Sort By
Per Page
View
Grid
List
Tite-Mark Fixed Width Mortice Blade Set
Tite-Mark fixed width mortice blades - set of 4 with hex key.
1/2", 3/8", 5/16" and 1/4" for Tite-Mark Standard and Long Marking Gauges
Gyokucho Blade for Ryoba 300mm (616 & 664)
Replacement for the Gyokucho #661 and #664 saws
Flexcut Beginners Palm Set FR310
This very popular Flexcut set is great for those just getting started or those with more experience who like to carve smaller sized projects. The handle fits comfortably in the palm, allowing for good control close to your work. The five profiles can perform a variety of tasks and carve moderate detail.
Palm Tools included: FR308 #2 x 5/16", FR305 #3 x 3/8", FR306 #6 x 5/16", FR309...
Henry Taylor Woodcarving Punch - 4 Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Spare Blade for Lie-Nielsen Boggs Spokeshaves
Replacement blade for the Curved or Flat Sole Boggs Spokeshaves.
Comes with a 25° flat ground bevel.
* 2" wide x 1/8" thick
* A2 cryogenically treated Tool Steel
.png "Last Ones!")
Saburrtooth 6mm Taper - 1/4'' x 1 3/8'' X Coarse
15% discount from price shown.
Furniture Mouldings (1574 - 1820)
By E. J. Warne,
Originally published in 1923, this book contains 140 plates of full-size English furniture mouldings from the late 16th to early 19th century. There are over 500 detailed mouldings of bedsteads, cabinets, a bureau, shelves, a secretaire, clothes presses, wardrobes, chests, chairs, lace boxes, chests of drawers, stools, settees, seats, tables, sideboards, a dresser, knife cases, mirror...
Oak-Framed Buildings
By Rupert Newman,
The author originally trained as a naval architect and shipwright moved on to oak timber framed construction for houses.
Full colour photographs show projects both complete and under construction. Indented for aspiring self-builders as well as established carpenters and builders. Structural details and three-dimensional drawings are included.
Chapters comprise:
Past...
Pfeil Sculptor's Hatchet
The Pfeil Sculptor's Hatchet is a small hatchet which is very handy and easy to guide. With leather edge protector.
Overall length 280mm (about 11")
Weight 550gms with cutting edge of 80mm.
Auriou Standard Stonecarving Gouges Series 7
Auriou stone carving chisels from this standard range have straight octagonal bodies. These are perfect for working soft stone and marble.
Flat and rondelle chisels are used for smoothing out the texture left by the tooth chisel and prepares the stone for finishing. Any stone bruises left by the point or tooth chisels can be removed with a flat chisel or a riffler file.
Bad Axe Frame Saw and Kerfing Plane Hardware Kit (no wood)
What's included.....
30 1/2" Saw Plate and 10" Kerfing Plane Plate. Blue Tempered 1095 Spring Steel. Hammer-set and sharpened by hand.
Two brackets (with kerf pre-cut), one of which is tapped for the 3/8" eye bolt.
3" x 3/8" eyebolt with jam nut.
Striker Plate with fastening screws.
Two U-bolts to secure plate to brackets.
''All you have to do is cut and form the wooden components.''
Benchcrafted Mag-Blok Cherry
We've had our eye on these Mag-Bloks by Benchcrafted for years and years, but sadly they'd previously had an agent in the UK. Thankfully, things have changed and we can import the Mag-Bloks alongside their wonderful bench hardware.
The Mag-Bloks are equally fantastic in both the home and the workshop. We use them here in the shop to display bench chisels, and a couple of us have them in...
Brusso Jig TJ-103
For Brusso Stop Hinges JB103 and Butt Hinges CB303 (with or without ball finials).
Brusso Jig TJ-L37
For Brusso knife hinges L-37 and L-39.
Carving the Traditional Greenman with Mary May
Variations of the Greenman motif are found in many cultures around the world. Often related to natural vegetative deities, the Greenman is a symbol of rebirth and the cycle of growth each spring. Mary May uses the Greenman project to demonstrate a variety of carving techniques, with special emphasis on carving facial features.
Mary May is a professional woodcarver in Charleston, SC, who specializes...
Flexcut 5/16'' (8mm) Scorp KN23
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available.
Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself. 3 additional profiles available.
Gyokucho Blade for Compact Jushi 180mm Rip (295)
Replacement for the Gyokucho #295 saw
Hock 1 1/4'' Stab Knife
The Stab Knife is used for taking more vertical cuts where space is limited for a conventional whittling stroke. This knife can also be referred to as a Skew Knife.
The length listed is an approximate blade length.
Handles are made from Jatoba with nothing more than an oil finish.
Hock High Carbon 3 1/2'' Paring Knife Kit
Ron Hock kit to create Paring Knife with a 3½" blade which is 1/8" thick - sold without handles and include 3 steel pins.
General Info on the Hock Tools Knife Kits - The top quality, high carbon tool steel in these blades makes a superior cutting tool in the kitchen. While stainless cutlery can be handy nothing cuts better in the kitchen than high-carbon tool steel. This is O1...
Pax 10' Guitar Saw
Also sometimes known as a Fret Saw, the Pax Guitar Saw is ideal for cutting the frets on a guitar. It has two holes in the blade so that a depth measuring gauge can be mounted (not supplied with the saw).
The saw has a brightly polished brass back and a Walnut handle. Kerf: 0.022" approx. 16tpi as standard.
Pax Razor Saw
The Pax Razor Saw has a fine toothed blade with 40tpi and no set on the teeth so this gives a smooth finish to your work. it is suitable for precision work and very small areas of wood. As the teeth are so fine, it is perfect for those delicate areas, which need the best finish.
The saw has a brightly polished brass back and a Rosewood handle.
Blade length 6″, 42tpi.
Popular with model...
Replacement PM-V11 Blade for the Veritas Shop Knife
Made of PM-V11 tool steel , this replacement blade for the Veritas Shop Knife is 3/32" thick and about 3/8" wide with a 55° spear-point tip. Ground to a keen edge at a 25° bevel angle.
Robert Sorby Full Round Scraper Cutter
The Robert Sorby Full Round Scraper Cutter is the perfect circular cutter for all general and large purpose hollow form turning. An incredible all rounder this cutter, like all full round cutters, provides the opportunity to rotate a couple of times to provide a clean sharp edge before it requires sharpening.
The perfect accompaniment for the Robert Sorby Hollowmaster the tool it was designed for...
Saburrtooth 1/4'' Cylinder - 1/4'' x 1 3/4''
Head Diameter: 1/4"
Head Length: 1¾"
Saburrtooth 1/4'' Dove Tail 3/4'' x 1 1/4''
15% discount from price shown.
Saburrtooth 1/4'' Taper 3/4'' x 1 1/4''
15% discount from price shown.
Saburrtooth 1/8' Cylinder - 1/2' x 1/2' - (Radius End)
15% discount from price shown.
Side Handle for the Lie-Nielsen No. 62 Low Angle Jack Plane
This powder-coated Aluminum 'Hot Dog' attaches to the side of the No. 62 Low Angle Jack Plane to make shooting more comfortable.
Sjobergs Nordic 1450 Bench & Storage Module 0042
The sturdy underframe of this Sjobergs Nordic Plus 1450 bench is made from Scandinavian pine and with the hard Nordic birch top the bench is built to last a lifetime of normal use. A double row of 19mm (3/4") dog holes run from each of the four vice locations, giving an endless opportunity to clamp your work. There are four mounting locations for the vices allowing you to configure the vices to...
Veritas Miniature Right-Hand Shooting Plane
Only 5 5/16" long with a 3/4" wide blade, this is a fully functional 1:3-scale version of the veritas right-hand shooting plane. A superb tool for precisely trimming smaller stock to length, it is useful for anything from picture framing to kumiko and similarly fine work.
The body is made of stainless steel, machined and ground with a sole and running surface that are accurately flat and...
Gyokucho Fugaku Folding Dozuki 240mmm Rip
Full Name : Gyokucho Razorsaw Fugaka Folding Dozuki.
Blade Length : 240mm.
Overall Length : 540mm open / 290mm closed.
Max Cutting Depth : 45mm.
Teeth Pitch / TPI : 1.5mm / 16.9
Blade Thickness : 0.3mm.
Teeth Pattern : Rip with crosscut.
Gyokucho Product Number : 111.
Weight : 320g
Replacement Blade : S111
Pretty much the same as the standard range of saws, but these fold...
Kutzall 1/4'' Ball Nose Burr - 1/4'' x 1-3/8''
Kutzall burrs are the perfect companions for your rotary carving tools.Made in the USA, Kutzall burrs provide a great combination of material removal and surface quality. Efficient with or against the grain, these burrs have a long wear life.Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.NOTE: These burrs should only be used...
Proxxon Cordless Drill Set
Complete with lithium-ion battery, charger and case.
Robert Sorby Curved Scraper
The curved end profileof thie Robert Sorby Scraper makes this excellent for creating, smoothing and blending curved surfaces in bowl and spindle work, eg round bottomed boxes. This new tool is able to take an agressive cut, whilst retaining the butterfly sensitivity for the refining cuts.
3/4" Curved Scraper - 16" with handle
Robert Sorby Standard Parting Tools
Robert Sorby standard parting tools are used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. The 1/8" (3mm) tool reduces the amount of waste, vital if the timber is an expensive, exotic one.
It also makes for a fine detailing tool, e.g. beads and fillets.
Veritas Small Scraping Plane
The Veritas Small Scraping Plane is a great tool for the final smoothing of small, flat surfaces, even highly figured timber, or small areas of difficult grain within a larger surface.
The scraping plane comes into action after the surface has been prepared as well as possible using a finely tuned smoothing plane. What the scraping plane does is to replace the need for sanding prior to applying...
Gyokucho Fugaku Folding Kataba Super Hard 240mm
Full Name : Gyokucho Razorsaw Fugaka Folding Kataba.
Blade Length : 240mm.
Overall Length : 540mm open / 290mm closed.
Max Cutting Depth : N/A.
Teeth Pitch / TPI : 1.9mm / 13.4
Blade Thickness : 0.6mm.
Teeth Pattern : Crosscut.
Gyokucho Product Number : 112.
Weight : 300g
Replacement Blade : S112
Pretty much the same as the standard range of saws, but these fold which means...
Clifton No.5 Jack Plane
A Clifton No.5 Jack Plane. The smaller of the two jack planes from Clifton. All Clifton planes have a heavy casting, so if you do not need the extra width of the 5 1/2 this could be the jack plane for you.
Bedrock design frog allows for maximum contact between frog and plane body, and gives you easier, more precise adjustment of the mouth.
Blade is cryogenically treated O1 steel, heated to...
Crown Tools Bowl Gouge
A bowl gouge is the perfect tool for roughing down bowl and platter blanks as well as shaping and hollowing to a good finish.
These tools are made by milling a U shaped flute in a round bar. The width (a little confusingly) is the width of the flute, rather than the diameter of the bar.
The larger gouges are ideal for roughing down blanks and reaching into large bowls. The 1/4" (6mm) is...
Flexcut Double Sided Paddle Strop
Flexcut Double Sided Paddle Strop has an 10" by 3" stroppping surface on both sides. The rough leather surface is used in conjunction with the Flexcut Polishing Compound (included), the fine side is a smooth leather surface for final finishing. Ideal for larger tools / blades.
Gyokucho Blade for Compact Ryoba 180mm (291)
Replacement for the Gyokucho #291 saw
Saburrtooth 6mm Ball Nose - 1/4'' x 1''
15% discount from price shown.
Auriou Traditional Stonecarving Gouges Series 6
The Auriou Traditional Stonecarving Gouges Series 6 are meticulously crafted for exceptional performance in soft stone and marble carving. Available in a range of sizes from 8mm to 25mm, these gouges offer precise control and durability for various sculpting tasks. The traditional "fat" hexagonal barrel handle ensures comfort during extended use.
Sizes Available: 8mm, 10mm, 12mm, 16mm,...
Clifton No. 410 Shoulder Plane
The Clifton 410 Shoulder Rebate Plane fills the need for a narrow light and accurate shoulder plane. The cutting iron fits smoothly onto the machined pads in the body and can be finely adjusted by means of a screw..
Cutter: 11/16" (18mm) wide
Length of plane: 5.1/2" (138mm)
Approximate weight: 1.1/4"lbs (0.58kg)
Made in Sheffield, UK
Flexcut Hook Hone PW18
The Flexcut Hook Hone is used to sharpen the inside edge of any hook knife. This sharpening tool used abrasive paper as a more aggressive solution than stropping to remove nicks and scratches from the cutting edge.
Includes 400 and 600-grit abrasive paper and an instructional guide.
Pfeil Chip Carving Knife - Kerb 5
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 5 also known as Schnitzhaken.
For one-handed carving on small objects, with this specialist shape you can reach deepened areas from above. Not made specifically for chip carving.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 55mm
Thorace Dead Blow Nylon Hammer
The Thorace Dead Blow Nylon Hammer has a cavity inside the head which is partially filled with steel shot which adds to the weight, prevents rebound and delivers ‘dead’ blows of maximum force.
Faces are designed to wear and to be replaced by hand.
All faces are one piece moulded.
No metal pegs or inserts to damage the workpiece when worn.
Serrations in the metal head prevent...
Bessey GH All Steel Lever Clamps
* Greater reserves of power‚ thanks to optimised rail profile‚ for even clamping force build-up‚ especially under maximum utilisation of the clamping range
* Non-slip trigger release
* Quick - up to 5 x faster than regular clamps
* Secure - vibration resistant
* Strong - clamping force up to 8‚500 N
GH20 Opening 200mm Depth 100mm