Sort By
Per Page
View
Grid
List
Pegas Coping Regular/Skip 6.5' Blades
For use in hand frames that require pinned end blades. These Pegas scroll saw blades are compatible for use in coping saws. Good for hard and soft wood up to 3/4" thick. Finish is medium to smooth depending on tpi selected.
6.5" (165mm) in length and supplied in packs of 6.
Descriptions below are:
Coping Skip 6.5" (Thickness in inches x Width in inches x TPI)
For example...
Brusso Brass Offset Pivot Hinge L-39
The Brusso L-39 brass offset pivot hinge is employed when a minimum of visible hardware is desired, or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. The leaf measures 1¾" x 3/8" x 1/8". The L-39 has a longer knuckle for wide throw conditions.
Length: 1.750" - 1¾" - 44mm
Width:...
Robert Sorby ProEdge Trizact Belts
Perhaps the most popular in the range of belts. This robust material is designed to handle the demands of all steels. Not strictly 'grit sizes' these belts are built using brick and pyramid abrasive shaping.
The highest 3000 'grit' size will sharpen to two microns (the same sharpness as a disposable razor blade) and provide a factory finish on all steels.
Pfeil Series 1S - Double Bevel Skew Chisel
These are double bevelled skew chisels. The edge is slightly skewed for easy cutting action; often used without a mallet. Removes neat shavings. Double bevel – so the chisel can be used with the skew to the right or left. Useful for carving lettering and ornamental forms.
Hock Violin Knife Blades
Three sizes of knife blade as suggested by the late master violin-maker, Hans Weisshaar. These knives are double beveled. Sold as blades only, no handles.
High carbon steel.
Henry Taylor Bevel Edge Chisels
Henry Taylor standard bevel edge chisels. The blade length is approx 5" (125mm) with stained hardwood handles and brass ferrules.
Made in Sheffield, England for over 150 years.
F55 - 1/4" (6mm)
F56 - 3/8" (9mm)
F57 - 1/2" (12mm)
F59 - 3/4" (19mm)
F60 - 1" (25mm)
New Veritas Micro-Adjust Wheel Marking Gauge
Veritas have refined and redesigned their ever popular wheel marking gauges. This new micro-adjust wheel marking gauge draws on two decades of manufacturing experience, with subtle improvements across the board.
The adjustment mechanism built into the stainless-steel rod is intuitive to use. After setting the approximate projection, you can fine-tune the position of the cutter within a range of...
Pfeil Violin Maker's Knives
Pfeil Violin Maker's Knives are easy to resharpen because the special steel is hardened all the way through. These have a double bevel.
Ray Iles 8'' Mike Abbott Pattern Draw Knife
This drawknife designed by Mike Abbott and manufactured by Ray Iles has a 8" cutting edge, with beech handles. This 8" drawing knife has slightly flared handles which are bent backwards, meaning the handles are at approximately the same angle, whether you are using them back down, or cannel down.
Made in England
Worked: A Bench Guide to Hand-Tool Efficiency
By: Joshua A. Klein
There is a gap in most woodworking instruction. Somewhere in between tool descriptions (what they are and what they do) and step-by-step project tutorials, we are missing something vital. We may understand what a backsaw is, or what a hatchet is capable of… but how do we actually do it? How do we engage the wood with these tools? And how do we confidently proceed through...
Nakaya Kataba Gold & Meiko Gold Saw
The Kataba - single edge cross cut saw with no back or metal spine allowing you to make deeper cuts.
Kataba Gold 240 - 240mm blade - 0.4mm thick, spacing 1mm setting 0.45mm WKG240
Kataba Meiko Gold 250 - 250mm blade - 0.5mm thick WKG250M - This is a very clever saw combining x-cut and rip teeth on one edge of a 0.5mm thick blade.
Flexcut Slip Strop PW12
The Flexcut SlipStrop™ is an economical way for maintaining a tools razor edge. It has been specially moulded to allow for polishing and deburring the hard to reach areas on the inside of V-tools and gouges as well as the outside edge bevel. Either side of the strop can be used.
Each SlipStrop includes a mini-bar of Flexcut Gold polishing compound and detailed instructions.
Brusso Brass Offset Pivot Hinge L-37
The Brusso L-37 brass offset pivot hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. The leaf measures 1¾" x 3/8" x 1/8".
Length: 1.750" - 1¾" - 44mm
Width: 0.375" - 3/8" - 9mm
Leaf Thickness: 0.125"...
Veritas Marking Gauge Replacement Wheel
Replacement wheel for Veritas gauges. Not suitable for the new style micro-adjust marking gauge.
Robert Sorby Leather Edge Guards
We highly recommend edge guards to protect yourself and your tools.
The chisel guards are available in 1", 1½" and 2" sizes, these tough leather guards are a snug fit for both the 285 and 286 framing chisels.
The slick guards are available in 60mm and 85mm sizes suitable for the 289 framer's slicks.
Veritas Router Plane
Veritas Router Plane
Gransfors Bruk Ceramic Axe Stone
Gränsfors Bruk ceramic grinding stone is made up of ceramic abrasives. It has a coarse side with grain size 180 to deal with rough damages and a fine side with grain size 600 suitable for fine grinding and sharpening.
The stone is normally used with water, but can also be used dry. The stone is round and flat with a phase around the edges to prevent chipping. The fine side is 2/3 of the total...
Set & File: A Practical Guide to Saw Sharpening
by Matt Cianci
In "Set & File," Matt Cianci (aka The Saw Wright) teaches you the fundamentals of maintaining backsaws and handsaws: how to file and joint your saws with the correct rake, fleam and pitch to keep them cutting sharp. You'll also learn how to deal with saw teeth that are in good shape but dull, plus how to successfully doctor teeth that have been abused.
Plus, Matt...
Pfeil Long Bent Gouges Series 8L
For shaping recesses and working in corners.
Paul Adamson recommends the 25mm tool for making a Kuksa, his book can be viewed here
Brusso Brass Shelf Pin K-10
The K-10 brass shelf support pin comprises a decorative turned support and a cylindrical peg, which fits into the K-2 sleeve. The peg measures 1/4" in diameter x 3/8" deep, and the support projects 7/16". Supplied as a set of 4.
Veritas Template Groove Cutter, Inlay Chisel and Pin Awl
With slender handles for pencil-like control, these Veritas tools are useful for freehand inlay work and following templates. They are also good complements to the Veritas inlay groove and slicing tool since the groove and chisel tools can be used to clean up, deepen or terminate grooves without widening them.
The Veritas template groove cutter is available in 0.025", 0.032" and 0.040"...
Lime
This lime is sourced for us from a Sawmill in Yorkshire. It is British lime wood (also known as basswood or linden)
A favourite with woodcarvers because it is one of the easiest woods to carve with consistent grain and very few knots.
Pale yellow - white.
Kiln dried.
Lime wood is soft and crisp, making it ideal for intricate carving and working with hand tools. Its close grain structure...
Norton Manmade Oilstones
Please note that these stones measure 8" (200mm) x 3" (75mm) x 1/2" (13mm) and are supplied in a plastic storage box.
These are Norton India oil stones (aluminium oxide) are great for imparting durable, smooth cutting edges and for close tolerances.
Coarse India - Use to sharpen dull edges quickly.
Medium India - Medium cutting rate man-made sharpening stone to achieve a medium/fine...
Veritas Power Tenon Cutters
Veritas Power Tenon Cutters as recommended to us by Jon Warnes. Jon has taught rustic woodcraft for many years so his recommendation is most valuable.
This what the manufacturers say...
These tools are indispensable for making rustic furniture, producing clean round tenons with smoothly radiused shoulders on the ends of sticks, branches, or more formal stock if you wish. With typical Veritas...
Veritas Dovetail Saw
When we first saw this saw (!) we were a bit dubious but it has quickly grown on us. It is very comfortable. it is very affordable, it cuts well and can be re-sharpened. Not for the purists maybe but beauty is in the eye of the beholder. This is what those clever chaps from Veritas say about this saw....
The Veritas dovetail saw is an innovative blend of tradition and technology. It incorporates...
Lie-Nielsen No.5 1/2 Jack Plane
A Lie-Nielsen No.5 1/2 Jack Plane. Probably the most popular bench plane, and the one that many woodwork teachers recommend starting out with due to its versatility.
The equivalent of a later type Stanley Bedrock No.605½.
14-3/4" (375mm) long.
2-3/8" (60mm) wide blade. A2 steel.
Iron body, 7lbs (3.15kg).
Veritas Shaft Clamp for Dual Marking Gauge
On occasions, it may an advantage to lock the relative position of the two rods on the Veritas® Dual Marking Gauge, such as when a project requires a constant mortise size, but different offsets. The shaft clamp lets you lock the relative position of the cutters while still being able to adjust the fence for offset. This allows you to preserve identical mortise or tenon sizing when joining parts...
Pfeil Marking Knives
The Pfeil Marking Knife is bevelled on both edges. The blade can be guided on either the left or right side of a straight edge for precise scribing.
The handle is oiled Bubinga, and the blade is K720 steel, hardened to RC 61.
Standard: Blade length is 40mm. Overall length is 180mm.
Small: Blade length is 34mm. Overall length is 160mm.
Pax Cabinet Scraper Set (Shaped Set)
The Pax Cabinet Scraper Sets are a "must" for woodworkers. Made from stiff carbon steel (saw steel) these are used to scrape along wood to give a smooth finish to your projects. One of the simplest products that work wonders! .
The Shaped Set contains:
1 x Concave/Convex Scraper
1 x Gooseneck Scraper
1 x Double Curved Scraper
1 x 5" x 2 ½" Scraper
These are supplied...
Brusso Brass Offset Pivot Hinge L-93
The Brusso L-93 offset pivot hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. The leaf measures 2½" x 5/8" x 1/4".
Length: 2.500" - 2½" - 64mm
Width: 0.625" - 5/8" - 16mm
Leaf Thickness: 0.250"...
Autonet 150mm Discs
Experience superior sanding with Autonet 150mm discs, designed by Mirka, a leader in abrasives technology. Originally crafted for the automotive industry, these discs feature a patented material with thousands of tiny holes, ensuring efficient dust extraction and a cleaner workspace.
Key Features:
Virtually Dust-Free: Enhanced dust removal for a better work environment.
Long-Lasting: Retains...
Liquid Ink 200ml - Black
For Sumitsubo and Sumisashi, it is water soluble.
James Barry Lapping Fluid
Specially designed fluid for use with diamond abrasives
Lapping fluid specially designed fluid for use with diamond abrasives, used in the engineering industry for over 35 years. This is the original lapping fluid as introduced to the market by James Barry Sharpening Solutions 12 years ago. Oils that are sometimes used in sharpening are too thick for diamond sharpening and result in the tools skating...
Pfeil Fishtail Gouges Series 5F
Fishtail chisels are tools that easily reach difficult areas as the cutting edge is wider than the shaft.
Blades are thin and light.
Pfeil Medium Sized Tools - V Tools
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
The D12 (60°) V Tool: 2mm, 4mm, 6mm and 8mm.
The D14 (55°) Soft V Tool is 6mm wide.
The D15 (45°) V Tool is 3mm wide.
Kirjes Bowl Sander - 40 x 40mm Replacement Bulb
This is the replacement bulb for the Kirjes Bowl Sander.
Pfeil Series 1e - Single Bevel Chisel
These are straight chisels with a single bevel. Like Series 1 chisels, these chisels are used to carve the blank into rough form and to work on large areas. Single bevel. The choice of single or double bevel is largely a matter of preference.
Lee Valley Winding Sticks
Winding sticks are not new; woodworkers have been making them for years from scrap wood and using them to check the flatness of material. Placed at opposite ends of a board, they accentuate any twist (wind), making it easier to identify and correct. With the sticks in place, sight across their top edges. If the edges are parallel, the board is not twisted. Reposition and repeat to check the entire...
Joined: A Bench Guide to Furniture Joinery
By: Joshua A. Klein
Many woodworking how-to books have a distinctly clinical feel to them, taking a formulaic approach (complete with exploded computer-drafted imagery) to describe a woodworking process from start to finish. This method works well for conveying precise measurements and details for replicating a specific piece of furniture, but falls short when it comes to capturing the whole point...
Auriou Modellers Rasps
These are the Right Handed versions, to see the Left Handed please CLICK HERE.
he Auriou Modellers Rasps are precision tools designed for detailed shaping work, particularly in tight spaces. These rasps are narrower than cabinet rasps, making them ideal for more delicate tasks. The rasps are available in various lengths and grains, tailored for different levels of refinement:
6" (150mm)...
Lie-Nielsen Screwdrivers with Cherry Handles
These Lie-Nielsen screwdrivers are made to fit specific screws on Lie Nielsen tools. They may be useful for other jobs as well. Modelled after gunsmith's screwdrivers with machined tips, they are correctly sized to fit the screw slots, giving you good power and control without slipping. The Chipbreaker and frog adjustment screwdriver are particularly useful.
The blades are hardened 416 Stainless...
Shinwa Sliding Bevel 250mm
Shinwa Sliding Bevels are ideal for marking out any angle. This one is 250mm (10") we also stock a 200mm (8") one.
Can be adjusted to any angle and is lightweight.
Fixing screw is on the end, therefore is never in the way.
Aluminium Handle
Stainless Steel Blade
Connells 12 Pocket Leather Tool Roll
The Connell Leather Chisel Roll has 12 pockets, with top and tail design for better protection.
Will accept chisels up to 275mm (11') long.
Rolls up neatly for easier storage.
Made from soft moss backed leather for durability
Pockets reinforced with brass rivets. Ties for secure fastening.
The Robin Wood Carving Axe
A razor sharp axe from Wood Tools that will do anything from felling small trees to splitting firewood, where it really excels is as a carving axe.
The weight of the head is 550g and the total weight around 720g (1lb 11oz), handle length is 12.5" (31cm). This is a great mid weight carving axe that most people will use easily without getting tired, yet still heavy enough to remove wood quickly.
A...
Veritas Shooting Plane + PM-V11 Blade
The mass of this Veritas Shooting Plane, its long base and low centre of gravity make it both stable and effective. Tipping the scales at just over 3.5kg and just under 400mm long, it is a substantial plane; you will appreciate the authority it provides when shooting.
The body is fully stress-relieved, ductile cast iron, with a sole and running surface machined flat and square to one another;...
DMT Diamond Dia-Sharp 8'' Bench Stone - 3 Stone Deal
The surface of this plate has continuous diamond abrasive bonded to it (not polka dot pattern)
The 8" version of this bench stone is the most popular Dia-Sharp® size. It's large enough to handle almost any tool or knife and is offered by us in 7 grits. Guaranteed not to hollow or groove, DMT®'s precisely engineered Dia-Sharp® Bench Stone with continuous diamond surface assures...
Brusso Brass Side Rail Hinge SR-638
The Brusso SR-638 brass square knuckled full mortice side rail hinge is engineered with a built-in stop that allows a lid to remain open at a 95° angle. These hinges are milled from 1/4" thick solid brass stock to precise dimensions and are designed to last a lifetime. They feature stainless steel hinge pins and the standard Brusso burnished finish. The leaf measures 5/16" wide x 1-3/8"...