Sort By
Per Page
View
Grid
List
Tormek Small Knife Holder
The Tormek Small Knife Holder SVM-00 opens up the possibility to sharpen those really small knife blades, which up until now have been difficult to sharpen.
Normally small knives have been sharpened free-hand but every time it was a challenge to get a consistent shape and almost impossible to control the edge angle.
The holder works together with the Tormek Knife Jig SVM-45.
You can sharpen...
Tormek Square Edge Jig
With the Tormek SE-77 Square Edge Jig, it is easy to set your wood chisels and plane irons for sharpening to a square corner. The design gives you the best conditions for a successful sharpening with the highest precision over the final result. You can also set the jig for a slightly convex shape.
The SE-77 Square Edge Jig is a further development of the SE-76 jig. It has been provided with an...
Tormek Stone Grader
With the Tormek Stone Grader SP-650 you can change the grit size of the Tormek original grindstone to give a finer sharpening surface. The other side of the Stone grader is used to maintain the grindstone, bringing new abrasive grains to the surface for an effective sharpening.
The Tormek Original Grindstone is designed so that it can be treated with the Stone Grader to change its quality from fast...
Tormek T8-00 Storage Tray
The Tormek T8-00 Storage Tray stores all the accessories included with the Tormek T-8. The storage tray has an improved design and is customized to fit in the Tormek Case TC-800 and the Sharpening Station TS-740.
The storage tray is made of EPP, a permanent construction material that is durable and ready for many years of holding jigs in their places.
Designed to hold:
WM-200 AngleMaster
HB-10...
Tormek TC-800 Case
The Tormek Case keeps your jigs and accessories organized and is easy to carry thanks to the premium leather handle. The case is made of high-quality materials with a slidable lid that keeps everything in place.
These cases are stackable for easy storage and compatible with the new storage trays HTK-00, TNT-00 and T8-00. The storage trays are redesigned and made of EPP, a permanent construction...
Tormek TNT-00 Storage Tray
The Tormek TNT-00 Storage Tray stores all the jigs included with their Woodturner's Kit. The storage tray has an improved design and is customized to fit in the Tormek Case TC-800 and the Sharpening Station TS-740.
The storage tray is made of EPP, a permanent construction material that is durable and ready for many years of holding jigs in their places.
Designed to hold:
TNT-300 Woodturner's...
Tormek Turning Tool Setter
The Tormek Turning Tool Setter TTS-100 is the key to an efficient sharpening of woodturning gouges and skews. It enables you to exactly create and replicate the edge angle on your bowl and spindle gouges as well as on your flat or oval skews with either a straight or a curved edge.
TTS-100 works in conjunction with the Gouge Jig SVD-186 and the Multi Jig SVS-50.
By knowing your exact profiles,...
Tormek US-105 Universal Support with Micro Adjust
The Tormek Universal Support is the basis for all Tormek jigs. US-105 has a square cut Acme style thread which prevents damage by the locking screws and a Micro Adjust with scale for precise setting of the edge angle and cutting depth.
Fits Tormek T-8, Tormek T-7 and Tormek 2000.
The versatile Tormek Universal Support is the basis of the Tormek system. It is made of 12mm (approx. ½")...
Tormek US-430 Extended Universal Support with Micro Adjust
The Tormek Extended Universal Support for sharpening long tools, such as long knives, cleavers and machetes. Micro adjust with scale for precise setting of edge angle and cutting depth.
Fits Tormek T-8, Tormek T-7 and Tormek 2000.
Length: 436mm. Height: 212mm.
Can be placed in these positions:
- Vertically for sharpening towards the edge.
- Horizontally for sharpening with the edge.
-...
Tormek Woodturners Kit
The Tormek Woodturners kit contains everything you need to shape and sharpen all your turning tools, including two patented jigs (works like three!), a radiused leather honing wheel, a serious instruction, the appreciated Turning Tool Setter and the Tormek Case to store all your jigs.
The jigs are packed in TC-800 Tormek Case with the included TNT-00 Storage Tray. The Tormek Case keeps your jigs...
Tormek XB-100 Horizontal Base
The Tormek XB-100 Horizontal Base is an upgrade for earlier Tormek machine models. With the Horizontal Base you can move the Universal Support from vertical mount (for grinding towards the edge) to horizontal mount for grinding away from edge.
Vallorbe Triangular Saw Files
To choose the right file, size it to the tooth. Ideally, about half of the cutting surface of the file will be in contact with the tooth -- half of the file will be in the gullet and the other half unused. When you rotate the file to get a fresh edge, it will be uniformly sharp. If you use a smaller file, only some of the new surface will be fresh and the rest dull.
Veritas Saw File Holder
Not only does this Veritas Saw File Holder provide a secondary grip for your saw file, it also helps you control the angle of the file as you sharpen, using the eye's natural ability to judge parallel and level.
It has a rotating collar for setting a positive or negative rake angle up to 30°, and a 3" wide protractor to set the fleam (or bevel) angle up to 45° left or right. All you need to...
Grobet Auger Bit File
Auger bit files are double ended, with one end having teeth cut along the face with uncut edges, and the other with teeth cut along the edge and uncut faces.
This version, made by Grobet in Italy is very nicely made, with each end of the file tapered in two dimensions, and a finely shaped centre section to grip when working.
Length 7'' - Steel (8oz)
Made in Italy by Grobet
Vallorbe 10" Blunt Mill File Single Cut
Vallorbe single cut mill files are used in preparation for saw sharpening, and for squaring the edges of cabinet scrapers prior to sharpening. Can be used in conjunction with Veritas Jointer/Edger. Handles are also available, please see separate listing.
Lee Valley Saw File Roll
Storage roll for your saw files. Keeps the files from rubbing together.
Does not include any saw files.
A Sharpening Handbook
by Richard D. Wile
There are many books available on sharpening, however as Richard Wile points out, “sharpening has evolved.” He has directed his book towards the novice to intermediate sharpener, with the aim of enhancing their experience with advice on guides, new and traditional media, and techniques.
Techniques cover the primary hand tools in most woodworkers’ workshops...
Set & File: A Practical Guide to Saw Sharpening
by Matt Cianci
In "Set & File," Matt Cianci (aka The Saw Wright) teaches you the fundamentals of maintaining backsaws and handsaws: how to file and joint your saws with the correct rake, fleam and pitch to keep them cutting sharp. You'll also learn how to deal with saw teeth that are in good shape but dull, plus how to successfully doctor teeth that have been abused.
Plus, Matt...
Sharp
Sharpening for all - green woodwork, workshops, bushcraft, gardening, carepentry, forestry, builders, cooking and craft
Sharp is a book that will guide the reader through the principles and practice of sharpening.
From definitions and requirements in the chapter 'What is Sharp?' and through chapters explaining edge geometry, how to observe the edge to determine correct sharpening procedures required,...
Sharpen This
by Christopher Schwarz
Sharpening is not a sport.
If you want to be a better woodworker, you need to learn to sharpen. If you want to be a better sharpener, you need to stop paying so much attention to tertiary bevels and carbide formations in steel and start paying attention to the wood. If the wood is cut cleanly, then your tools are sufficiently sharp. If the wood is torn out and covered in...
Sharpening Profiled Hand Tools
with Larry Williams
Sharpening hand tools with profiled edges can be a challenge. Larry Williams has years of experience and shares it here, showing how he handles sharpening various moulding planes blades, and other specialised tools that often are not sharpened correctly or well.
92 Minutes. Lie-Nielsen Toolworks Productions, 2009.
The Perfect Edge
By Ron Hock,
Nearly every operation in woodworking uses a piece of steel between the woodworker and the wood. This steel needs to be cared for and sharpened for the best results. "The Perfect Edge" is an up-to-date book on sharpening every woodworking tool, using the latest sharpening stones, tools and techniques. The author brings more than twenty-five years of experience, working with demanding...