Sort By
Per Page
View
Grid
List
Veritas Miniature Right-Hand Shooting Plane
Only 5 5/16" long with a 3/4" wide blade, this is a fully functional 1:3-scale version of the veritas right-hand shooting plane. A superb tool for precisely trimming smaller stock to length, it is useful for anything from picture framing to kumiko and similarly fine work.
The body is made of stainless steel, machined and ground with a sole and running surface that are accurately flat and...
Veritas Miniature Right-Hand Shooting Plane & Board
A perfect match of minature tools.
Veritas Miniature Right-Hand Shooting Plane
Only 5 5/16" long with a 3/4" wide blade, this is a fully functional 1:3-scale version of the veritas right-hand shooting plane. A superb tool for precisely trimming smaller stock to length, it is useful for anything from picture framing to kumiko and similarly fine work.
The body is made of stainless...
Veritas Miniature Shooting Board
Modelled after the full-size shooting board, this 1:3 scale miniature adaptation is designed for use with the Veritas Miniature Shooting Plane, adding a measure of control to precise trimming tasks.
Made of 11/16" thick Baltic birch plywood, it has a 3/8" tall cleat on the bottom for solid registration against the edge of a workbench. The 8" long extruded aluminum track is sized for...
Veritas Miniature Wonder Dog
This 1:3 scale version of the Veritas Wonder Dog is especially useful for securing small work horizontally. Sized to fit in a 17/64'' dog hole, it has a 1 1/2'' long stainless-steel post with an O-ring for slightly elevated clamping.
At 3/4'' wide and 1/4'' high, the brass head will not mark tools or workpieces. The clamping screw provides approximately 1 1/4''...
Veritas Miniature Work Surface
The Veritas 11'' × 8'' miniature Worksurface is made from 18mm Baltic birch plywood and features an array of 17/64'' diameter dog holes, spaced 1 1/2'' apart.
It can be used in combination with the four miniature workbench accessories (Wonder Dog, hold-down, surface dogs and planing stops).
Four rubber feet help prevent the platform from shifting in use.
Made...
Veritas No 1 Bevel Up Plane + PM-V11 Blade
This Veritas bevel-up version of a No.1 bench plane has a sole measuring only 45mm wide and 148mm long. Size wise very similar to a block plane and like a block plane, light enough to use single-handed. This is a super bench plane for small-scale work.
It features a Norris-type adjuster for easy, accurate blade setting, and guide screws to center and fix the blade. The adjustable mouth can be closed...
Veritas Optional Depth Stop for Small Router Plane
This optional stainless-steel depth stop is for use with the Veritas Small Router Plane. To limit cutting depth to a preset maximum, the stop clamps onto the blade shaft.
Made in Canada.
Veritas Planing Stop
These low-profile work stops present a broad bearing surface. Particularly useful with thin or narrow workpieces, each 1 1/4" wide anodized aluminum rail projects just 0.22" above the bench top, allowing materials as thin as 1/4" to be worked or planed without obstruction. It also provides a reliable registration surface for materials too narrow to span two adjacent bench dogs.
The...
Veritas Pocket Layout Square - Metric
Just as a speed square is an essential layout tool for carpenters and framers, these small squares are similar in both form and function but are appropriately sized for laying out joinery and other common workshop tasks.
Available individually and as a set including 35mm, 60mm and 85mm squares – each a compact, lightweight tool that fits into a pocket, comes to hand nicely, and is easy to...
Veritas Round Burnisher
The secret to effective hand scraping is a good hook on the edge of the scraper. The Veritas burnisher has an extra hard, smooth finish that not only forms a uniform hook on all shapes of scrapers, but also minimises friction during burnishing.
Hardened to Rc58-60, this burnisher is substantially harder than the scrapers on which it is used. The 5/16" diameter A2 tool steel rod is 4 3/4"...
Veritas Router Plane
Veritas Router Plane
Veritas Scraper Burnisher for Woodturners
The Veritas Scraper Burnisher turns scrapers into cutting tools. Woodturners who are used to using scrapers with a grinder burr will be amazed at the difference a smooth edge-hook can make. After grinding a scraper, you just deburr the flat face and roll a hook onto the edge. The pressure you use determines the size of the hook.
Two 1" long carbide burnishing rods are supplied. One is ground...
Veritas Set of Miniature Surface Dogs
Just like its full-size version, this functional 1:3 scale surface dog has a flat face for work registration and a rim that supports and stabilizes it on a miniature workbench. The post fits in a 17/64'' diameter dog hole, resisting movement from horizontal forces. The face is 11/32'' × 3/16'' tall. Solid brass, the surface dog is non-corroding and kind to your tools.
To...
Veritas Set-Up Blocks - 9 Piece Metric Set
Setting up machines in the shop can be a frustrating and inaccurate undertaking. Tape measures and rulers are difficult to use when measuring gaps between curved bits and guide fences. Worse, machines often require two hands to adjust, leaving nothing to hold the measuring tool. The Veritas set-up blocks help solve this problem. Simply place the appropriate block or combination of blocks between the...
Veritas Shop Marking Knife
The unique handle shape on this marking knife lets you use it comfortably with a pencil grip when fine control is needed, or a pistol grip that allows greater force to be applied for a more visible line.
The removable blade design lets you flip the blade for right-hand or left-hand use, or for flush registration on either side of a reference surface.
The blade, made of PM-V11 tool steel, is 3/32"...
Veritas Short Blade Honing Guide
A frequent challenge faced by sharpeners of all skill levels is the safe and accurate honing of small or short blades. Spokeshave, small block plane and palm plane blades are too small for most guides. This short blade honing guide has the flexibility to hold small blades that other honing guides cannot handle.
Blades up to 2 5/8'' wide are easily aligned with the included registration jig...
Veritas Side-Clamping Honing Guide
The tried-and-true design of a side-clamping guide is familiar to most woodworkers. This side-clamping honing guide is a piece of modern-day engineering that improves on this established design while maintaining the flexibility of this type of guide. Chisels and plane blades ranging from 1/8" (3mm) to 2½" (63mm) fit securely for accurate honing. The unique three-point holding position...
Veritas Small Plough Plane - Lefthanded
This is the left handed version of Veritas' redesigned small plough plane. While it still excels at cutting grooves, rabbets and tongues, it now has the ability to cut decorative beading (beading blades available soon).
Closest in size to the classic Record #044 plane, the preferred size of the old-style plough planes, it has a 6 5/8'' long fence that registers solidly to the workpiece...
Veritas Square Fence
A carpenter's square is frequently needed just because of its size. The key disadvantage of such a square (its lack of a supporting fence ledge) can now be eliminated using a Veritas square fence.
The 8" (200mm) long anodized aluminum extrusion can be readily attached to either the stock or blade of your square (depending upon intended use) with the two integral brass screws. The face of...
Veritas Tabling Scribe
No matter how careful you are with layout and assembly, a legged project will almost always be wobbly. One way to ensure the project will sit properly without rocking is by tabling it; that is, placing the project on a fl at table (e.g., the top of a table saw), marking a consistent trimming line on each leg, and then cutting to this line. The Veritas Tabling Scribe simplifies this step, providing...
Veritas Tail Vice Screw
The tail vice screw is essentially the same construction as a shoulder vice screw but without an end guide, this tail vice screw has a clamping capacity of 17" less thickness of wooden jaws (not included) and is 21" overall.
1.1/8" diameter screw with single-lead Acme threads.
Mounting screws included.
Wooden Handle not included, but can be purchased as an optional extra.
Made...
Veritas Universal Variable Angle Plane Fence
Designed to fit a wide array of bench planes, including those made by some other manufacturers, this variable angle fence can be used left or right. Not just for right angles, the fence allows you to plane accurate and consistent angles from 45° to 135°.
Angles are set using a square or angle gauge, or directly on an angle you wish to match. A spring-loaded lever locks the fence and can...
Blade for Veritas Small Bevel-Up Bench Plane
Veritas 1¾" Blade - PM-V11 - 25° Bevel. Fits the Veritas Small Bevel-Up Bench Plane.
Blades for the Veritas Low Angle Smoothing Plane
Veritas 2" Blade in PM-V11 to fit the Veritas Low-Angle Smoothing Plane
Blades for the Veritas Scraping Plane
Blades for the Veritas large scraping plane 05P2901.
Blades for Veritas DX60 Block Plane
PM-V11 replacement blade for the Veritas DX60 and NX60.
Curved Replacement Blade for Veritas Dowel & Tenon Cutters
The curved blade is a replacement blade for the Veritas Dowel and Tenon Cutters. It can also be used on the 3/8", 7/16" and 1/2" Veritas Tapered Tenon Cutters (not recommended for the larger sizes as overheating may occur).
Handles for Veritas Low-Angle Block Plane
The bevel-up configuration of the Veritas low-angle block plane lets you vary the blade angle to suit the task, from low-angle blades for use on end grain to high-angle blades on figured wood. However, steeper cutting angles require more force to push the plane—a challenge for those with small hands or less strength.
We offer inexpensive hardwood grips to adapt our low-angle block plane into...
Lee Valley Cast Scratch Stock
Founded in 1825, Edward Preston & Sons, Ltd. produced some of the finest tools of the Victorian age.
This elegant hand reeder and beading tool can be used to cut decorative profiles into furniture (such as beading on small table or cabinet edges or reeding on chair and table legs). It can also be used with a straight cutter for shallow rabbeting work, such as on mirror and picture frames.
The...
Set of 4 Veritas Super Hard Scrapers
Most cabinet scrapers are sheared from spring steel, hardened to Rc38-42. These scrapers are harder (Rc48-52) and hold an edge longer. The edges are carefully milled to a square, sharp 90° ready for immediate use on fine work. For heavy-duty use, a hook must be burnished onto them. The prepared edges not only save you the initial effort of filing and stoning, but indicate the condition they should...
Slow Adjuster for Veritas Bevel-Up Planes - Type A
The fine thread on this Norris-style adjuster slows blade advancement, making it easier to set blade projection precisely. An easy retrofit, it simply replaces the regular adjuster supplied with our bevel-up planes.
Two versions are available. This type fits the bevel-up smoother, bevel-up jointer, low-angle jack, low-angle smooth and low-angle block planes.
Made in Canada.
Blades for Veritas Apron Plane
Veritas 1 1/4" blade for the Veritas Apron Plane. Available in O1 or PM-V11 steel with a 25° bevel, or an A2 toothed blade at 38°.
Blades for Veritas Low & Standard Angle Block Plane
Replacement blades for the Veritas Low & Standard angle block planes. 1 5/8'' wide.
Veritas 1 1/2'' Pocket Layout Square
The Veritas Pocket Layout Square is machined from solid aluminium extrusion, anodized and laser etched on both sides, this triangular layout square is only 1½" on a side. The 1/2" wide by 1/8" thick base registers solidly against a workpiece and has a 1/8" offset on one edge and 1/4" on the other.
Like a standard layout square, it has 1/16" rule graduations as well as angle graduations in 10°...
Veritas 3/4'' Surface Clamp
Hold down, bench clamp or surface clamp - the functions are the same just the name changes. True to form Veritas have taken an ordinary thing and made it much, much better - as well as a thing of beauty in brass and black satin.
These fast acting surface clamps can be used anywhere you can drill a 19mm diameter hole. The post has a wedging mechanism which anchors it firmly (horizontally or vertically)...
Veritas Aluminium Straightedges
These anodized aluminium straight edges are 1¾" high and 7/16" wide, and will not rust. The reference edge is machined flat to within 0.003" over the entire length. They are available in three lengths, 24", 38" and 50". The 24" straight edge weighs 1lb, the 38" weighs just under 2lb, and the 50" version weighs 2.5lb.
Veritas Apron Plane + PM-V11 Blade
This small, low-angle block plane from Veritas is the answer to a trim carpenter's prayers. At only 14oz it is half the weight of a standard block plane, a significant factor if you want to carry it with you all day.
The 5½" long, tough ductile cast iron body will take job-site accidents in stride. This is not a plane body that will break when dropped. It has good hand feel; the unique side...
Veritas Bar Gauge
Using a bar gauge lets you directly transfer and compare dimensions without conversion to numbers, reducing the chance of transcription errors. You can even use it to quickly test an assembly for squareness by checking that the diagonals are equal.
The base unit consists of two 6" steel rods fixed to aluminium clamp heads. The rods have threaded end holes that accept interchangeable brass...
Veritas Bar Gauge 12'' Extension Rods
This pair of 12'' extension rods can be used to extend the reach of the Veritas bar gauge, Veritas beam compass, or Veritas marking and transfer tool.
It can also be used with the fence and centre kit for the Veritas plunge base for rotary tools or the fence and centre kit for compact routers, in order to extend the reach of the fence. The rods have a male thread at one end and a female...
Veritas Bar Gauge Heads
Compares measurements e.g. equal diagnosis in drawers.
Transfers dimensions without converting into numbers.
Can be used for sizing shelves or interior trim on windows.
Gauge head openings are 13 x 19mm, rip 6mm slices to make bars (wood not included).
Veritas Basic Grinding Set
The Grinding Jig works with any power or hand grinder that has a tool rest. The back plate is offset for short chisels, such as Japanese or western butt chisels. The brass clamping bolts have nylon washers to prevent galling; other parts are made from hard aluminum, further hardened by anodizing to prevent wear. High-friction pads ensure solid clamping without inadvertent misalignment. Fits most tool...
Veritas Beading Blades for Combination & Small Plough Planes
All blades are made from PM-V11® tool steel. Blades are made in Canada. These blades are suitable for both the Veritas Small Plough Plane and Veritas Combination Plane.
These blades let you use the small plow plane to create decorative beading on workpieces. The blades are available in 1/8", 3/16" and 1/4" bead diameters. A 1/16" groove is cut on either side of the bead.
Veritas Beam Compass
A beam compass (or trammel) offers longer reach and easier adjustment than an ordinary compass. This updated beam compass is made largely of stainless steel, providing it with improved toughness and rust resistance, not to mention a more modern look.
The beams have threaded ends that let you link them together for longer reach. Just the base section of the beam compass deals with circles from...
Veritas Beam Compass Heads
Using a regular compass for small circles is OK, but for projects involving large circles or arcs, our beam compass heads are ideal.
The aluminium heads clamp onto a piece of wood between 5/8" and 3/4" thick, creating a compass whose radius is limited only by the length of stock you have at hand. Each brass clamping knob holds the head securely to the beam using a trapped pin that prevents pivoting...
Veritas Bench Dogs & Pups
These are made from solid brass rod. Sold in pairs.
The crosshatching and 2° slope on the face help to hold wood securely, pulling it down onto the bench's surface. A side spring slides cleanly and holds it in position.
The dogs are 110mm (4.3/8") long, the pups 60mm (2.3/8").
Both work well in combination with Veritas Wonder Dog and Wonder Pup Clamps. For 19mm (3/4")...
Veritas Bench Hold Down
The Veritas hold-down can clamp workpieces to a bench or anywhere a 3/4" hole can be drilled.
Exceptionally high clamping forces can be obtained with this hold-down for two reasons. First, with the arm free to pivot independently, all levered forces are exerted downward, without any losses due to horizontal slippage from the canting action of the hold-down post. Second, the fine barb-shaped grooves...