Narex Dowel Plates
These new dowel plates from Narex are made from A2 steel hardened to 61 HRc. The holes are machined with a slight taper on the underside to create a relief on the bottom and sharp edges on top that shears off the corners.
The Metric Dowel Plate makes 4mm to 16mm dowels in mm increments.
The Imperial Dowel plate makes 1/8", 3/16", 1/4", 9/32'', 5/16", 3/8", 7/16'',...
Ray Iles Rounding Planes
A rounder is also known as rotary plane and is used to create accurate tenons or for rounding spindles for chairs. All of these 6 rounders are made by Ray Iles.
The thick blade is held in place by two washered screws which allows you to adjust or remove the blade for sharpening very easily.
Beech body, lightly linseed oiled.
Having reduced your spindle to a little over the size of the rounder...
Veritas Tapered Tenon Cutters
Veritas tapered tenon cutters will put tapered tenons on the tips of turnings, dowels or rustic furniture components to fit into tapered holes; for example, legs and spindles on a Windsor chair. Use the cutter like a hand-held pencil sharpener; you either rotate the workpiece while pressing it into the cutter body or you can rotate the tool on the workpiece. Works equally well in soft, green or hard...
Veritas Dowel & Tenon Cutters
Obtaining dowels to perfectly match a project or specific species of timber, is to say the least, almost impossible. Not so if you own a Veritas Dowel cutter and have a few timber off-cuts to hand. These cutters can be used two ways. Either use them like a hand-held pencil sharpener, to put accurate tenons on the tips of turnings or on rustic furniture components. Alternatively using a cordless drill,...
Accesories for Veritas Dowel & Tenon Cutters
Use the 1/2" drive socket for the 3/8" & 7/16" sizes.
The 5/8" drive socket for the 1/2" dowel.
The four-sided square sockets have a 3/8" square-drive end. The socket adaptor has a 1/4" hex shank.
Dowel Cutters made in Canada. Patented.
Curved Replacement Blade for Veritas Dowel & Tenon Cutters
The curved blade is a replacement blade for the Veritas Dowel and Tenon Cutters. It can also be used on the 3/8", 7/16" and 1/2" Veritas Tapered Tenon Cutters (not recommended for the larger sizes as overheating may occur).
Lie-Nielsen Dowel Plates
If you want to make exact-sized dowels from any wood you choose, a Lie-Nielsen Dowel Plate is the best tool.
It's also handy to get a precise tenon on chair spindles. The Lie Nielsen plates are 1/4" x 5-5/8" x 1½" surface ground A2 tool steel. The holes are machined with 6-degree clearance taper on the underside, the holes are straight for the first .025"; so this tool can be sharpened many times...
Veritas Power Tenon Cutters
Veritas Power Tenon Cutters as recommended to us by Jon Warnes. Jon has taught rustic woodcraft for many years so his recommendation is most valuable.
This what the manufacturers say...
These tools are indispensable for making rustic furniture, producing clean round tenons with smoothly radiused shoulders on the ends of sticks, branches, or more formal stock if you wish. With typical Veritas...
Replacement Blade for Veritas Power Tenon Cutters
This replacement blade is for Veritas Power Tenon Cutters and it fits all sizes.
Set of Rounding Planes by Ray Iles
A rounder is also known as rotary plane and is used to create accurate tenons or for rounding spindles for chairs. All of these 6 rounders are made by Ray Iles.
The thick blade is held in place by two washered screws which allows you to adjust or remove the blade for sharpening very easily.
Beech body, lightly linseed oiled.
Having reduced your spindle to a little over the size of the rounder...
Veritas Dowel Formers - Metric
This Veritas dowel former allows you to make dowel pins of whatever length you need. You simply drive an oversized piece of wood through the sharp edged hole of the solid A2 tool steel insert to shear excess material from the dowel. The Veritas 75mm diameter mounting plate has two screw holes for permanent mounting.
Can be used over a 3/4" or 20mm dog hole and is compatible with all inserts. Solid...
Veritas Dowel Maker Master Set
The Veritas® Dowel Maker lets you make perfectly sized dowel from 1/4" to 1" dia. in 1/16" increments, up to 4' long (or longer in the larger diameters) from any wood species you wish. The process uses two blades (both highly wear-resistant A2 tool steel), one for roughing and the other for final sizing. You just rip square stock 1/8" oversize and drive it through the dowel maker using a square...
Veritas Power Tenon Cutter Sharpening Kit
Each Veritas Power Tenon Cutter sharpening kit consists of:
1½" x 1½" Sanding Drum.
Pack of 3 x 80 grit Silicon Carbide Sleeves
Pack of 3 x 120 grit Silicon Carbide Sleeves
Veritas Tapered Snug Plug Cutters
Sometimes when plugging holes, no matter how carefully drilled, the holes finish up slightly oversize for the plug, especially in soft woods. These Veritas cabinet maker's snug plug cutters overcome this by cutting a slightly tapered plug.
The first 3mm of the plug is the diameter stated whilst the remaining length is then flared out at an angle of 3°. Just tap the plug into place until you...