Sort By
Per Page
View
Grid
List
Muller French-Style Sculptors Adze
Again, these adzes are from Leonhard Muller's Carpenter's Hatchets range but they are based on the traditional French design where the head gradually flares from the poll. 3 sweep widths to chose from and all come with straight hickory handles.
Straight 450mm hickory handles (about 18")
Choice of 65mm, 60mm or 56mm wide medium sweep cutting edge.
.png "Last Ones!")
PEC Tools 9' Solid Square
The PEC Tools 9" Solid Square has a 9" long blade. The length of blade is measured from inner edge of the beam to the end of the blade.
The solid squares have true right angles; both inside and out. (Squareness within 0.0008").
They are made from high quality harden tool steel and the beams and blades are precision ground and hardened.
Made in the USA
Robert Sorby Diamond Sharpening File (40 micron)
The Robert Sorby Diamond Sharpening File is the ideal handy accessory for sharpening replaceable tool tips.
It can also be used on knives, scissors, even tungsten carbide router bits.
For maximum life lubricate with water during use.
Robert Sorby Micro Woodturning Tool Set
Ideal for small projects such as model making or dolls house furniture.
A 5 piece set comprising 1/4" Spindle Gouge, 1/8" Spindle Gouge, 1/4" Round Nose Scraper, 1/4" Skew Chisel and 1/16" Parting Tool.
The tools have an overall length of 10".
Saburrtooth 1/8'' Concave - 3/8'' x 1/2''
15% discount from price shown.
Saburrtooth 2'' (50mm) Round (Donut) Faced Shaping Wheel with Holes
15% discount from price shown.
Shinwa 45° Mitre Square with 90° Guide - Metric
Stainless steel mitre square.
Measurements on both sides
Angular accuracy 45°, 90° & 135°: 0.2 mm or less per 100 mm
Base length: 115mm
Spare Blade for Lie-Nielsen No.212 Small Scraping Plane
Replacement blade for the Lie-Nielsen No. 212 Small Scraping Plane. The blade is double tempered A2 Tool Steel, hardened to Rockwell 60-62. Their heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very...
Sterling Tool Works Roubo Curves Series II - Detail Curve
Roubo Curves® are metal french curves on "steroids". Sterling's original set of curves were introduced in August 2015 providing artisans a large scale metal French curve set made from 304 Stainless Steel. In November 2017 they added "Series II" to the Roubo Curve line with two new appealing curve profiles.
The "Detail Curve" is just over 12" long and has many intricate curves to detail your projects...
The Difference Makers
by Marc Adams
Thanks to the internet, you can see a lot of interesting work with ease. But it’s easy to forget that the vast majority of the images on your screen are of pieces that are derivative, merely acceptable in their craftsmanship and were made by people at the beginning of their journey.
When you encounter true greatness it is shocking, inspiring and a bit humbling. The hair on...
Veritas Gents Saw - Rip Cut
Sharing the same, advanced materials as the Veritas dovetail and carcass saws, these Gent’s saws have 200mm long high-carbon steel blades just 0.4mm thick with 0.08mm of teeth set per side.
The 20tpi ripsaw has teeth with a 14" rake angle and a 60° included angle.
Depth of cut is 41mm. For strength and rigidity, the glass and stainless steel-filled polymer spine is moulded over...
Veritas Miniature Cabinetmaker's Trimming Plane
This fully functional 1:3-scale version of the Veritas cabinetmaker's trimming plane is a useful tool for reaching places a regular-size plane or chisel just won’t fit. Only 2 3/16'' (55mm) long, 5/8'' (16mm) wide and less than 1'' (25mm) in height, it excels at making precise paring cuts in tight spots, such as a box interior.
The 25° bevel blade and 15°...
Veritas Small Crosscut Saw
Used for cutting across or perpendicular to the grain, the 16 tpi crosscut saw blade has teeth filed with alternating bevel angles so it severs rather than tears wood fibers; it tracks better and leaves a smoother finish than a rip-cut blade. The teeth are filed with 15° rake and bevel angles and have 0.003" of set per side.
Famag Bormax 2.0 Metric Forstner Bit 6pcs Set
FAMAG 6pcs Bormax 2.0 Forstner Bit set in wooden case Ø 12, 13, 16, 18, 20, 22 mm.
Alloyed tool steel, RPM- 900 - 3200 rpm.
Overall height from tip to tip 90mm (57mm working depth).
Flexcut 3' Draw Knife KN25
This handy little draw knife by Flexcut was developed for fan carving but works great for skinning small areas of bark and roughing-off corners.
Made in the USA by Flexcut.
Gyokucho Fugaku Folding Dozuki 240mmm Rip
Full Name : Gyokucho Razorsaw Fugaka Folding Dozuki.
Blade Length : 240mm.
Overall Length : 540mm open / 290mm closed.
Max Cutting Depth : 45mm.
Teeth Pitch / TPI : 1.5mm / 16.9
Blade Thickness : 0.3mm.
Teeth Pattern : Rip with crosscut.
Gyokucho Product Number : 111.
Weight : 320g
Replacement Blade : S111
Pretty much the same as the standard range of saws, but these fold...
Henry Taylor Negative Rake Cove Tool
The Henry Taylor negative rake cove tool was designed to be used with The Decorating Elf but can also be used as an individual tool. When using with the Decorating Elf allows you to make coves.
Ideal for end grain work and spindle work.
Made with a high speed steel blade.
Veritas Cabinetmakers Trimming Plane
Commonly called a chisel plane, this 165mm long by 44mm wide plane has an exposed full width blade that lets you work up to adjacent surfaces. It excels at making paring cuts in places where a chisel would be awkward or impossible to use, making short work of cleaning up corners and joints inside carcasses. Because the blade can be set level with the sole, you can also trim plugs or small inlays...
Flexcut Whittler's Kit KN300
The Flexcut Whittler's Kit is a 2 piece knife set with Sharpening Compound to keep your knife blade sharp.
Knives included in the set are
KN13 Detail Knife
KN27 Mini Detail Knife
Glenn Lucas 5/8'' Bar Bowl Gouge
The Glenn Lucas 5/8'' Bar Bowl Gouge with 16'' handle.
This tool is great for the rough shaping of wet or dry bowls as well as refining work.
The gouge features a secondary bevel on the heel to give the tool some clearance when going around tight corners making concave curves or coves.
Gyokucho Blade for Compact Ryoba 180mm (291)
Replacement for the Gyokucho #291 saw
Leonhard Muller Brush-Hook (Billhook)
Leather wrapped handle. Rounded tip.
430mm overall (14")
260mm cutting edge (10")
Saburrtooth 6mm Ball Nose - 1/4'' x 1''
15% discount from price shown.
Shapton Lapping System
The Shapton Lapping System - also known as ''Naoru''.
A cast iron lapping plate 250 x 101 x 28mm in a geometrical pattern, ideal for flattening waterstones. For more information on how to use the system please look here.
Supplied with a bottle of coarse, and a bottle of medium lapping powder. More available separately.
Pfeil Chip Carving Knife - Kerb 5
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 5 also known as Schnitzhaken.
For one-handed carving on small objects, with this specialist shape you can reach deepened areas from above. Not made specifically for chip carving.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 55mm
Thorace Dead Blow Nylon Hammer
The Thorace Dead Blow Nylon Hammer has a cavity inside the head which is partially filled with steel shot which adds to the weight, prevents rebound and delivers ‘dead’ blows of maximum force.
Faces are designed to wear and to be replaced by hand.
All faces are one piece moulded.
No metal pegs or inserts to damage the workpiece when worn.
Serrations in the metal head prevent...
Hamlet Big / Little Brother Edge Protector
1x replacement edge protector that fits the Hamlet Big and Little Brother Hollowing Tool.
Square End Scrapers
The Square End Scrapers available from Classic Hand Tools are highly versatile tools designed primarily for finishing convex and flat-bottomed forms in woodturning. These scrapers are particularly useful for achieving smooth, clean surfaces on your projects. The square end can also be modified to specific shapes, such as a diamond point, to suit different tasks.
Key Features:
Versatility:...
Pfeil Chip Carving Knife - Kerb 8
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 8 also known as Stecher Gross.
With this knife you can cut into the wood from the top or the side to create a straight line, you are using the whole width of the blade.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 55mm
Gyokucho Blade for Kataba Proton Power Saw 240mm (400 & 400T)
Replacement for the Gyokucho #400 and 400T saws
Pfeil Medium Sized Tools - Spoon Gouges
Pfeil Medium Sized Tools for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
The Pfeil Medium Sized Spoon Gouges come in 2 options:
D5A Series 5 - 8mm width.
D8A Series 8 - 7mm width.
Sokosarai Japanese Chisel
Used for scraping and levelling the bottom of mortices.
Hock Scratch Stock
Ron Hock Scratch Stocks are made from tough, wear-resistant bamboo plywood. Two spring steel blades are included, one of which has a quirk-bead shape cut into it, to get you started using your Scratch Stock with no more than final honing. Other shapes are up to your imagination and are cut into the blades with files and slipstones.
The body measures 3/4" x 1-1/2" x 4-3/4", the blue-tempered...
Veritas Combination Plane Box
This storage box provides a place to keep the assembled plane, the second pair of fence rods and up to two of the blade boxes. Slots in the sides of the box base act as rests for the fence rods, holding the plane upright. The top of the box fits into channels in the box base, locking the plane in position as well as securing other contents.
Made in Canada from Baltic birch plywood, the box is...
Saburrtooth 6mm Flame - 3/8'' x 3/4'' Fine
15% discount from price shown.
Spare Blade for Lie-Nielsen Boggs Spokeshaves
Replacement blade for the Curved or Flat Sole Boggs Spokeshaves.
Comes with a 25° flat ground bevel.
* 2" wide x 1/8" thick
* A2 cryogenically treated Tool Steel
Saburrtooth 6mm Taper - 1/4'' x 1 3/8'' X Coarse
15% discount from price shown.
Henry Taylor Woodcarving Punch - Diamond Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Pfeil Sculptor's Hatchet
The Pfeil Sculptor's Hatchet is a small hatchet which is very handy and easy to guide. With leather edge protector.
Overall length 280mm (about 11")
Weight 550gms with cutting edge of 80mm.
Tormek LA-220 Leather Honing Wheel
Gently removes the burr which develops during grinding and polishes the bevel. Fits Tormek T-8, Tormek T-7 and Tormek 2000.
It is used together with Tormek Honing Compound PA-70. To get the highest possible sharpness on your edge tool, you finish the sharpening process by honing your tool on the Leather Honing Wheel.
The leather on the Leather Honing Wheel is provided by the tannery Tärnsjö...
Tormek SJ-250 Japanese Waterstone
The Tormek Japanese Waterstone 4000 grit delivers a mirror finish with hardly any visible marks. Since the stone is made to create the finest surface, it has a limited steel removal capacity and cannot be used for shaping* a tool.
This waterstone excels at sharpening hand tools like carving tools, knives, scissors, plane irons and wood chisels where a minimum of steel removal is needed and a superior...
Arbortech Power Carving Unit Sanding Discs
Enhance your woodcarving projects with the Arbortech Power Carving Unit Sanding Discs. Designed for optimal performance with the Arbortech Power Carving Unit, these 100mm diameter discs feature a convenient hook and loop backing, allowing for quick and easy abrasive changes. Available in various grits, you can choose from single packs of 8 discs or a mixed pack of 12 (3 of each grit: 60, 120, 180,...
Auriou Standard Stonecarving Chisels with Square Teeth
The Auriou Standard Stonecarving Chisels with Square Teeth are designed to refine shapes after using a point chisel. Ideal for soft stone and marble, these chisels help to remove peaks and valleys, leaving a smoother finish. Available in sizes ranging from 15mm to 30mm, each chisel offers precise control for detailed stonework.
Sizes Available: 15mm, 20mm, 25mm, 30mm
Purpose: Ideal for refining...
Auriou Standard Stonecarving Quirk Chisels
These tools have a special function. The shape of the blade is similar to that of a straight chisel but these chisels have been strengthened where the blade joins the shank, (they have a lozenge shape), so that you can work square on to the stone.
Connells Leather Tool Holdall
The Connell Tool Holdall is ideal for storing a variety of tools. Made from soft moss backed leather for durability.
Guaranteed against faulty workmanship and materials.
Dimensions - 18'' x 7'' x 7''.
Flexcut Spoon Carvin' Jack 2.0 JKN296
Flexcut’s Spoon Carvin’ Jack® 2.0 makes it easy and convenient to handcraft spoons from every kind of wood stock. The Spoon Carvin’ Jack 2.0 has been redesigned for greater functionality. It now features four profiles — a Variable Radius (9.5mm to 12.7mm) Hook Knife, 19mm Hook Knife, Gouge Scorp, and a Pelican Knife. Like all of the knives in the Carvin’ Jack series,...
Henry Taylor No.11 Straight Gouge - 1' (25mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
James Barry Credit Card Stone Set
Professional double sided credit card stones. Unique 1.6mm thickness means no flexing as in cheaper thinner products.
Set includes the following stones:
180/300 grit - Great for turning tools. Perfect for sharpening roughing gouges, and repairing damaged edges. Can create a durable edge on roughing gouges in seconds and will give a tough lasting burr on a scraper. Comes complete with red storage...