Sort By
Per Page
View
Grid
List
5 1/2'' Post for Veritas Bench Hold Down
This 5 1/2" Post is for the Veritas Bench Hold Down, for holes where through travel is limited.
At just 5-1/2" long, it provides about 4" of clamping capacity.
Patented.
Accesories for Veritas Dowel & Tenon Cutters
Use the 1/2" drive socket for the 3/8" & 7/16" sizes.
The 5/8" drive socket for the 1/2" dowel.
The four-sided square sockets have a 3/8" square-drive end. The socket adaptor has a 1/4" hex shank.
Dowel Cutters made in Canada. Patented.
Accessories for the Veritas Wood Carver's Vice
Accessories for the Veritas Wood Carver's Vice:
Dog Hole Mount Assembly:
The vice can be side or top mounted through any standard 3/4" dia. dog hole using the auxiliary rod/sleeve/wing-nut assembly, usable on benches from 5/8" to 4" thick.
3 1/2" Mounting Plate:
3-1/2" dia. by 1/2" thick mounting plate with a steel rod.
2" Mounting Plate:
For mounting smaller pieces, such as duck heads or bird...
Blade for the Veritas Small Scraping Plane
Replacement blade for the Veritas Small Scraping Plane 05P2950.
Blade for Veritas Flat & Round Spokeshaves
Replacement PM-V11 blade to fit both the Veritas Flat (05P3373) and Round (05P3374) Spokeshaves.
Blade for Veritas Low-Angle Spokeshave
Replacement PM-V11 blade to the Veritas Low-Angle Spokeshave (05P3273).
Blade for Veritas Skew Rebate Plane
Replacement PM-V11 blade to fit the right hand Veritas Skew Rebate.
Blades for the Veritas Detail Palm Planes
Replacement blades for the Veritas detail palm planes. (Convex and double-convex planes use the same blade.)
Both Veritas Dovetail Saw and Magnetic Guide
Hand-cut dovetails remain the mark of the skilled cabinetmaker and a feature that buyers look for in high-end furniture. Veritas has developed a guide and saw system that lets amateurs achieve professional results. The system also allows the seasoned expert to produce dovetail joints more quickly and with less effort.
The Veritas Magnetic Dovetail 1:8 Guide, clamps in position and holds the saw...
Cutters for the Lee Valley Cast Scratch Stock
These cutters are for the Lee Valley Cast Scratch Stock.
Made in Canada.
Lee Valley 3/4'' Dog Hole Bushings
These 3/4'' hardened steel bushings help you make an accurate dog-hole drilling guide using any 1 1/2'' thick board.
Knurling on the bushing provides a mechanical lock when installed in an appropriately sized hole (1'' for the 3/4'' bushing), and a projecting rim ensures that it rests perpendicular to the jig's surface.
Made in Canada.
Lee Valley Winding Sticks
Winding sticks are not new; woodworkers have been making them for years from scrap wood and using them to check the flatness of material. Placed at opposite ends of a board, they accentuate any twist (wind), making it easier to identify and correct. With the sticks in place, sight across their top edges. If the edges are parallel, the board is not twisted. Reposition and repeat to check the entire...
Long Rod for Veritas Skew Block Plane
This optional 3 1/2" stainless-steel fence rod is 1 1/8" longer than the 2 3/8" rod supplied with the Veritas skew block plane to let you add a thicker fence extension (e.g., a tapered spacer for angled cuts) without restricting cutting width.
Made in Canada.
Long Rods for Veritas Skew Rabbet
Double guide rods and a special collet locking system prevent the fence from racking, and the large brass knobs allow fast and easy adjustments without tools. The fence can be positioned to allow a maximum rabbet width of 1½".
Prices include VAT
Muzzles for Veritas Bench Dogs & Pups
For clamping a finished piece without marking it, the slip-resistant muzzles slide over the Bench Dogs (or Bench Pups) to give you a non-marring surface. They have a hard, spring-grip, plastic body with six face ribs.
Available in two sizes: 1¼" long for Bench Dogs or 3/4" long for Bench Pups. Sold in pairs.
New Veritas Micro-Adjust Wheel Marking Gauge
Veritas have refined and redesigned their ever popular wheel marking gauges. This new micro-adjust wheel marking gauge draws on two decades of manufacturing experience, with subtle improvements across the board.
The adjustment mechanism built into the stainless-steel rod is intuitive to use. After setting the approximate projection, you can fine-tune the position of the cutter within a range of...
Optional Depth Stop for Veritas Skew Block Plane
For use with the skew block plane, this depth stop lets you finish cuts at a precise depth.
The cast zinc-aluminum alloy arm is held in place by the front knob. The steel shoe is adjustable from flush to a maximum depth of 5/8" and has relieved edges to avoid marking your work.
Made in Canada.
Pair of Mounting Knobs for Veritas Universal Variable Angle Fence
A pair of stainless-steel knobs for mounting the Veritas universal variable angle plane fence to the bevel-up jointer, jack rabbet and shooting planes.
Made in Canada.
Parts and Accessories for Veritas String Inlay Tool System
Used much like a marking gauge, this inlay tool lets you accurately cut narrow grooves in a workpiece as well as neatly slice fine strings from a sheet of veneer. Its interchangeable blade system lets you quickly swap blades to suit the activity.
The hook-shaped blade is designed to cut grooves. Used in a sweeping push-pull motion, it has outlining spurs on one side of the blade to score the groove...
Pencil Tip & 10 Leads for Veritas Trammel Points
This pencil tip can replace either of the stainless-steel tips on the Veritas trammel points or the Veritas beam compass. It holds an included 2mm thick, 25mm long HB lead that marks a dark line and holds a bevel edge well. Ten additional pencil leads are included.
Made of durable and corrosion-resistant stainless steel with knurled sections to make them easy to remove. Pencil tips measure about...
Replacement Blade for Veritas Cabinetmakers Trimming Plane
Replacement lapped O1 steel blade for the Veritas Cabinetmaker's Trimming Plane. Hardened to Rc58-60.
Made in Canada.
Replacement Blade for Veritas Power Tenon Cutters
This replacement blade is for Veritas Power Tenon Cutters and it fits all sizes.
Replacement Blade for Veritas Scraper Shave
This high-carbon steel replacement blade is 0.040'' thick and hardened to Rc48-52, with a 45° cutting edge that can be readily burnished to create a long-lasting hook.
Made in Canada.
Replacement Blades for Veritas Chair Devils
These high-carbon steel replacement blades are for use with the Veritas Chair Devils. At 0.040'' thick, they are hardened to Rc48-52 and come with a finely ground 45° cutting edge.
Replacement Carbide Rods for Veritas Scraper Burnisher for Turners
Replacement 5° and 10° carbide rods for the Veritas Scraper Burnisher for Turners.
Replacement PM-V11 Blade for the Veritas Shop Knife
Made of PM-V11 tool steel , this replacement blade for the Veritas Shop Knife is 3/32" thick and about 3/8" wide with a 55° spear-point tip. Ground to a keen edge at a 25° bevel angle.
Replacement Tip for Veritas Japanese Style Awls
The replacement tip for the Veritas Japanese-Style Awls is A2 steel hardened to Rc60-62 for toughness.
Spare Blade for Veritas Edge-Trimming Plane
Replacement blade for the Veritas Edge-Trimming Plane. 1/8" thick, 1 1/4" wide replacement blades in PM-V11 steel work wood up to 1" wide.
Made in Canada.
Spare Blades for the Veritas Detail Rabbet Planes
The lapped replacement blades for the Veritas detail rabbet planes are made of O1 tool steel.
Spare Blades for the Veritas Scrub Plane
Available in high-carbon steel (Rc58-60) or PM-V11 steel (Rc61-63). The blade edge is ground with a 3" radius, so it takes an aggressive cut.
Spare PM-V11 Blade for Veritas Bullnose Shoulder Plane
Replacement PM-V11 blade for the Veritas bullnose shoulder plane are lapped, 1/8" (0.125") thick.
Spare PM-V11 Blade for Veritas Large Shoulder Plane
Replacement PM-V11 blade for the Veritas large shoulder plane are lapped, 1/8" (0.125") thick.
Spare PM-V11 Blade for Veritas Medium Shoulder Plane
Replacement PM-V11 blade for the Veritas medium shoulder plane are lapped, 1/8" (0.125") thick.
Spare PM-V11 Blade for Veritas Small Shoulder Plane
Ensure your Veritas Small Shoulder Plane continues to deliver exceptional results with this premium PM-V11 replacement blade. Known for its outstanding durability and ability to maintain a razor-sharp edge, the PM-V11 steel blade is the perfect upgrade for those who demand the highest performance from their tools.
Key Features:
Premium Material: Crafted from PM-V11 steel, known for its superior...
Table for 1 1/2'' Wheels for Veritas Grinder Tool Rest
This replacement table for the Veritas grinder tool rest has a wider slot to let you use it with 1 1/2" wide wheels (like 8" CBN wheels).
The 4" wide aluminum table has a 1 5/8" wide slot and installs easily in place of the standard table. It has the same horizontal slot and center hole for use with sliding and rotating jigs.
(For wheels narrower than 1 1/2", the standard...
Veritas 14° Dovetail Saddle Marker (1:4)
This new 14° marker is designed to approximate a 1:4 ratio, for those who prefer this angle when working in thinner stock, as it not only provides stronger material interlock than traditional ratio angles but produces a slightly exaggerated dovetail joint that many find attractive.
The long legs ensure accurate registration. Also, much like the Veritas saddle square they are based on, they allow...
Veritas 2 1/4'' Blades for Bevel-Up and Low-Angle Bench Planes
2 1/4" blades that fit the Veritas Bevel-Up Smoother, Low-Angle Jack, Bevel-Up Jointer. Also fits the Shooting Board Plane (25° bevel).
Veritas Box-Maker's Plough Plane
This tool has been missing for a very long time. It is based upon the Record 043 Plough Plane which was produced during the heydays of British manufacturing.
An ideal tool for making grooves in boxes and small drawers, this compact plough plane excels at precise grooving and beading applications on small workpieces.
5 1/2" (140mm) long cast-iron body and weighing just 1 lb 7 oz (650 grams),...
Veritas Chair Devils
Veritas Chair devils are wonderful tools for final shaping and smoothing of round parts such as chair spindles and posts. The specially shaped scraper blade rounds the workpiece, removing any spokeshave marks.
• Machined steel bodies fitted with hardwood handles
• Machined toe and two thumbscrews are solid brass
• High-carbon steel blades are 0.040'' thick, hardened...
Veritas Flushing Chisel Roll
Made of black cotton canvas, this chisel roll holds four Veritas flushing chisel blades and one handle.
Veritas Flushing Chisels
Veritas designed this flushing chisel based on a set of antique patternmakers’ chisels from their collection. More than just for flush trimming inlay or joinery, a flushing chisel allows you to work into corners and extend flat surfaces right up to adjacent surfaces where a plane blade cannot reach. One hand pushes the tool while your other hand guides the blade along the workpiece, giving you...
Veritas Hardware Kits for Wooden Spokeshaves
Traditional wooden spokeshaves are still popular tools, despite modern alternatives that offer better control over depth of cut.
Typical spokeshave blades have tangs that wedge into holes in the tool body. Cut depth is adjusted by tapping the tang ends or the base of the blade. Many users find ways to refine this haphazard process, but most require a screwdriver or other tool, or the blade must...
Veritas HSS Lipped Metric Brad-Point Drills
These come very high recommended, and Lee Valley consider them their best brad-point drills they've ever made.
Starting with a top-of-the-line American-made twist drill, they reshape and sharpen the tips on a state-of-the-art Swiss CNC grinder. Made from high-speed steel, the bits are not subject to burning, and stay sharp about 10 times as long as carbon steel bits.
The polished flutes give...
Veritas Imperial Rule for Sliding Square
These Imperial rules for the Veritas sliding squares are interchangeable.
Veritas Miniature Bench Vice
When you’re working on projects with the Veritas miniature tools, this appropriately sized front vise provides a means to hold them. At 7 9/16'' (192mm) long, 4 7/16'' (112mm) wide, 1 1/8'' (28mm) tall and just over 16 oz (453g), it matches the scale of the other miniature tools but is a robust vise in its own right. Built into a 1:3 scale bench or a tabletop work surface,...
Veritas Miniature Cabinetmaker's Trimming Plane
This fully functional 1:3-scale version of the Veritas cabinetmaker's trimming plane is a useful tool for reaching places a regular-size plane or chisel just won’t fit. Only 2 3/16'' (55mm) long, 5/8'' (16mm) wide and less than 1'' (25mm) in height, it excels at making precise paring cuts in tight spots, such as a box interior.
The 25° bevel blade and 15°...
Veritas Miniature Hold-Down
This 1:3 scale miniature version the Veritas hold-down can secure work vertically on small projects, such as when cleaning up dovetails or chopping mortises.
The low-profile 3'' cast steel arm is unobstructed at the clamping end, allowing good access to work from all sides. Simply turn the brass knob to apply the desired amount of clamping force. The 3'' post fits in a 17/64''...
Veritas Miniature Planing Stops
The Veritas miniature planing stop is designed to slip over a pair of miniature surface dogs (sold separately) to provide a reliable registration surface when working on thin or narrow workpieces, allowing materials to be worked without obstruction.
For tasks that involve the application of horizontal force in one direction, such as planing, a single stop can be used with no additional clamping....