Sort By
Per Page
View
Grid
List
Barr Hand Adze
The Barr Hand Adze is the best choice for roughing out your bowls and chair seats. Designed for maximum control the 2¼" cutting edge is just enough for the task at hand. Not too light, not too heavy it is the perfect addition to your workshop!
2¼" cutting edge, head length 8", total weight 2lbs, handle length 15"
Bad Axe Frame Saw and Kerfing Plane Hardware Kit (no wood)
What's included.....
30 1/2" Saw Plate and 10" Kerfing Plane Plate. Blue Tempered 1095 Spring Steel. Hammer-set and sharpened by hand.
Two brackets (with kerf pre-cut), one of which is tapped for the 3/8" eye bolt.
3" x 3/8" eyebolt with jam nut.
Striker Plate with fastening screws.
Two U-bolts to secure plate to brackets.
''All you have to do is cut and form the wooden components.''
Barr Bench Chisels
The bench chisel has the same quality construction as their popular framing chisels, but with a shorter blade length.
The chisels are all 13" (325mm) long overall.
Available as 1" (25mm), 1½" (38mm), 2" (50mm) or as a set of 3 Bench Chisels.
Crucible Lump Hammer
The Crucible lump hammer has a 2.2lb. hardened steel head and is ideal for assembly, mortising, setting holdfasts and dozens of other chores. Comfortable octagonal hickory handle with a waxed finish.
The late, great furniture maker Alan Peters often said that one of his favourite tools was his “lump hammer,” a British term for what Americans might call an engineer’s hammer or a small sledge....
Famag Lewis Auger Bits
Famag Lewis Auger Bits in two lengths.
Overall Length 235mm Spiral Length 160mm
Overall Length 460mm Spiral Length 380mm
A "Lewis" pattern consists of a main self tapping thread which pulls the bit through the cut and two cutting edges.
This version has a stepped head and is used for drilling deep holes in soft wood and European hard wood with power drill and joinery machines.
Due...
Gransfors Bruk Carpenter's Axe 465
These axes have a straight edge and thin blade with low angle of the bevel face, suited for work in dry wood. The forged inward curve from the heel to the lip of the head allows your hand to grip almost straight above the centre of the edge. This, and the long straight cutting edge, gives rigidity, stability, and control when cutting. Functions like a good heavy knife. The axe poll is ground and...
Gransfors Bruk Swedish Broad Axes
The pattern of the Gransfors Broad Axe and the handle is based on old Swedish logging techniques for squaring logs and structural timbers of all kinds. Has sufficient space between the "blade’s beard" and the handle for the user’s fingers. There are different options of bevels (double, left or right). You also have handle options of straight (so the blade is in line with the...
Gransfors Bruk Swedish Drawknife 486
This is a big beast and popular for quick removal of bark from logs and other large trimming work. The hickory handles are set on full-length tangs extending straight out from the ends of the blade. The blade is bowed up and curved forward in the centre for effective peeling, shaping and smoothing. The total length is 22½". The blade is 11½" in length and 1½" wide. It weighs 1lb. 5oz. The tool...
Gyokucho Razorsaw Seiun Saku Ryoba 300mm
Full Name : Gyokucho Razorsaw Seiun Saku Ryoba.
Blade Length : 300mm.
Overall Length : 695mm Rattan / 675mm TPE.
Max Cutting Depth : N/A.
Teeth Pitch / TPI : Crosscut 3.0mm / 8.5. Rip Cut 5.6-3.5mm / 4.5-7.3.
Blade Thickness : 0.7mm.
Cutting Width : 1.10mm.
Teeth Pattern : Crosscut & Rip Cut.
Gyokucho Product Number : 616 Rattan / 664 TPE.
Weight : 350g Rattan / 415g TPE.
Replacement...
Hide Mallet Size 10
The head is 89mm (3.5'') in diameter, the length is 140mm (5.5'') and it is made of hide (see below). The total length is approximately 255mm (14'') long and the handle is wooden.
Ideal for the jewellery trade, sheet metal work, die cutting industry and use on copper, brass and soft metals.
This hide mallet has been manufactured from genuine Water Buffalo hide tightly...
Lie-Nielsen 10 1/4 Rebate Bench Plane
Also known as a Carriage Maker’s or Jack Rebate Plane, this is the largest rabbet plane made. Based on the Stanley 10¼, which went out of production in the mid-1940s, we modified the design to fit the Bedrock format. Adjustable side nickers make clean, cross-grain cuts. Both handle and knob can tilt left or right to give better access and control in tight corners.
12-3/4" long.
Blade...
Lie-Nielsen No.073 Large Shoulder Plane
A versatile, general purpose Shoulder Plane with nice heft and the best size to start with. This all-metal Shoulder Plane is based on the Record 073, which in turn was based on a Preston model.
The Bronze lever cap is higher for better grip and closer to the blade bevel for better support. The mouth geometry allows for better chip clearance, while the adjustable mouth and locking screws are large...
Lie-Nielsen No.507 Rebating Block Plane
The Lie-Nielsen No 507 Rebating Block Plane is also described as a Lie-Nielsen 60½ Rebating Block Plane (60 1/2R).
This 12° angle rebate block plane is based on an old Sargent block plane (No 507). The plane body is made from unbreakable ductile iron and is ground flat and square to .001". The cap iron is polished bronze. The throat is non adjustable. It is 6¼" long...
Liquid Ink 200ml - Black
For Sumitsubo and Sumisashi, it is water soluble.
Oak-Framed Buildings
By Rupert Newman,
The author originally trained as a naval architect and shipwright moved on to oak timber framed construction for houses.
Full colour photographs show projects both complete and under construction. Indented for aspiring self-builders as well as established carpenters and builders. Structural details and three-dimensional drawings are included.
Chapters comprise:
Past...
Replacement Hide Face Size 2
This replacement hide face fits the Copper/Hide Hammer - Branded Head Size 2
Compressed Water Buffalo Hide for use with Malleable Iron heads.
Hide face absorbs the shock of the blow and transfers the force to the item being struck without fear of damage.
Ideal where a heavy blow is required combined with a relatively small striking area.
Ryoba Gold Saw
A double edged blade with X-cut & rip edges and traditional style handle.
A choice of 4 sizes
220mm blade - 0.4mm thick (spacing of teeth 1.3mm cross 2.0-3.4mm rip cut setting 0.7mm) WRG220
240mm blade - 0.5mm thick (spacing of teeth 1.6mm cross 2.7-3.9mm rip cut setting 0.75mm) WRG240 - This is our most popular size.
270mm blade - 0.6 mm thick (spacing of teeth 2.5mm crosscut, 3.3-5.8mm...
Thomas Flinn 3ft One Man X Cut Saw
One Man Crosscut - 3ft - Great Amercian Tooth.
These saws are equally popular in forestry work as they are at home cutting up smaller logs for firewood.
The Thomas Flinn 3ft One Man X Cut Saw has a clear finished beech handle and comes complete with an auxiliary handle which can be attached to the front of the blade so you can get some additional assistance with cutting if necessary. The handle...
Thomas Flinn Pax Hand Saws
Handcrafted of the finest alloy steel these saws are taper ground and breasted (meaning less teeth are in contact with the wood and therefore less friction) and are precisely set and sharpened by hand to ensure the best possible cut without binding. The handle is made from the finest steamed beech with a two-tone gloss finish.
With a variation of teeth sizes, there is a Handsaw for every type of...
Thomas Flinn Two Man X Cut Saw - 4ft
Two Man Crosscut Saw - Peg Tooth 4ft.
The teeth on the Thomas Flinn Two Man X Cut Saws work in a way that the teeth cut on the pull stroke on each side of the tooth and so actually cut in each pulling direction. Popular for crosscutting of logs in forestry and cutting up of firewood at home. This 4ft (122cm) version is designed for logs upto 2ft (61cm) in diameter.
Pair of Beech Handles and...
Veritas Jack Rebate Plane + PM-V11 Blade
This Veritas Jack Rebate plane cuts large-scale rebating down to size. The body is 385mm long and the blade extends the full width (57mm) of the body. It is suitable for very large rebates and fielded or bevelled panels. The long sole and substantial mass help ensure accuracy.
The 4.8mm thick bevel-up blade makes right or left-handed corner cuts cleanly and accurately. Adjustable scoring spurs...
Veritas Large Shoulder Plane + PM-V11 Blade
The Veritas® large shoulder plane (a specialized rabbet plane) is the latest and largest in our line of shoulder planes. Its size and mass make it perfect for trimming breadboard tenons, adjusting shoulders, or even paring down tenon cheeks. At 8¼" long, 1¼" wide and weighing 3¾ lb, it brings both authority and precision to larger work. The ductile cast iron body is accurately machined and ground...
Wood is Good Unbreakable Mallets
Wood is Good wood carving mallets from the USA.
These mallets are made with an American maple handle and a urethane head that is guaranteed to be unbreakable. They are designed to be quiet and yet able to transmit the maximum force to the tool.
The smaller sizes seem to be the most popular (with the 18oz the biggest seller) but the biggies also appeal to those of you doing larger scale work or...
Barr Fat Boy Slick
If you need a big slick for paring, this is the one! The curved edge skives into the material lessening the initial force needed to start your cut.
3½" cutting edge, 7½" blade length, 16" from edge to end of socket, length with handle 30".
Liquid Ink 200ml - Red
For Sumitsubo and Sumisashi, it is water soluble.
Barr Framing Chisels
Barr's framing chisels have become the first choice of professional timber framers and homebuilders. These chisels will take and hold a superior edge saving you time and giving you the best possible results. Hand forged from carbon steel with a flat back and socket handle, they are a must for mortise and tenon work.
The chisels are all 17½" (438mm) long overall.
Available as 1" (25mm), 1½" (38mm),...
Fisch Elite Black Auger Bit Set of 5
The Fisch sets of 5 auger bits are available in 2 lengths, 235mm and 320mm.
These German manufactured auger bits have an enviable reputation for superior quality.
Auger bits to satisfy demand from our discerning and growing customer base.
Fisch Elite Black auger bits have a corrosion resistant coating that results in lower friction when drilling. This means deeper, faster drilling.
For...
Barr Large Slick
This large slick will take on the toughest jobs with ease. They take and hold a fine edge without being brittle. The handle angles up away from your work surface to allow hand clearance. If you are fed up with poor quality slicks, try one of these. Like all Barr tools, your satisfaction is guaranteed or your money back.
2½" cutting edge, 7½" blade length, length from cutting edge to end of socket...
Fisch Elite Black Auger Bit Set of 6
Fisch sets of 6 Elite Black Auger Bits available in 2 lengths, 460mm and 650mm.
These German manufactured auger bits have an enviable reputation for superior quality.
Auger bits to satisfy demand from our discerning and growing customer base.
Fisch Elite Black auger bits have a corrosion resistant coating that results in lower friction when drilling. This means deeper, faster drilling.
For...
Barr Scarf Slick
Invaluable for cutting scarf joints on your timber projects, this slick is a favorite among log and timber smiths. It is also well-suited for cleaning up adzed timbers. Barr's scarf slick has a mild sweep with a curved edge and will give you a slight concave cut.
3½" cutting edge, 7½" blade length, 16" from edge to end of socket, length with handle 30".
Please note that this slick is not flat (by...
Fisch Elite Black Auger Bits
These German manufactured auger bits have an enviable reputation for superior quality.
Auger bits to satisfy demand from our discerning and growing customer base.
Fisch Elite Black auger bits have a corrosion resistant coating that results in lower friction when drilling. This means deeper, faster drilling.
For deep drilling in all soft, hard, exotic and moist woods
"Sharp-Grip"...
Shinwa Ink Line (Sumitsubo)
With a sealed ink reservoir to prevent ink from leaking out or drying up. Automatic spring-loaded recoil with locking mechanism. Unbreakable plastic body and thread bob.
No ink is included.
Body length 180 mm, thread length 20 m.
New design (shiny new colours!)
Barr Small Slick
Built with the same fine construction as the large slick, the small slick has a 5" blade length making it a little less hefty.
2½" cutting edge, 5½" blade length, length from cutting edge to end of socket 12", length with handle 26
Fisch Extension to Elite Black Auger Bit
Extensions for the Fisch Elite Black Auger Bits available in 2 diameters, 20mm and 26mm
Shinwa Ink Line (Sumitsubo) + Black Ink
With a sealed ink reservoir to prevent ink from leaking out or drying up. Automatic spring-loaded recoil with locking mechanism. Unbreakable plastic body and thread bob.
Includes 200ml black ink.
Body length 180 mm, thread length 20 m.
New design (shiny new colours!)
Fisch Adapter to Auger Bit
There are 3 different adapters for the Elite Black Augur Bits -
- Mafell
- MKII
- SDS
Henry Taylor Heavy Duty Socket Firmer Chisels
These Henry Taylor chisels have a thicker and longer socket than their bevel edge chisels. This gives them added strength and durability which makes them popular with timber framers.
The handle is made from Ash and has a heavy brass hoop. The handles are hard wearing but should you need to change a handle it is easy to do so with the socketed design. Replacement handles can be made or purchased.
Forged...
Shinwa Mini Ink Line
Professional quality, compact Sumitsubo.
Body 130 mm, line length 15 m.
No ink is included.
New design (shiny new colours!)
Henry Taylor Heavy Duty Socket Firmer Chisels Set of 4
These Henry Taylor chisels have a thicker and longer socket than their bevel edge chisels. This gives them added strength and durability which makes them popular with timber framers.
The handle is made from Ash and has a heavy brass hoop. The handles are hard wearing but should you need to change a handle it is easy to do so with the socketed design. Replacement handles can be made or purchased.
Forged...
Shinwa Mini Ink Line + Black Ink
Professional quality, compact Sumitsubo.
Body 130 mm, line length 15 m.
Includes 200ml black ink.
New design (shiny new colours!)
Star-M Long & Smooth Auger Bits
The Star-M Ultra Smooth Long Auger Bits - Metric are available in 2 lengths, 195mm and 457mm (specific details below)
CR-S - 12.55mm quick change shank
Overall length 195mm
Flute length 127mm
Shank length 68mm
Available in the following diameters: 13mm, 19mm, 25mm
CR-L - 12.55mm quick change shank.
Overall length 457mm
Flute length 381mm
Shank length 76mm
Available in the following...
Henry Taylor Registered Mortice Chisel
Made in Sheffield, England for over 150 years.
Blade about 5½" long.
F23 - 1/4" (6mm)
F24a - 3/8" (9mm)
F24 - 1/2" (12mm)
F25 - 3/4" (19mm)
F26 - 1" (25mm)
Henry Taylor Registered Mortice Chisel Set of 5
Made in Sheffield, England for over 150 years.
Blade about 5½" long.
F23 - 1/4" (6mm)
F24a - 3/8" (9mm)
F24 - 1/2" (12mm)
F25 - 3/4" (19mm)
F26 - 1" (25mm)
Veritas Transfer Log Scribe
Can be used with 2 pencils for double scribing and the hardened steel pin can be used on one leg for smooth scribing.
Fully adjustable from 0-300mm. Calibrated so that any opening can be used once the double bubbles are set for a given pencil & pin projection.
Curved pin tip has rounded end for smooth scribing and straight tip is sharp pointed for compass work.
Includes indelible pencil...
Henry Taylor Swan Neck Chisels
A Henry Taylor swan neck chisel is used to clean the bottom of mortices. The chisel is levered in use, not struck.
Available in 1/4", 5/16" and 3/8".
Holster for Robert Sorby Timber Framer's Slick
A quality riveted leather holster for safer carriage of the Robert Sorby Timber Framer's Slick.