Sort By
Per Page
View
Grid
List
Ashley Iles MKII Bench Chisels
These Ashley Iles MKII bench chisels are so attractively priced - how do they do it? These MKII chisels are a great improvement upon the original MKI's.
Hardened O1 high carbon steel with slim tapered blades which gives you access to tight spaces. The backs are also ever so slightly concave (a few thousands of an inch!) This is designed to help with sharpening.
Newtonia handles with brass...
Blue Spruce Optima Bench Chisels - Individual
Blue Spruce Toolworks new Optima Chisels feature a lapped and polished back with a flatness measured in light bands (the same system used to measure silicon wafers). When you unbox your new Optima Chisels, they’re razor sharp and 100% ready to go to work.
Each Optima Chisel is machined from A2 tool steel, then double-tempered and cryogenically treated. The tempering and cryo treatments result...
Lie-Nielsen A2 Bevel Edge Chisels
Lie-Nielsen A2 bevel edge chisels - these will hold their edge longer than high carbon chisels and therefore require less frequent sharpening.
The chisel edges are square, parallel along the length, and very narrow so you can get into tight places. The backs are ground flat and finished by hand at 400 grit. The bevel is flat ground at 30°, but a higher secondary bevel (about 35°) is advisable,...
Narex Richter Bevel Edge Chisels
Until recently we stocked the Narex 8116 range of bevel edge chisels which were popular amongst students and people starting out in woodworking. Most importantly the steel in the 8116 range was very good but in our opinion the balance and feel would sometimes let them down. I'm glad to say that this new premium range 8150 from Narex is a massive improvement upon the old chisels. Yes they are not...
Veritas PM-V11 Bench Chisels
Precision made in Veritas' own machine shop, these bench chisels are milled from PM-V11 steel (Rc61-63), an innovative proprietary alloy. This metal's micro-structure makes it extremely durable, so it can withstand the impact of heavy chopping cuts without chipping or deforming as readily as other tool steels, even at bevel angles as low as 20°. Highly wear resistant, the edge typically...
Pfeil Carpenter Chisels
Introduced in 2010 from Switzerland, Pfeil Carpenters Chisels have strong Elm wood octagonal handles with an oval section. We prefer these to the bench chisels.
The blades are forged from K 510 steel, hardened up to 60 RC. Bevel edged with well marked facets. The blades are finely ground and polished.
Bevel angle 25°, razor sharp.
4mm wide to 40mm wide.
Overall length 240-260mm.
.png "Last Ones!")
Robert Sorby Gilt Edge Chisels - Rosewood
Gilt Edge chisel with rosewood carver handle. Fitted with a tapered brass ferrule for comfort and elegance.
These are being discontinued due to the difficulties of obtaining the rosewood.
Robert Sorby Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge chisel with boxwood carver handle. Fitted with a tapered brass ferrule for comfort and elegance.
Robert Sorby Octagonal Handled Bevel Edged Chisel
Octagonal boxwood handle with brass ferule and leather washer.
Overall Size 265 - 340mm
Blade Length 127 - 178mm
Robert Sorby Traditional Bevel Edged Chisel
Traditional "carver" style boxwood handle with brass ferule and leather washer.
Overall Size 265 - 340mm
Blade Length 127-178mm
Lie-Nielsen Set of 5 Bevel Edge Chisels
The ever popular Lie-Nielsen A2 bevel edge chisels as a set. The most popular 5 sizes are included -
1/4", 3/8", 1/2", 3/4", 1".
This does not include a tool roll.
Blue Spruce Optima Bench Chisels - Set of 4
Blue Spruce Toolworks new Optima Chisels feature a lapped and polished back with a flatness measured in light bands (the same system used to measure silicon wafers). When you unbox your new Optima Chisels, they’re razor sharp and 100% ready to go to work.
Each Optima Chisel is machined from A2 tool steel, then double-tempered and cryogenically treated. The tempering and cryo treatments result...
Blue Spruce Optima Bench Chisels - Set of 6
Blue Spruce Toolworks new Optima Chisels feature a lapped and polished back with a flatness measured in light bands (the same system used to measure silicon wafers). When you unbox your new Optima Chisels, they’re razor sharp and 100% ready to go to work.
Each Optima Chisel is machined from A2 tool steel, then double-tempered and cryogenically treated. The tempering and cryo treatments result...
Blue Spruce Optima Bench Chisels - Set of 9
Blue Spruce Toolworks new Optima Chisels feature a lapped and polished back with a flatness measured in light bands (the same system used to measure silicon wafers). When you unbox your new Optima Chisels, they’re razor sharp and 100% ready to go to work.
Each Optima Chisel is machined from A2 tool steel, then double-tempered and cryogenically treated. The tempering and cryo treatments result...
Henry Taylor Bevel Edge Chisels
Henry Taylor standard bevel edge chisels. The blade length is approx 5" (125mm) with stained hardwood handles and brass ferrules.
Made in Sheffield, England for over 150 years.
F55 - 1/4" (6mm)
F56 - 3/8" (9mm)
F57 - 1/2" (12mm)
F59 - 3/4" (19mm)
F60 - 1" (25mm)
Oire Nomi Suminagashi Japanese Chisel
The Oire Nomi Suminagashi Japanese Chisel is a premium tool for precision woodworking, crafted using traditional Japanese techniques. This chisel is perfect for detailed carving and joinery, offering superior sharpness and durability.
Length: 220mm (60mm blade)
Widths: 6mm, 9mm, 12mm, 18mm, 24mm, and 30mm
Blade: Made from Suminagashi steel, known for its layered construction and strength.
Design:...
Pfeil Carpenter Chisel Sets
Introduced in 2010 from Switzerland, Pfeil Carpenters Chisels have strong Elm wood octagonal handles with an oval section. We prefer these to the bench chisels.
The blades are forged from K 510 steel, hardened up to 60 RC. Bevel edged with well marked facets. The blades are finely ground and polished.
Bevel angle 25°, razor sharp.
4mm wide to 40mm wide.
Overall length 240-260mm.
The...
Pfeil Bench Chisel Set
Set of 6 Pfeil Bench chisels in a beechwood case.
Widths included are 6mm, 10mm, 12mm, 16mm, 20mm and 26mm.
Robert Sorby Set of 5 Octagonal Handled Bevel Edged Chisels
Robert Sorby Set of 5 Octagonal boxwood handled Bevel Edge Chisels with brass ferule and leather washer in a cardboard presentation box.
Includes 1/4'', 3/8'', 1/2'', 3/4'' and 1'' chisels
Overall Size 265 - 340mm
Blade Length 127 - 178mm
Robert Sorby Boxed Set of 5 Traditional Bevel Edged Chisels
Set of 5 Robert Sorby Traditional "carver" style chisels with boxwood handle, brass ferule and leather washer in a cardboard presentation box.
Includes 1/4'', 3/8'', 1/2'', 3/4'' and 1'' chisels
Overall Size 265 - 340mm
Blade Length 127-178mm
Robert Sorby Set of 5 Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge chisel with boxwood carver handle.
This set of 5 comes in a cardboard presentation box and includes the following sizes: 1/4'', 3/8'', 1/2'', 3/4'' and 1''
Fitted with a tapered brass ferrule for comfort and elegance.
Henry Taylor Short Cranked Bevel Edged Chisels Set of 4
These Henry Taylor shorter 4½" blades are easier to control than the standard longer models. Their offset handle design keeps the blades perfectly flat on the workpiece and your hands out of the way, improving cutting accuracy and making work in confined spaces much easier.
Henry Taylor Bevel Edge Chisels Set of 5
Henry Taylor standard bevel edge chisels. The blade length is approx 5" (125mm) with stained hardwood handles with brass ferrules.
Made in Sheffield, England for over 150 years.
F55 - 1/4" (6mm)
F56 - 3/8" (9mm)
F57 - 1/2" (12mm)
F59 - 3/4" (19mm)
F60 - 1" (25mm)
As recommended by Simon Frost in September 2021 issue of The Woodworker.
Supplied with a...
Henry Taylor Short Cranked Bevel Edged Chisels
These Henry Taylor shorter 4½" blades are easier to control than the standard longer models. Their offset handle design keeps the blades perfectly flat on the workpiece and your hands out of the way, improving cutting accuracy and making work in confined spaces much easier.
Lie-Nielsen 1 1/2'' (38mm) Bevel Edge Socket Chisel
Lie-Nielsen have gone big! After many years of it being discussed we have 1-1/2'' version of their beloved chisels.
The Lie-Nielsen Chisels are based on the Stanley 750 Bevel Edge Socket Chisels. Socket chisels are not common these days, perhaps because they are expensive to make, but Stanley and others once produced these chisels in a vast array. Socket chisel handles are less likely to...