Sort By
Per Page
View
Grid
List
Pfeil - 8 Piece Carving Set
This Pfeil 8 piece carving set is a starter set containing 7 full size fully forged tools and one chip carving tool. It is supplied in a rugged canvas roll case and the tools are honed and sharpened ready for use.
The tools included are 1/12, 1s/12, 5/12, 4/20, 7/10, 9/4, 12/8 and KERB12.
This in plain English means a 12mm chisel,
12mm skew chisel,
Series 5 12mm gouge,
Series 4 20mm gouge,
Series...
Pfeil - 12 Piece Carving Set
The Pfeil 12 piece carving set has everything you need for all simple carving projects.
This twelve piece fully forged, ready honed set contains the following full size tools: 1/8, 1s/8, 5/8, 5/20, 7/6, 7/14,7L/20, 8/4, 8a/10, 9/10, 11/3, and 12/6.
This in plain English means:
8mm straight and skew chisels,
8mm & 20mm Series 5 gouges,
14mm & 6mm Series 7 gouges,
20mm Series 7 long...
Pfeil - 25 Piece Carving Set
This large fully forged Pfeil 25 piece carving set is for challenging carving projects and contains the roll case, 80mm wooden mallet, 2 genuine Arkansas stones, honing oil, carving knife and 20 full size carving tools.
The tools included are:1/16, 1s/16, 2/20, 3/3, 3/12, 3/25, 5/35, 7/20, 8/7, 8/18, 8/25, 9/7, 8a/18, 9/15, 7L/25, 11/2, 11/10, 15/3, 12/10 and 14/8.
This in plain english means
16mm...
Pfeil 11 Piece Woodcarving Set
The Pfeil 11 piece woodcarving set has 11 full size tools supplied in a tool roll. The set was developed in collaboration with the National Trade School in Groden, South Tyrol.
Included in the set are 1S/10, 1S/20, 1S/30, 3/35, 4/20, 5/12, 7/10, 7/35, 11/5, 11/10 and number 12 (55mm) knife.
Pfeil Fishtail Chisel - Series 1F
Fishtail chisels are tools that easily reach difficult areas as the cutting edge is wider than the shaft.
Blades are thin and light.
Pfeil Series 1 - Double Bevel Chisel
These are straight chisels with a double bevel. Straight chisels are used to carve the blank into rough form and to work on large areas.
Pfeil Series 1e - Single Bevel Chisel
These are straight chisels with a single bevel. Like Series 1 chisels, these chisels are used to carve the blank into rough form and to work on large areas. Single bevel. The choice of single or double bevel is largely a matter of preference.
Pfeil Series 1Se - Single Bevel Skew Chisel
The Pfeil Series 1Se Single Bevel Skew Chisel is an essential tool for woodcarvers who require accuracy and control in their projects. This chisel is expertly designed to carve blanks into rough forms and is particularly effective for working on large areas. The single bevel edge allows for smooth, precise cuts, making it ideal for both roughing out and fine detailing.
Key Features:
Single...
Pfeil Series 1S - Double Bevel Skew Chisel
These are double bevelled skew chisels. The edge is slightly skewed for easy cutting action; often used without a mallet. Removes neat shavings. Double bevel – so the chisel can be used with the skew to the right or left. Useful for carving lettering and ornamental forms.
Pfeil Series 1a - Spoon Bent Chisel
For shaping recesses and working in corners.
Pfeil Series 21 - Dog Leg Chisels
Dog leg chisels are used for finishing rectangular depressions.
Pfeil Straight Gouge - Series 2
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 3
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 4
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 5
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 6
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 7
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Series 7 and 8 sweeps are particularly useful for finishing work.
Pfeil Straight Gouge - Series 8
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. The broad range of sweeps and widths offered by Pfeil opens unlimited possibilities in sculpture carving.
Series 7 and 8 sweeps are particularly useful for finishing work.
Paul Adamson recommends the 25mm tool for making a Kuksa, his book can be viewed here
Pfeil Straight Gouge - Series 9
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. The broad range of sweeps and widths offered by Pfeil opens unlimited possibilities in sculpture carving.
The 15mm is one of our best selling Pfeil tools.
Pfeil Straight Gouge - Series 11
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Series 11 are the narrowest and are ideal for carving fine details like hair.
Pfeil Series 12 - 60° V Parting Tools
For carving lettering and ornamentation and for sculpting figures.
60°
Pfeil Long Bent 60° V Tool - Series 12L
These tools are used for shaping recesses and working in corners.
Pfeil Series 13 - 90° V Parting Tools
The Pfeil Series 13 - 90° V Parting Tools are expertly crafted for woodcarvers who demand precision and versatility. These tools are designed for a range of detailed carving tasks, from lettering and ornamentation to sculpting intricate figures. Their 90° angle makes them ideal for creating sharp, clean cuts that enhance the depth and definition of your work.
Key Features:
High-Quality...
Pfeil Series 14 - 55° Soft V Parting Tools
For carving lettering and ornamentation and for sculpting figures.
55°
Pfeil Series 14a - Spoon Bent Soft V-tool (55°)
The Pfeil Series 14a - Spoon Bent Soft V-tool (55°) is specifically designed for woodcarvers who need precision and ease when working in tight or curved areas. This tool is perfect for creating smooth, flowing cuts in challenging spots, making it an essential part of any carver's toolkit.
Key Features:
Spoon Bent Design: The unique spoon bent shape allows for effortless carving in...
Pfeil Series 15 - 45° V Parting Tools
For carving lettering and ornamentation and for sculpting figures.
45°
Pfeil Series 16 - 35° V Parting Tools
For carving lettering and ornamentation and for sculpting figures.
35°
Pfeil Fishtail Gouges Series 3F
Fishtail chisels are tools that easily reach difficult areas as the cutting edge is wider than the shaft.
Blades are thin and light.
Pfeil Fishtail Gouges Series 5F
Fishtail chisels are tools that easily reach difficult areas as the cutting edge is wider than the shaft.
Blades are thin and light.
Pfeil Fishtail Gouges Series 7F
Fishtail chisels are tools that easily reach difficult areas as the cutting edge is wider than the shaft.
The 14mm in this series by Pfeil is a popular choice with our customers.
Blades are thin and light.
Pfeil Fishtail Gouges Series 9F
Fishtail chisels are tools that easily reach difficult areas as the cutting edge is wider than the shaft.
Blades are thin and light.
Pfeil Long Bent Gouges Series 5L
For shaping recesses and working in corners.
Pfeil Long Bent Gouges Series 7L
For shaping recesses and working in corners.
Pfeil Long Bent Gouges Series 8L
For shaping recesses and working in corners.
Paul Adamson recommends the 25mm tool for making a Kuksa, his book can be viewed here
Pfeil Series 2a - Spoon Bent Gouge
For shaping recesses and working in corners.
Pfeil Series 2a L - Spoon Bent Gouge - Left Skew
The Pfeil Series 2a L Spoon Bent Gouge (Left Skew) is an essential tool for woodcarvers who require precision and control when working on recessed or rounded surfaces. This left-skewed gouge, with its shallow sweep, is ideal for shaping and detailing in tight spaces, making it perfect for intricate carving tasks.
Key Features:
Left-Skewed Design: Provides easier access to challenging areas,...
Pfeil Series 2a R - Spoon Bent Gouge - Right Skew
Short bent chisels are used for shaping recesses and rounded surfaces. These are shallow (Series 2) right skew gouges.
Pfeil Back Bent Gouges Series 10
Pfeil Back Bent Gouges are for carving convex surfaces that are hard to reach, and for clean finish cuts.
The tools range from Least Convex to Most Convex: 10 - 20 - 30 - 25 - 28.
Please note that series 25 and 28 are more convex than 30.
Pfeil Back Bent Gouges Series 20
The Pfeil Back Bent Gouges from Series 20 are expertly crafted for woodcarvers who require precision and versatility in their work. These gouges are specifically designed to handle hard-to-reach convex surfaces, making them an essential tool for intricate carving projects.
Specialised Design: The back-bent shape allows for easy access to challenging areas, perfect for undercuts and detailing...
Pfeil Back Bent Gouges Series 30
Pfeil Back Bent Gouges are for carving convex surfaces that are hard to reach, and for clean finish cuts.
The tools range from Least Convex to Most Convex: 10 - 20 - 30 - 25 - 28.
Please note that series 25 and 28 are more convex than 30.
Pfeil Back Bent Gouges Series 25
Pfeil Back Bent Gouges are for carving convex surfaces that are hard to reach, and for clean finish cuts.
The tools range from Least Convex to Most Convex: 10 - 20 - 30 - 25 - 28.
Please note that series 25 and 28 are more convex than 30.