Friday Finds

Pre-owned. We have given this a little clean and it is in perfect working order. For use on benches/work surfaces from 16mm - 100mm (5/8'' to 4'') thick. You can read a full description here It comes with the 3 1/2'' dia. by 1/2'' thick mounting plate with steel rod as photographed.

£100.00 inc VAT

Veritas Custom-made No.4 - Smoothing Plane (with 55 degree and 45 degree frogs) [Preowned, SOLD]

Veritas Custom-made No.4 - Smoothing Plane (with 55 degree and 45 degree frogs) [Preowned, SOLD]

This plane has a fitted 55 degree frog with a 2'' wide PMV11 blade, large rear tote (back handle) and wide front knob. It also has a 45 degree frog should you wish to change your blade angle. Original box and instruction leaflet. Norris style central stainless steel adjusting screw. Lateral setscrews centre the plane blade in the plane mouth The width of mouth opening can be adjusted...

£285.00 (VAT exempt)

Veritas Magnetic Rule Magnifier 05N5701 [Preowned, Unused, SOLD]

Veritas Magnetic Rule Magnifier 05N5701 [Preowned, Unused, SOLD]

The rare earth magnets in the 28mm diameter base which holds a short post that has a magnet at its head to hold the magnifier. This allows you to accurately read small measurements on your steel rule. (See photo - steel rule not included in the sale) Unused in original box

£24.00 inc VAT

Veritas Medium Router Plane - 1/4'' blade [Preowned, SOLD]

Veritas Medium Router Plane - 1/4'' blade [Preowned, SOLD]

Slightly larger than the Veritas small router plane, this tool has the advantage of using the same blades as Veritas' full-size router planes. For general use, the blade may be positioned inboard with the sole encircling it for maximum registration on the workpiece, even when approaching from the side or working an edge. This allows it to bridge recesses, providing great stability even on narrow...

£120.00 (VAT exempt)

Veritas Optical Center Punch 05N59.01 [Preowned, Unused, SOLD]

Veritas Optical Center Punch 05N59.01 [Preowned, Unused, SOLD]

This is now discontinued by its makers who said this about it...(apologies for the misspelling of the word centre!) ''To keep a twist drill from skating on metal (and leaving you with a hole in the wrong place) you should always use a center punch, especially when using small flexible bits. The dimple created by the punch holds the bit point true. The Veritas optical center punch simplifies...

£30.00 inc VAT

Veritas Scraper Shave [Preowned, Unused, SOLD]

Veritas Scraper Shave [Preowned, Unused, SOLD]

Sold

£54.00 inc VAT

Veritas Side Rebate Plane [Preowned, SOLD]

Pre-owned plane in original box. Very little used. This is the description of the plane which sells for £163 new. The Veritas Side Rebate Plane is used for cleaning up or trimming sidewalls of rebates, dadoes or grooves to yield a perfect fit with its mate. It has a practical dual-blade configuration, coupled with an ingenious pivoting handle that permits right- or left-hand use to accommodate...

£112.00 (VAT exempt)

Veritas Small Low Angle Smoothing Plane [Preowned, Unused, SOLD]

Veritas Small Low Angle Smoothing Plane [Preowned, Unused, SOLD]

Pre-owned but unused, with Veritas plane sack. This description is from our web site (this plane currently is out of stock there). "This Veritas low angle smoother is 225mm long, 59mm wide and weighs only 1.25kg. It is easier to handle than a full size smoother. Think of it lying somewhere between a large block plane and a full size smoother, then you’ll see just how useful this plane can be. Like...

£216.00 inc VAT

Veritas Small Scraping Plane [Preowned, Unused, SOLD]

Veritas Small Scraping Plane [Preowned, Unused, SOLD]

Pre-owned but unused. The Veritas Small Scraping Plane is a great tool for the final smoothing of small, flat surfaces, even highly figured timber, or small areas of difficult grain within a larger surface. The scraping plane comes into action after the surface has been prepared as well as possible using a finely tuned smoothing plane. What the scraping plane does is to replace the need for sanding...

£125.00 (VAT exempt)

Veritas Wonder Honing Guide Bundle [Preowned, SOLD]

Veritas Wonder Honing Guide Bundle [Preowned, SOLD]

Sold

£125.00 inc VAT

Vintage Coopers Inshave - William Graves & Sons - Sheffield [Preowned, SOLD]

Pre Loved

£30.00 inc VAT

William Marples 5/8'' socketed Lock Mortise Chisel [Preowned, SOLD]

William Marples 5/8'' socketed Lock Mortise Chisel [Preowned, SOLD]

17 1/2'' overall with a short stubby (slightly battered) beech handle. Original Marples trade label on handle. Also stamped W.Marples & Sons, Sheffield, England on the steel. This is the improved sock mortise chisel pattern No.745 This is in G++ condition You can learn more here.. https://williammarplesandsons.com/lock-mortice-chisels/

Was £35.00 Now £25.00 inc VAT

Woodpeckers - 2616SS Square - 600mm [Preowned, Unused, SOLD]

Woodpeckers - 2616SS Square - 600mm [Preowned, Unused, SOLD]

Pre Loved

£270.00 inc VAT

Woodpeckers - 6'' Carpenters Combination Square [Preowned, Unused, SOLD]

Woodpeckers - 6'' Carpenters Combination Square [Preowned, Unused, SOLD]

Pre-owned, but the condition is ''as new''. The Woodpeckers 6'' Carpenters Square is a perfectly machined combination 90-degree and 45-degree with handles for a physical reference to the edge of the workpiece. The blade is machined from cast and ground aluminium tool plate. This expensive material is utilised for its mechanical stability and tendency to maintain close...

£50.00 inc VAT

Woodpeckers - 600mm Rule with Rule Stop 2 [Preowned, Unused, SOLD]

Woodpeckers - 600mm Rule with Rule Stop 2 [Preowned, Unused, SOLD]

Unused, as new. The rule reads left to right up to 600mm on one bevelled edge. 0-300mm from the centre on the other edge. This is supplied with a Rule Stop 2 to help you repeat accurate marking out. (Note - The ends of the rule have threaded holes that allow you to mount an optional Hook Stop)

£72.00 inc VAT

Woodpeckers - 900mm Edge Rule [Preowned, Unused, SOLD]

Woodpeckers - 900mm Edge Rule [Preowned, Unused, SOLD]

Pre-owned but unused and in fine condition. 900mm Woodpeckers Edge Rule. ''Measuring the narrow edge of stock with typical rules is a little awkward. Getting the rule parallel to the stock and leaving yourself room to make a tick mark can become quite a juggling act. Working on the face of a piece is usually a little easier, but you can still struggle to keep the rule parallel to...

£38.00 inc VAT

Woodpeckers - Rule Stop 2 [Preowned, Unused]

Pre-owned but unused, so as new. Simply take any ruler (or look at our Woodpeckers Friday Finds or Woodpeckers Section) and add this well engineered stop to help you repeat your accurate marking out. Selling in our Woodpecker Section for £52

£38.00 inc VAT

Woodpeckers - SERX Precision Straight Edge - 36'' [Preowned, Unused]

This is a pre-owned Imperial 36'' straight edge with bevelled graduated edge (1/32''s). This would be super useful for setting up your jointer or table saw. Crazy accuracy with .003'' tolerance. The base edge has two edges for increased stability. Machined from aircraft grade aluminium and anodised for protection and appearance. We do not believe this straight edge...

£84.00 inc VAT

Woodpeckers - Setup Blocks (Metric) - 10pc Set [Preowned, SOLD]

Woodpeckers - Setup Blocks (Metric) - 10pc Set [Preowned, SOLD]

Woodpeckers Precision Setup Blocks Beat a Tape Measure Every Time Stop Squinting! Have you noticed that as the years go by, the marks on rules and tapes seem to get closer and closer together? Uncle Albert has had this problem for a long time now. Here’s a way to get those tiny lines out of your life when working on critical machinery set ups. Woodpeckers Setup Blocks give you precise physical references...

£80.00 (VAT exempt)

Woodpeckers 150mm Precision Square (No. 641) [Preowned, SOLD]

Woodpeckers 150mm Precision Square (No. 641) [Preowned, SOLD]

What sets Woodpeckers squares above the rest is their one-piece central core design. Rather than a blade attached to a beam, as you will find in most try-squares of this size, the 641 has one piece of tool plate aluminium meticulously machined into a square. Then cheeks are added to the central core with stainless steel location pins. The cheeks are 1/4'' (6mm) narrower than the central core, forming...

£80.00 (VAT exempt)

Woodpeckers 200mm Precision Square (No.851) [Preowned, SOLD]

Woodpeckers 200mm Precision Square (No.851) [Preowned, SOLD]

What sets Woodpeckers squares above the rest is their one-piece central core design. Rather than a blade attached to a beam, as you will find in most try-squares of this size, the 851 has one piece of tool plate aluminium meticulously machined into a square. Then cheeks are added to the central core with stainless steel location pins. The cheeks are 1/4'' (6mm) narrower than the central core, forming...

£100.00 (VAT exempt)

Woodpeckers 300mm Centre/Standard Rule with end stop [Preowned, Unused, SOLD]

Woodpeckers 300mm Centre/Standard Rule with end stop [Preowned, Unused, SOLD]

Sold

£36.00 inc VAT

Woodpeckers 300mm Precision Square (No.1281) [Preowned, SOLD]

The core of the 1281 is a precisely machined square milled from cast and ground tool plate......the most stable aluminium in the world. The stability of the material and the methods Woodpeckers use to machine the core mean they all hold the tolerance to +/-.0085°. To this highly accurate core they add cheeks to make the base thicker. Metric graduations One piece central core Cheeks are narrower...

£120.00 (VAT exempt)

Woodpeckers 300mm Rule with end stop [Preowned, Unused, SOLD]

Woodpeckers 300mm Rule with end stop [Preowned, Unused, SOLD]

Woodpeckers 300mm Rule with end stop. Unused, as new. Reads left to right to 300mm on one bevelled edge. 0-150mm from the centre on the other edge.

£38.00 inc VAT

Woodpeckers 600mm Centre/Standard Scale rule w/ Rule Stop 2 & End Stop [Preowned, Unused, SOLD]

Woodpeckers 600mm Centre/Standard Scale rule w/ Rule Stop 2 & End Stop [Preowned, Unused, SOLD]

Sold

£75.00 inc VAT

Woodpeckers 6SS Carpenters Square [Preowned, SOLD]

The fixed 90° and 45° angles are accurate to within .0085° or better. The square’s stout construction, including a stainless steel blade, means it will last a lifetime and never lose tolerance. The tool’s aluminum handles are registered on the base of the square with precision-milled, tight-tolerance steel pins, then fastened with stainless steel socket head screws. Woodpeckers Model 6SS Carpenters...

£88.00 (VAT exempt)

Woodpeckers Box Clamps - Set of 4 [Preowned, SOLD]

Woodpeckers Box Clamps - Set of 4 [Preowned, SOLD]

The Woodpeckers Box Clamp is designed for clamping cases, drawers, cabinets and most other boxes made from material 1/4" - 1" thick. Its main advantage is its ability to apply simultaneous in and downward pressure against 2 perpendicular pieces. The box clamp can be assembled in "fixture mode" or "hand clamp mode"- either way it works the same with the difference being from which side of the clamp...

£75.00 (VAT exempt)

Woodpeckers Corner Jig (with 12 Radius and 6 Chamfer Attachments) [Preowned, SOLD]

Woodpeckers Corner Jig (with 12 Radius and 6 Chamfer Attachments) [Preowned, SOLD]

12 Radius templates (originally sold with 16, however this set does not include the 4 biggest sizes) 6 chamfer templates Here is some video information that shows you how useful this jig could be. Radius or Chamfered corners? The choice is yours with Woodpeckers Corner Jig Corner Jig | Woodpeckers Woodworking Tools Only one of the radius corners seems to have been well used, only a...

£225.00 (VAT exempt)

Woodpeckers Equal Space Divider [Preowned, SOLD]

Woodpeckers Equal Space Divider [Preowned, SOLD]

This very handy tool divides your space into 6 equal parts from 3/4" (20mm) to 4" (100mm) Based on the mathematical theory of the parallelogram this tool has arms that always move parallel to each other and stay perpendicular to the target line which allows you to be able to draw a line instead of just a point. Laser cut from stainless spring steel with Swiss machined precision pins made to very exacting...

£88.00 (VAT exempt)

Woodpeckers inDEXABLE Mini Double Square - Imperial 4 [Preowned, SOLD]

Woodpeckers inDEXABLE Mini Double Square - Imperial 4 [Preowned, SOLD]

Sold

£54.00 inc VAT

Woodpeckers Medium & Large Bevel Squares & Reference Plate - The Deluxe Set [Preowned, SOLD]

The stainless-steel blade of the bevel squares has a beautiful satin finish. Stainless steel is also used throughout the internal blade locking mechanism. The handles are milled from a solid aluminium billet and then anodized to give it the familiar “Woodpeckers Red” appearance and outstanding corrosion protection. The Angle Reference Plate, the perfect companion. When you need to transfer...

£225.00 (VAT exempt)

Woodpeckers One Time Tool - Large Steel & Aluminium Panel Gauge [Preowned, SOLD]

Woodpeckers One Time Tool - Large Steel & Aluminium Panel Gauge [Preowned, SOLD]

600mm with 1mm graduations on a round bar. 165mm fence. Screw out turnscrew at one end with a circular marking cutter at the business end. This screams quality. A heavy duty item.

£88.00 inc VAT

Woodpeckers OneTIME Tool - 36'' Steel Straight Edge [Preowned, SOLD]

Woodpeckers OneTIME Tool - 36'' Steel Straight Edge [Preowned, SOLD]

This 36" pre-owned steel straight edge is 7/32'' thick by 2 1/2'' wide Heavy duty to check for flatness with a miserly 0.0002'' tolerance per foot In very good condition. This tool was discontinued by Woodpeckers about 4 years ago.

£85.00 (VAT exempt)

Woodpeckers Parallel Guide System [Preowned, Unused, SOLD]

Woodpeckers Parallel Guide System [Preowned, Unused, SOLD]

Pre Loved

Was £350.00 Now £275.00 inc VAT

Woodpeckers Pocket Compass Set [Preowned, SOLD]

Woodpeckers Pocket Compass Set [Preowned, SOLD]

Little used, no case. PCOMP21-SET. Composed of Pocket Compass XL & Pocket Compass. Metric & Imperial Scaling. A traditional divider-style two-legged compass leaves a lot to be desired in a woodworking shop. The slightest nudge can change the setting. The pivot point is approaching the stock at an angle, so it likes to skate out of position. And, they’re just plain awkward to carry around (not...

£85.00 (VAT exempt)

Woodpeckers Pocket Compass Set [Preowned, Unused, SOLD]

Woodpeckers Pocket Compass Set [Preowned, Unused, SOLD]

Sold

£90.00 inc VAT

Woodpeckers Pocket T Square - TS-75 [Preowned]

Pre-owned TS-75 metric Saddle T - Square made in the USA. Little used in G++ condition..(available new elsewhere in the UK for about £75) Edge markings to 90mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical...

£55.00 (VAT exempt)

Woodpeckers Precision Straight Edge SERX - 24'' [Preowned, SOLD]

Woodpeckers Precision Straight Edge SERX - 24'' [Preowned, SOLD]

This is a pre-owned Imperial 24" straight edge with bevelled graduated edge (1/32") Super useful for setting up your jointer or table saw. Crazy accuracy with .003" tolerance. The base edge has two edges for increased stability. Machined from aircraft grade aluminium and anodised for protection and appearance. We do not believe this straight edge has ever been used.

£72.00 inc VAT

Woodpeckers Saddle Square - TS150 [Preowned, SOLD]

Woodpeckers Saddle Square - TS150 [Preowned, SOLD]

Edge markings to 170mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil (see our excellent Pentel Graphgear pencils) . Laying down a line parallel to the edge of your stock is as simple as finding the hole...

£60.00 (VAT exempt)

Woodpeckers Saddle Square - TS200 [Preowned, SOLD]

Woodpeckers Saddle Square - TS200 [Preowned, SOLD]

Pre-owned TS-200 metric Saddle T -square made in the USA. Little used in G++ condition.. Edge markings to 220mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil (see our excellent Pentel Graphgear pencils)...

£72.00 (VAT exempt)

Woodpeckers Saddle Square T-100 [Preowned, SOLD]

Woodpeckers Saddle Square T-100 [Preowned, SOLD]

Pre-owned 100mm T-square made in the USA. Very minor cosmetic blemishes. Edge markings to 120mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil (see our excellent Pentel Graphgear pencils) . Laying...

Was £54.00 Now £48.00 inc VAT

Woodpeckers Saddle T-150 [Preowned, Unused, SOLD]

Woodpeckers Saddle T-150 [Preowned, Unused, SOLD]

Pre-owned T-150 metric square made in the USA. Unused, as new. Edge markings to 170mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil (see our excellent Pentel Graphgear pencils) . Laying down a line...

Was £66.00 Now £60.00 inc VAT

Woodpeckers Saddle T-200 [Preowned, Unused]

Pre-owned T-200 metric square made in the USA. Unused, as new. Currently selling new elesewhere on the web for over £100 Edge markings to 220mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil...

£75.00 inc VAT

Woodpeckers Saddle T-300 [Preowned, Unused, SOLD]

Woodpeckers Saddle T-300 [Preowned, Unused, SOLD]

Pre-owned T-300 metric square made in the USA. Unused, as new. Edge markings to 320mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil (see our excellent Pentel Graphgear pencils) . Laying down a line...

£84.00 inc VAT

Woodpeckers T-Square Metric 600mm [Preowned, SOLD]

Woodpeckers T-Square Metric 600mm [Preowned, SOLD]

This is pre-owned in good condition. The classic bright red finish has faded which is a well documented feature affecting some Woodpecker tools over time. This square is 10+ years old but has seen little use. The anodizing process to coat the aluminium surface can be inconsistent between batches, some tools may fade over time, most do not it seems. However if you want a red colour match to mirror your...

£114.00 (VAT exempt)

Recently viewed

Classic Hand Tools

Customer Service

Friday Finds

Category

Price

Additional Filters

Sort By

Per Page

View

Recently viewed