Sort By
Per Page
View
Grid
List
Lie-Nielsen Dowel Plates
If you want to make exact-sized dowels from any wood you choose, a Lie-Nielsen Dowel Plate is the best tool.
It's also handy to get a precise tenon on chair spindles. The Lie Nielsen plates are 1/4" x 5-5/8" x 1½" surface ground A2 tool steel. The holes are machined with 6-degree clearance taper on the underside, the holes are straight for the first .025"; so this tool can be sharpened many times...
Lie-Nielsen Fishtail Chisel
Fishtail Chisels are perfect for reaching the back corners of half-blind dovetails and paring other hard-to-reach areas. Their unique shape offers versatility for right and left hand recesses.
Made from A2 Tool Steel, hardened to RC 60-62. Hard Maple handles. Overall length is approximately 8".
The bevel comes ground sharp at 25º, but a higher secondary bevel is advisable, depending...
Lie-Nielsen Hand Scraper Blade Set
Lie-Nielsen Hand Scraper Set
A pair of 6" x 2 1/2" hand scrapers made from premium, high carbon Swedish Tool Steel.
One scraper is 0.02" thick, which makes a very flexible scraper. The second is 0.032" thick, which is much stiffer. These blades are ground square on the long edges, are easy to use and very handy.
Lie-Nielsen Honing Guide 18° Skewed Jaw Pair, Left Hand
The Lie-Nielsen 18° Skewed Jaw Pairs fit the Lie-Nielsen No. 140 Skew Block Plane (left or right hand).
The blade for the left hand No. 140 fits the left skewed jaws.
Lie-Nielsen Honing Guide 18° Skewed Jaw Pair, Right Hand
The Lie-Nielsen 18° Skewed Jaw Pairs fit the Lie-Nielsen No. 140 Skew Block Plane (left or right hand).
The blade for the right hand No. 140 fits the right skewed jaws.
Lie-Nielsen Honing Guide 30° Skewed Jaw Pair, Left Hand
These Lie-Nielsen 30° Skewed Jaws fit the Lie-Nielsen No. 98/99 Side Rabbet Planes (left hand).
Lie-Nielsen Honing Guide 30° Skewed Jaw Pair, Right Hand
These Lie-Nielsen 30° Skewed Jaws fit the Lie-Nielsen No. 98/99 Side Rabbet Planes (right hand).
Lie-Nielsen Honing Guide Chisel Jaw Pair
The Lie-Nielsen Chisel Jaws fit their 1/8" and 3/16" Bevel Edge Chisels (as well as the 1/4" to 3/4" Bevel Edge Chisels).
Lie-Nielsen Honing Guide Long Jaw Pair
The Lie-Nielsen Long Jaws fits blades for all their spokeshaves and for all the following Lie-Nielsen planes: No. 610, 10¼, 041, 042, 073, 1/2, and 85.
These jaws are reversible. The short end hones a bevel up to 40° and the long end hones a bevel up to 30°.
Lie-Nielsen Honing Guide Mortice Chisel Jaw Pair
The Lie-Nielsen Mortice Chisel Jaws fit all Lie-Nielsen Mortice Chisels, as well as their 1" Bevel Edge Chisel.
Lie-Nielsen Large Router Plane Closed Throat
A router plane is a great tool for working shallow mortices - hinge gains, inlay, doorlocks, trimming tenons and the like. Lie-Nielsen's version is based on an early Stanley 071 model, but with a closed throat which is ideal for working on the edges of boards or cleaning out the end of a stopped groove in a rail or stile. Also, the blade is held solidly in the body in a square broached hole (blades...
Lie-Nielsen Leather Saw Cases
Protect your Backsaw with this fitted Michigan Leather case. Use it for storage and transportation. Beautifully made in Maine.
Lie-Nielsen Low Angle Smoother
The Low Angle Smoothing Plane is based on the rare Stanley 164, and is essentially a shorter version of the Low Angle Jack Plane - with an adjustable mouth, and a massive 2" (5.08cm) wide, 3/16" (4.7mm) thick blade, set at 12°. However, this tool is only 9½" (24.1cm) long and weighs 3¾ lbs.
It is called a Smoothing Plane because of its size (the same as the Lie-Nielsen...
Lie-Nielsen Model Maker's Block Plane No.100
This delightful, small low angle tool fits snugly in the palm of your hand. It is a miniature work-horse ideal for all sorts of chamfering and trimming jobs.
Blade is 7/8" wide, .125 thick. At 4 3/8" long and 1 1/4" wide, weighing 8oz, this plane is effortless to use.
Lie-Nielsen Mortice Chisel Roll
7 pocket leather tool roll, Brass fittings. Deeper tool roll accommodates the Lie-Nielsen mortise chisels. Beautifully made in Maine, USA.
Lie-Nielsen Mortice Chisels
SPECIAL NOTE - MARCH 2025
Please have a look at our Friday Finds section as we currently currently have 2 pre-owned (but hardly used) sets that will save you a few well earned pounds!
Designed with cabinetmaking in mind, these well-balanced Mortise Chisels are ground with parallel sides and are thicker than they are wide to help keep them straight in the cut.
Made of A2 Tool Steel, hardened...
Lie-Nielsen No 101 Violin Maker's Plane
This pocket-sized block plane is the smallest of the Lie-Nielsen hand planes to feature a captive nut blade adjuster for precisely controlled depth of cut.
Loosely based on the Stanley No.101 block plane, the Lie-Nielsen Violin Maker’s Plane features several significant improvements that put it in a class of its own. The body and cap are made from Manganese Bronze for extra weight, durability,...
Lie-Nielsen No. 212 Small Iron Scraping Plane
Please note that this is the iron version, the bronze version is temporarily unavailable.
Scraping Planes are used for finishing woods that do not yield well to the hand plane. A scraping plane is more comfortable to use than a hand scraper, and a plane body helps you keep the surface you are scraping flat.
They can be tricky to master, however. To make it easier, Lie-Nielsen do not recommend...
Lie-Nielsen No. 85 Scraper Plane
Scraping Planes are used for finishing woods that do not yield well to the hand plane. A scraping plane is more comfortable to use than a hand scraper, and a plane body helps you keep the surface you are scraping flat.
They can be tricky to master, however. To make it easier, Lie-Nielsen do not recommend using a burr, at least until you’ve learned how to use the tool. These tools will cut...
Lie-Nielsen No.073 Large Shoulder Plane
A versatile, general purpose Shoulder Plane with nice heft and the best size to start with. This all-metal Shoulder Plane is based on the Record 073, which in turn was based on a Preston model.
The Bronze lever cap is higher for better grip and closer to the blade bevel for better support. The mouth geometry allows for better chip clearance, while the adjustable mouth and locking screws are large...
Lie-Nielsen No.140 Skew Block Plane - Iron (Right)
The Lie-Nielsen No 140 Skew Block Plane in iron. This is based on the long unavailable Stanley 140, this multi-talented tool is designed to deal with difficult woods using a combination of a low angle approach, shear cutting action from the skewed and tilted blade.
A retractable nicker scores cross-grain fibres, and the removable side plate and adjustable fence allow quick conversion to rabbeting...
Lie-Nielsen No.4 Bronze Smoothing Plane
Lie-Nielsen's smoothing planes are precision machined from a manganese bronze casting, or an iron casting. They all come with a beautifully formed handle and knob made from American cherry. They have the Stanley Bedrock style frog which gives a fully machined mating fit between the frog and body. You can move the frog backwards or forwards, allowing the opening or closing of the plane's mouth...
Lie-Nielsen No.40B Butt Mortice Plane
The Butt Mortice is a simple to use plane that produces precise mortices of uniform depths with sharp, square corners.
The body is cast iron with a bronze blade cap, and the handles are polished cherry. The sole has a long slot that gives a clear view of your work and allows for quick removal of shavings. The plane measures 9 3/4" x 1", with a 3/4" wide blade.
Lie-Nielsen No.51 Shooting Board Plane - Right Hand
The Lie-Nielsen Shooting Board Plane is a single purpose plane is designed to trim mitres and other end grain cuts on a shooting board. Stanley first made its version in 1909 along with a metal shooting board. Lie-Nielsen had many requests for this tool over the years, so we are pleased they redesigned the Stanley version.
The Lie-Nielsen version utilises a standard 60mm (2.3/8") bench plane...
Lie-Nielsen No.6 Fore Plane
The Lie-Nielsen No.6 Fore Plane is sized midway between a Jack and a Jointer. The No.6 Fore Plane is designed to further true the surface after the Jack has sized it. Its length enables it to skim off high spots as it bridges low spots, delivering a leveled surface ready for the smoothing plane.
18" (457mm) long
2 3/8" (60mm) blade. A2 steel.
Iron body. 7½lbs (3.4kg).
...
Lie-Nielsen No.7 Jointer
The Lie-Nielsen No.7 Jointer Plane is a great plane for edge jointing and flattening larger areas.
The late, great Alan Peters used his No.7 for pretty much everything, and today we still come across ex-students which still favour their jointer over any other plane.
The equivalent of a later type Stanley Bedrock No.607 jointer plane.
22" (558mm) long.
2 3/8" (60mm) wide blade....
Lie-Nielsen No.8 Jointer
The Lie-Nielsen No.8 Jointer, a real whopper of a plane. It is the largest production plane at 24" (610mm). It will flatten and true like no other.
24" (610mm) long.
2-5/8" (66mm) wide blade. A2 steel.
Iron body, 10lbs (4.5kg).
Lie-Nielsen No.95 Edge Trimming Block Plane (Right Hand)
The Lie-Nielsen Edge Trimming plane is based on Stanley's No.95 plane, but you get the added choice of either right or left handed versions.
It has a fixed fence that holds the iron at a 90 degree angle against the edge of a board. For boards up to about ¾" wide, this tool is a very convenient way to get square edges. Precision machined from a manganese bronze casting.
!!!!
Small Blade Adapter for Lie-Nielsen Large Router Planes
This adaptor enables you to use the specialty blades for the Small Router Planes in the Large Router Planes.
Spare Blade for Lie-Nielsen Small Bronze Spokeshaves
Replacement blade for the Flat or Curved Sole Small Bronze Spokeshaves. Comes with a 25° flat ground bevel.
* 1.375" wide x .125" thick
* A2 cryogenically treated Tool Steel
Lie-Nielsen Small Router Plane Closed Throat
Loosely based on the Stanley No. 271, these small Router Planes are perfect for shallow mortise and small relief work. The compact design makes it easy to guide along narrow edges and fit into tight spaces.
The Closed Throat design gives more support in front of the blade, making it ideal for working on the edges of boards or cleaning out the end of a stopped groove in a rail or stile.
Lie-Nielsen...
Lie-Nielsen Small Spokeshave
This Lie Nielsen spokeshave is based on a lovely tool that hasn’t been available since Edward Preston and Sons went out of business in the 1930’s.
Lightweight but solid.
Redesigned for fine, precise shaping work in all woods.
Available with a flat or curved sole (1-1/2" radius).
6-3/4" long, with a 5/8" wide sole
Bronze body and cap with with an A-2 cyro blade...
Lie-Nielsen Tongue & Groove Plane - 1/2''
The Lie-Nielsen Tongue & Groove Plane (1/2") cuts a groove with one side of the cutter exposed. Swing the fence to expose both sides to cut the tongue. The slot in the one-piece blade registers on the milled body casting, to ensure squareness and equal depth of cut on both sides. Since this is a heavy stock removal tool no depth adjuster is needed.
Made to centre on 1/2" stock, tongue...
Lie-Nielsen Tongue & Groove Plane - 3/4''
The Lie-Nielsen Tongue & Groove plane cuts a groove with one side of the cutter exposed. Swing the fence to expose both sides to cut the tongue. The slot in the one piece blade registers on the milled body casting, to ensure squareness and equal depth of cut on both sides. Since this is a heavy stock removal tool no depth adjuster is needed.
Comes with a 3/16'' (4.8mm) thick A2 steel...
Replacement Blade for Tite-Mark Marking Gauge
Replacement Blade for Tite-Mark Standard and Long Marking Gauges.
Tite-Mark - Mortice Blades (pair)
Pair of Mortice Blades for laying out mortices for Tite-Mark Standard and Long Marking Gauges
Tite-Mark Extensions
A pair of extension rods to fit the Tite-Mark Standard. One 3" (7.62cm) and one 6" (15.24cm) extension rod may be used individually or joined together to extend the reach of the Titemark an extra 9" (22.86cm) by being screwed onto the blade end.
Tite-Mark Fixed Width Mortice Blade Set
Tite-Mark fixed width mortice blades - set of 4 with hex key.
1/2", 3/8", 5/16" and 1/4" for Tite-Mark Standard and Long Marking Gauges
Tite-Mark Long
The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen.
The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head.
Tite-Mark Scoring Blade
Tite-Mark scoring blade for deep marking, slicing veneer strips and other general scoring tasks for the Tite-Mark Standard and Long Marking Gauges
Lie-Nielsen 1 1/2'' (38mm) Bevel Edge Socket Chisel
Lie-Nielsen have gone big! After many years of it being discussed we have 1-1/2'' version of their beloved chisels.
The Lie-Nielsen Chisels are based on the Stanley 750 Bevel Edge Socket Chisels. Socket chisels are not common these days, perhaps because they are expensive to make, but Stanley and others once produced these chisels in a vast array. Socket chisel handles are less likely to...
Spare Blade for Lie-Nielsen No. 62 Low Angle Jack Plane
Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane.
The blade comes with a 25° flat ground bevel; it sits in the tool at 12°, making the included cutting angle 37°.
The blade comes ready to use, but honing a secondary bevel of 5° or 10° will increase performance, help achieve a razor edge quickly, and improve edge life in hardwoods.
* 2" wide x .175" thick
* A2 cryogenically...
Spare Blade for Lie-Nielsen 95 Edge Plane
Replacement blade for the Lie-Nielsen No. 95 Edge Planes. Comes with a 25° flat ground bevel.
1.105" wide x .125" thick
A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen Convex Sole Block Plane
Maintain the exceptional performance of your Lie-Nielsen No. 100-1/2 Convex Sole Block Plane with this high-quality replacement blade. Designed specifically for precision and durability, this spare blade ensures your plane continues to deliver smooth, efficient results.
Key Features:
High-Quality Material: Made from A2 cryogenically treated tool steel, this blade is engineered for durability...
Toothed Blade for the Lie-Nielsen 101 Violin Makers Plane
Toothed blade for our No. 101 Violin Maker's Block Plane. Comes with a 25° flat ground bevel.
7/8'' wide x 1/8'' thick
A2 cryogenically treated Tool Steel
Please Note: Toothed blades are great for quick, heavy stock removal. However, something like a knot in pine can break the teeth so be careful around difficult spots. We recommend that you hone your toothed blade...
Toothed Blade for the Lie-Nielsen 102 Block Plane
Replacement blade for the No. 102 or No. 103 Block Planes. Comes with a 25° flat ground bevel.
1.250'' wide x .125'' thick
A2 cryogenically treated Tool Steel
Toothed blades have small chisel-like teeth .030'' (.762mm) wide, and spaced .030'' apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
Please...
Spare Blade for Lie-Nielsen No. 2 Bench Plane
Replacement blade for the Lie-Nielsen No. 2 Bench Plane.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Their heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very...
Spare Blade for Lie-Nielsen No. 041 Small Shoulder Plane
Replacement blade for Lie-Nielsen No. 041 Small Shoulder Plane. Comes with a 25° flat ground bevel.
5/8" wide x .140" thick
A2 cryogenically treated Tool Steel