles.
Tormek LA-220 Leather Honing Wheel
Gently removes the burr which develops during grinding and polishes the bevel. Fits Tormek T-8, Tormek T-7 and Tormek 2000.
It is used together with Tormek Honing Compound PA-70. To get the highest possible sharpness on your edge tool, you finish the sharpening process by honing your tool on the Leather Honing Wheel.
The leather on the Leather Honing Wheel is provided by the tannery Tärnsjö...
Tormek Leather Profiled Honing Wheel
With the profiled Tormek leather honing wheels LA-120 you can hone and polish the inside of turning gouges, carving gouges and V-tools. Fits all Tormek models.
You mount the extra wheels on the outer side of the standard honing wheel.
LA-120 is delivered with two standard discs. The first has a radius of 3mm (1/8") for gouges and the second has a 60° tip for v-tools.
It is used...
Tormek Machine Cover
The Tormek machine cover protects your machine from shavings and wood dust.
100% Cotton.
Breathable.
Fits all Tormek models.
Tormek MSK-200 Stainless Steel Shaft for T3/T4
Tormek Stainless steel main shaft with Ezylock nut in composite. The EzyLock ensures that the grindstone is held securely with no danger of unwinding. Unique design requires no tools to mount or loosen the grindstone.
With the Tormek EzyLock, which is both a nut and a washer, you need no tools for mounting and dismounting the stone. The special pitch on the left hand thread causes the rotation...
![Lie-Nielsen Toolworks No.5 1/2 Jack Plane [Preowned, SOLD]](/images/products/thumbs/3729_9173.jpg "Lie-Nielsen Toolworks No.5 1/2 Jack Plane [Preowned, SOLD]")
![Lie-Nielsen Toolworks No.5 1/2 Jack Plane [Preowned, SOLD]](/images/products/thumbs/3729_9168.jpg "Lie-Nielsen Toolworks No.5 1/2 Jack Plane [Preowned, SOLD]")
![Woodpeckers - Setup Blocks (Metric) - 10pc Set [Preowned, SOLD]](/images/products/thumbs/3857_9770.jpg "Woodpeckers - Setup Blocks (Metric) - 10pc Set [Preowned, SOLD]")
![Woodpeckers - Setup Blocks (Metric) - 10pc Set [Preowned, SOLD]](/images/products/thumbs/3857_9769.jpg "Woodpeckers - Setup Blocks (Metric) - 10pc Set [Preowned, SOLD]")
![Lie-Nielsen No.5 1/2 - Jack plane (with extra Frog) [Preowned]](/images/products/thumbs/4005_10437.jpg "Lie-Nielsen No.5 1/2 - Jack plane (with extra Frog) [Preowned]")
![Lie-Nielsen No.5 1/2 - Jack plane (with extra Frog) [Preowned]](/images/products/thumbs/4005_10436.jpg "Lie-Nielsen No.5 1/2 - Jack plane (with extra Frog) [Preowned]")
![Lie-Nielsen No.97 1/2 - Small Chisel Plane [Preowned, As New]](/images/products/thumbs/4004_10428.jpg "Lie-Nielsen No.97 1/2 - Small Chisel Plane [Preowned, As New]")
![Lie-Nielsen No.97 1/2 - Small Chisel Plane [Preowned, As New]](/images/products/thumbs/4004_10430.jpg "Lie-Nielsen No.97 1/2 - Small Chisel Plane [Preowned, As New]")
