Sort By
Per Page
View
Grid
List
Veritas Miniature Edge Plane
A 1/3-scale version of the current Veritas iron edge plane, which is the third-generation design of a model they first produced in 1986, this is a fully functional miniature. Useful for fine trimming work on thin stock up to 3/8" thick, such as with small-scale boxes or maquettes, it fits the hand well, making it easy to control under fingertip pressure.
The 2-3/8" long body and lever cap are...
Veritas Miniature Low Angle Block Plane
This version of the Veritas low-angle block plane is about a third the size of the original. At just under 2½" long and ¾" wide, it is a useful size for small-scale work or where a larger plane would be difficult to use. The low 12° bed angle combined with the 25° blade bevel gives it a cutting angle of 37°, making it also suitable for end-grain use.
The stainless-steel Norris-style adjuster...
Veritas Miniature Router
This 75mm wide router plane not only looks like its full-size counterpart, it works like it too. Comfortable to hold and manoeuvre, it is ideal for hardware installation, fine inlay or intarsia work.
It comes with a 3.2mm wide A2 tool-steel blade (hardened to HRC 60-62), positioned inboard for standard use or outboard for true bullnose work. The carefully machined stainless steel body has a ground...
Veritas Miniature Shoulder Plane
Weighing a mere 1.7 oz and measuring 2-1/2" long by 1/4" wide, this miniature version of the Veritas medium shoulder plane was developed out of a desire to test the limitations of their materials, design, and manufacturing processes (not to mention the patience of their engineers!).
Despite its diminutive size, it is fully functional and remarkably effective for fine trimming or cleaning the bottoms...
Veritas Modified Skate Small Plough Plane
From 1 March 2016, Veritas Small Plough Planes will have a modified skate profile allowing the use of beading blades (all three sizes).
The skate on the new version of the plane is much narrower than the original. For anyone wishing to use an older model with the beading cutters, the narrower skate is available to retrofit to the existing plane.
Veritas Narrow Router Plane Blades
These high-carbon steel router plane blades fit the Veritas large and merdium router planes, as well as Stanley #71 router planes (with the height-adjustment nut inverted). The narrow single-piece blades are available in both metric and imperial sizes.
Please note that Veritas do not produce a 3mm and a 1/8" blade, they consider them close enough in size so we only advertise the 1/8".
Sizes...
Veritas No.112 Style Scraping Plane
The Veritas® scraping plane is the ideal tool for final smoothing, especially when you have to deal with highly figured wood or reversing grain. With a well-sharpened blade and light cuts you can achieve excellent results on any wood. Tear-out is virtually eliminated with the cutting action of the included scraping blade. The adjustable frog enables blade angles from 0° to 25°, providing fine...
Veritas Pocket Plane + PM-V11 Blade
The Veritas Pocket Plane at just 4½" long and 1¼" wide overall, and weighing just less than 11oz, is aptly named - it's small and light enough to carry in an apron pocket all day.
Designed with a bevel-up configuration and a fully functional combined feed and lateral adjustment mechanism, it has a finer cutting action than you might expect from such a small tool. This makes it admirably suited...
Veritas Reeding Blades for Combination Plane
For use with the combination plane only, these PM-V11 steel reeding blades are available in two-, three- and four-reed versions, with 1/8", 3/16" or 1/4" diameter reeds. A 1/16" groove (also known as a quirk) is cut on either side of each reed. Made in Canada.
Veritas Fence for Large Router Plane
A very popular addition to the Veritas large router plane. Can be positioned on either side of the plane and will work on both straight and curved pieces.
Veritas Scraper Shave
The Veritas Scraper Shave is a versatile small scraper suitable for small-scale work, fine detailing, or any application where a normal scraping plane would be too large.
The design of the tool allows a controlled scraping action that effectively smoothes the workpiece. Can be used as a companion tool with the chair devils for smoothing of non-round chair parts such as crest rails, arm bows and...
Veritas Scrub Plane + PM-V11 Blade
The scrub plane is the tool of choice for major stock removal, the first step when flattening rough stock by hand. Much like a low-angle smooth plane, a scrub is not usually used parallel to the grain, but at an angle of 30° or more. The blade edge is ground with a 3" radius, so that it takes an aggressive cut. This is the tool you use to get stock into a condition where you then can use a...
Veritas Shooting Board
The 24" long shooting track fits the Veritas shooting plane.
This is a shooting board that doesn’t limit you to one angle, the fence is adjustable to let you shoot up to 60° from square. A spring-loaded button registers in fixed detents at 0°, 18°, 22.5°, 25.7°, 30°, 36°, 45° and 60° to let you quickly set the fence for square angles as well as miter cuts to produce frames with ten,...
Veritas Shooting Board Fence
The Veritas Shooting Board Fence Kit lets you construct a shooting board that doesn’t limit you to one angle – the fence is adjustable to let you easily shoot mitres of various angles. A spring-loaded button registers in fixed detents at 0°, 18°, 22.5°, 25.7°, 30°, 36°, 45° and 60° to let you quickly adjust the fence to shoot square angles as well as mitres for frames with ten, eight,...
Veritas Shooting Board Track
These are straight, durable aluminium tracks for making your own shooting board. They are designed to fit the Veritas Shooting Plane, and any other plane with a running surface between 2-1/32" and 2-1/4" wide; you can adjust the stainless-steel outer rail for a perfect fit. Set screws keep the rail from shifting in use.
The inner rail is 11/64" tall. Low-friction UHMW strips in the...
Veritas Shooting Plane + PM-V11 Blade
The mass of this Veritas Shooting Plane, its long base and low centre of gravity make it both stable and effective. Tipping the scales at just over 3.5kg and just under 400mm long, it is a substantial plane; you will appreciate the authority it provides when shooting.
The body is fully stress-relieved, ductile cast iron, with a sole and running surface machined flat and square to one another;...
Veritas Side Rebate Plane
The Veritas Side Rebate Plane is used for cleaning up or trimming sidewalls of rebates, dadoes or grooves to yield a perfect fit with its mate. It has a practical dual-blade configuration, coupled with an ingenious pivoting handle that permits right- or left-hand use to accommodate grain direction.
The thin sole functions much like a skate, allowing use in slots as narrow as 3/16" and to...
Veritas Skew Block Plane + PM-V11 Blade
The Veritas Skew Block Plane is a versatile plane that excels at trimming rebates and planing end grain. Of course, you can also use it as a normal block plane. Its Norris-style adjuster guarantees precise blade setting. Machined and surface ground, the 162 x 44mm body is ductile cast iron. It has a 12° bed angle and a movable toe fully enclosed by the body casting. A Bubinga knob locks the toe...
Veritas Skew Rabbet + PM-V11 Blade
Like the Stanley #289 that inspired it, it is configured with a blade skewed at a 30° angle to reduce cut resistance, aid in shaving clearance, and help pull the fence tight against the workpiece. Because the blade sits flush with the side of the plane body, corner cuts are clean and accurate.
Adjustable in two axes (vertical and horizontal) for depth and projection, the scoring spur sits...
Veritas Small Bevel-Up Bench Plane + PM-V11 Blade
This Veritas low angle smoother is 225mm long, 59mm wide and weighs only 1.25kg. It is easier to handle than a full size smoother. Think of it lying somewhere between a large block plane and a full size smoother, then you’ll see just how useful this plane can be.
Like a full size version, it is useful for final finishing of surfaces, end-grain work and for shooting mitres. The ductile cast...
Veritas Small Plough Plane
This is Veritas' redesigned small plough plane. While it still excels at cutting grooves, rabbets and tongues, it now has the ability to cut decorative beading (beading blades available soon).
Closest in size to the classic Record #044 plane, the preferred size of the old-style plough planes, it has a 6 5/8'' long fence that registers solidly to the workpiece and is through-drilled...
Veritas Small Plough Plane Conversion Kit
An excellent way to extend the functionality of the Veritas Small Plough Plane, this conversion kit allows the plane to accommodate our tongue-cutting blades as well as our straight blades over 3/8" wide. Designed to clamp and support both sides of the cutter to prevent twisting in use, the kit is composed of a 5" long machined ductile iron skate with a brass locking knob and a parallel adjustment...
Veritas Small Router Plane
The Veritas Small Router Plane is a versatile tool for fine work, particularly on narrow material or in confined areas, this small router plane is invaluable for any task requiring small recesses, grooves or dadoes.
The sole is designed to completely encircle the blade when in the closed-throat position for maximum registration to the workpiece, even when approaching from the side or working...
Veritas Small Scraping Plane
The Veritas Small Scraping Plane is a great tool for the final smoothing of small, flat surfaces, even highly figured timber, or small areas of difficult grain within a larger surface.
The scraping plane comes into action after the surface has been prepared as well as possible using a finely tuned smoothing plane. What the scraping plane does is to replace the need for sanding prior to applying...
Veritas Small Shoulder Plane + PM-V11 Blade
Designed to seat nicely in the hand, the smallest Veritas shoulder plane is easily controlled using a one-handed grip.
The lever cap wraps around the rear of the body, shrouding the blade adjustment mechanism so it does not obstruct the grip while acting as a comfortable rest for the palm.
The through-hole and textured recesses cast into the side of the body provide grip points for fingers.
The...
Veritas Standard Angle Block Plane + PM-V11 Blade
This is the standard angle version of the Veritas low angle block plane.
Preferred for general-purpose work, the 20° bed angle plus the 25° bevel angle on the bevel-up blade result in an effective cutting angle of 45°, the same as found in most bench planes.
A low-profile lever cap results in a plane that fits the hand well, at only 1/8" higher than its low-angle sibling.
Mechanically,...
Veritas Standard Blades for Combination & Small Plough Planes
All blades are made from A2 tool steel. Blades are made in Canada. These blades are suitable for both the Veritas Small Plough Plane and Veritas Combination Plane.
The standard blades are stocked for the right hand versions in 1/8", 3/16", 1/4", 5/16", and 3/8" or 4mm, 5mm, 6mm, 7mm, 8mm and 10mm widths.
Veritas Tongue-Cutting Blades for Combination & Small Plough Planes
All blades are made from A2 tool steel. Blades are made in Canada. These blades are suitable for both the Veritas Small Plough Plane and Veritas Combination Plane.
With these tongue cutters, you can now use our small plough plane for tongue-and-groove work. The blades are used in conjunction with our wide-blade conversion kit (see above), creating an interchangeable blade system that enables you...
Veritas Variable Angle Fence for Rebate Planes
This plane fence doesn't limit you to right angles - it allows accurate and consistent planing of any angle from 45° to 135°.
Angles are set using a square or angle gauge, or directly on an angle you wish to match.
The spring-loaded lever, which locks the fence, can be rotated out of the way if necessary.
Through-holes in the 11" long aluminium fence allow the attachment of a wooden...
Veritas Wide Blades for Combination & Small Plough Planes
All blades are made from A2 tool steel. Blades are made in Canada. These blades are suitable for both the Veritas Small Plough Plane and Veritas Combination Plane.
The wide blades are available in 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4" or 12mm, 16mm and 18mm widths. A wide-blade conversion kit (see above) is required for use of all wide blades with the Veritas...
Veritas Wide Router Plane Blades
These high-carbon steel router plane blades will fit the Veritas large and medium router planes, and the the Veritas hinge mortise plane, as well as Stanley #71 router planes (with the height-adjustment nut inverted). The narrow single-piece blades are available in five Imperial sizes
The 1/2" blades have a two-piece design and are available in two styles: straight and spear-point (for final...
Veritas Wooden Plane Hardware Kit + PM-V11 Blade
With this kit (and basic woodworking skills) you can build a bevel-down wood-bodied smooth plane with a Norris-style mechanism for easy depth and lateral adjustment.
The kit includes a blade, a Norris-style adjuster with a steel cup to seat it in, plus a knob, tapped insert and cross pin for the lever cap, all made of brass. The lapped PM-V11 blade is 1/8" thick and 1 5/8" wide with...
Blade for Veritas Small Bevel-Up Bench Plane
Veritas 1¾" Blade - PM-V11 - 25° Bevel. Fits the Veritas Small Bevel-Up Bench Plane.
Blades for the Veritas Low Angle Smoothing Plane
Veritas 2" Blade in PM-V11 to fit the Veritas Low-Angle Smoothing Plane
Blades for the Veritas Scraping Plane
Blades for the Veritas large scraping plane 05P2901.
Replacement Blade for Veritas Scraper Shave
This high-carbon steel replacement blade is 0.040'' thick and hardened to Rc48-52, with a 45° cutting edge that can be readily burnished to create a long-lasting hook.
Made in Canada.
Spare PM-V11 Blade for Veritas Bullnose Shoulder Plane
Replacement PM-V11 blade for the Veritas bullnose shoulder plane are lapped, 1/8" (0.125") thick.
Spare PM-V11 Blade for Veritas Large Shoulder Plane
Replacement PM-V11 blade for the Veritas large shoulder plane are lapped, 1/8" (0.125") thick.
Pair of Mounting Knobs for Veritas Universal Variable Angle Fence
A pair of stainless-steel knobs for mounting the Veritas universal variable angle plane fence to the bevel-up jointer, jack rabbet and shooting planes.
Made in Canada.
Spare PM-V11 Blade for Veritas Medium Shoulder Plane
Replacement PM-V11 blade for the Veritas medium shoulder plane are lapped, 1/8" (0.125") thick.
Spare PM-V11 Blade for Veritas Small Shoulder Plane
Ensure your Veritas Small Shoulder Plane continues to deliver exceptional results with this premium PM-V11 replacement blade. Known for its outstanding durability and ability to maintain a razor-sharp edge, the PM-V11 steel blade is the perfect upgrade for those who demand the highest performance from their tools.
Key Features:
Premium Material: Crafted from PM-V11 steel, known for its superior...
Blade for Veritas Low-Angle Spokeshave
Replacement PM-V11 blade to the Veritas Low-Angle Spokeshave (05P3273).
Blades for Veritas DX60 Block Plane
PM-V11 replacement blade for the Veritas DX60 and NX60.
Blade for Veritas Flat & Round Spokeshaves
Replacement PM-V11 blade to fit both the Veritas Flat (05P3373) and Round (05P3374) Spokeshaves.
Cutters for the Lee Valley Cast Scratch Stock
These cutters are for the Lee Valley Cast Scratch Stock.
Made in Canada.
Replacement 1/4' Blade for Veritas Small Router
Veritas Replacement 1/4" wide high-carbon steel blade for the .
Made in Canada.
Blades for Veritas Apron Plane
Veritas 1 1/4" blade for the Veritas Apron Plane. Available in O1 or PM-V11 steel with a 25° bevel, or an A2 toothed blade at 38°.
Blades for Veritas Low & Standard Angle Block Plane
Replacement blades for the Veritas Low & Standard angle block planes. 1 5/8'' wide.