Sort By
Per Page
View
Grid
List
Robert Sorby Heavy Duty - Full Round Scraper
The Robert Sorby Heavy Duty Full Round Scraper is ideal for finishing on bowls and platters especially where a smooth curve is required.
1 1/2" (38mm) wide by 21" (525mm) overall length.
Robert Sorby Round/Side Cut Scraper
The Robert Sorby round/side cut scraper is designed for blending the parallel side wall and the curved bottom of vessels together. It is excellent for undercutting the rims of small bowls.
3/4" Round Side Cut Scraper - 16" with handle
Robert Sorby Box Scraper
The special cutting profile of this Robert Sorby box scraper makes it ideal for cutting the parallel side walls of end grain boxes. The small radius on the point at the bottom of the cutting section creates a smooth intersection between the side wall and the flat bottomed vessels. The profiles cause this to be very responsive and sensitive in use.
3/4" Box Scraper - 16" with handle
Crown Parting & Beading Tool - 1/4'' (6mm)
A beading and parting tool made by Crown Tools to assist in creating spindles.
Described as a parting and beading tool because, with practice, this tool can be used to roll a bead.
Sharpening - all parting tools can be sharpened with a fine stone.
Using a light touch on a grinder will create a useful litte burr which cuts a cleaner edge.
M2-HSS (High Speed Steel)
Stained beech handle....
Crown Tools Standard Parting Tool - 1/8'' (3mm)
Parting Tools are essentially used for parting, creating beads and spigots etc on spindle work.
There are a number of profiles. The standard parting tool is made from a simple rectangular bar from 1/8'' to 3/8'' - we have the 1/8'' available.
Sharpening - all parting tools can be sharpened with a fine stone but using a light touch on the grinder gives a useful litte burr...
Crown Tools Thin Parting Tool - 1/16'' (1.6mm)
This is Crown Tools Thin Parting Tool, width 1/16''.
Thin parting tools allow for very fine parting which is useful where you need the grain to match ie boxes, vases etc.
Sharpening - all parting tools can be sharpened with a fine stone but using a light touch on the grinder gives a useful litte burr which cuts a cleaner edge.
M2-HSS (High Speed Steel)
Stained beech handle.
Walleted.
Robert Sorby 1/16' Slim Parting Tool
This Robert Sorby 1/16" handy parting tool is designed to give the cleanest and finest of cuts with the minimum of waste wood. Its 1¼" blade width eliminates the flexing and twisting normally associated with such a thin blade.
The double bevel HSS cutting face gives the very finest of cuts. For added security the blade is seated and riveted deep into the handle.
Hamlet 1/16' Parting Tool
Parting tools are mostly used for cutting through or forming shoulders, and are essential in any workshop.
Hamlet 3/16'' Diamond Parting Tool
The Hamlet diamond parting tool is not made from diamonds, sorry to disappoint! It refers to the diamond shaped profile which reduces friction, and therefore heat to avoid unwanted burn marks, or even splitting. The shape also reduces the risk of binding in the cut.
Hamlet Parting Tools
Parting tools are mostly used for cutting through or forming shoulders, and are essential in any workshop. The 1/8 parting tool (HCT 090) is a popular starter tool.
Robert Sorby Standard Parting Tools
Robert Sorby standard parting tools are used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. The 1/8" (3mm) tool reduces the amount of waste, vital if the timber is an expensive, exotic one.
It also makes for a fine detailing tool, e.g. beads and fillets.
Hamlet Beading & Parting Tools
These beading and parting tools are used primarily for forming beads and spigots, these tools can also perform the standard parting tool tasks such as cutting through and forming shoulders.
Robert Sorby Beading & Parting Tool
The Robert Sorby beading and parting tool is a versatile tool used for parting off as well as producing beads. Its size makes it very stable, but also very sensitive in use. Ideal for creating the spigots to fit in a chuck.
3/8" Beading & Parting Tool - 18¾" with handle.
Robert Sorby Bedan Parting Tool
The Robert Sorby bedan parting tool is used in the same way as the beading and parting tool the relieved side bevel allows the tool to plunge cut in bowls and boxes with little risk of binding.
3/8" Bedan Parting Tool - 18¾" with handle.
Robert Sorby Diamond Section Parting Tool
The special profile of this Robert Sorby diamond section parting tool reduces the risk of binding in the cut. It also reduces the amount of heat build up caused by friction, thereby reducing the chance of burning the bottom of the parted project.
3/16" Diamond Parting Tool - 17" with handle.
Robert Sorby Fluted Parting Tool
This Robert Sorby fluted parting tool has a milled flute running along the bottom edge, creating two sharp spurs at the cutting face. These sever the fibres to produce a burnished finish. The tapered profile also reduces the risk of binding in the cut. The long bevel has a milled flute which is the cutting face. The small bevel his the sharpening face. When parting off, this unique arrangement causes...
Robert Sorby SteadyPro Turning System - With Stem
The Robert Sorby SteadyPro is a very easy to use jig that provides additional tool support when hollowing as well as many other woodturning operations.
The versatile SteadyPro fits a wide range of woodturning lathes by utilising the stems from the Robert Sorby modular tool rest system.
With the easy to adjust cantilever action of the clamping rollers, this ensures the optimum control for a large...
Crown Tools Mini & Midi Revolution
If you already use the Revolution Hollowing System from Crown Tools you will also want this tool for your small hollow forms and pots.
An ideal tool for beginners, whether cutting aggressively or with finesse. As with all Crown Tools, you get good value - the kits comprise of the tool with adjustable Super Ring, a REV13 cuttter and 2 hex keys.
Also includes instructions and a video link are...
Crown Tools Revolution 10'' Handle Extension
Crown Tools Revolution 10'' Handle Extension
Crown Tools Revolution 14'' Long Hollower with 2 Blades
The 14'' Long Hollower is one of the extras offered by Crown Tools for the Revolution Hollowing System.
A 3/4'' shaft machined down to 5/8'' to fit directly into the handle.
Supplied with Brass Clamp and 2 Long Hollower blades.
Crown Tools Revolution Bowl Gouge
Bowl Gouges to use with the Crown Tools Revolution Hollowing System are available in two sizes:
3/8'' (10mm) and 1/2'' (13mm)
Crown Tools Revolution Brass Clamp Kit
Crown Tools Revolution Brass Clamp Kit includes Extender and two Long Hollower (REV16) blades.
Crown Tools Revolution Brass Collet
Crown Tools Revolution Brass Collet available in 2 sizes 3/8'' (10mm) and 1/2'' (13mm)
Crown Tools Revolution Carbide Cutter (8mm) incl Extender & Key
Crown Tools Revolution Carbide Cutter (8mm) incl Extender & Key
Crown Tools Revolution Complete
Dave Bates (of Stiles & Bates) has described this system as one of the best systems on the market and is part of his own tool rack, which is a recommendation in itself.
Crown Tools Revolution Heart Cutter
Crown Tools Revolution Heart Cutter available in large and small.
Crown Tools Revolution Indexing Tool
Crown Tools Revolution Indexing Tool is used with the Texturing Tool.
Crown Tools Revolution Key Cutter
Crown Tools Revolution Key Cutter available in long and short.
Crown Tools Revolution Replacement Blades for Long Hollower
Set of 2 Long Hollower blades for the Crown Tools Revolution Hollowing System
Crown Tools Revolution Replacement Brass Cutter Holder
Brass Cutter Holder for use with Revolution Hollowing System
Crown Tools Revolution Shaft 1/2''
Crown Tools Revolution 1/2'' shaft only
Crown Tools Revolution Spindle Gouge
Spindle Gouges to use with the Crown Tools Revolution Hollowing System are available in two sizes:
3/8'' (10mm) and 1/2'' (13mm)
Crown Tools Revolution Spiralling Wheel
Crown Tools Revolution Spiralling Wheel available in 18 and 30 tooth.
Crown Tools Revolution Super Ring
Replacement Super Ring cutter for Revolution Hollowing System.
Crown Tools Revolution Swan Neck and Egg Scraper
A 12'' Swan Neck for use with Revolution Hollowing Sytem supplied with Egg Scraper (REV13), 1/2'' diamter shaft.
Crown Tools Revolution Texturing Tool
The Crown Tools Revolution Texturing Tool fits directly into the 1/2'' (13mm) collet of the Revolution Handle and is supplied with a 18 tooth texturing wheel.
The blade has an indexing line scribed down the centre to allow the use of Crown Tools Indexing Tool. Adding the Indexing Tool with the appropriate Spiralling Wheels available offers full spiralling capabilities.
Robert Sorby SteadyPro Turning System
The Robert Sorby SteadyPro is a very easy to use jig that provides additional tool support when hollowing as well as many other woodturning operations.
The versatile SteadyPro fits a wide range of woodturning lathes by utilising the stems from the Robert Sorby modular tool rest system.
With the easy to adjust cantilever action of the clamping rollers, this ensures the optimum control for a large...
Hamlet Big Brother
Hamlet Big Brother is the complete set consisting of Multi Handle (26''), 1/2'' cutter, edge protector and a 5/8'' straight stem.
Does not include reducing collets, side handle or hollowing gate, but these are available separately.
Hamlet Little Brother
The Hamlet Little Brother has the same set-up as its Big Brother. So it has the same 1/2" cutter and edge protector. The difference is that the Small Brother has a smaller (17") handle and the 5/8" stem is tapered.
Does not include reducing collets, side handle or hollowing gate, but these are available separately.
Hamlet Big / Little Brother Cutter
1x replacement cutter that fits the Hamlet Big and Little Brother Hollowing Tool.
Hamlet Hollowing Gate
Available in 19mm (3/4") and 25mm (1"). Other stem sizes can be made to order, but will have a longer lead time.
Hamlet Side Handle
Will fit both Little Brother & Big Brother.
Hamlet Big / Little Brother Edge Protector
1x replacement edge protector that fits the Hamlet Big and Little Brother Hollowing Tool.
Robert Sorby Hollowmaster
The Robert Sorby Hollowmaster is the perfect complement to the Multi Tip Hollowing Tool. It uses the same unique design of a meaty 3/4" flat shank which when laid on the tool rest gives ample support to prevent the tool from being turned over by the rotation of the wood. You are not fighting the laws of nature, but removing wood with ease.
It's swan neck design means that the Hollowmaster...
Robert Sorby Midi Hollowmaster
The Robert Sorby Midi Hollowmaster is designed for generating square sections such as shoulders or tenons where a turned part is to be assembled into a hole - a chair leg is good example. This cutter is also useful on the outside of a round form, as well as long straight sections on spindle work. Excellent results can be achieved in shear scraping mode with cutter especially effective shear scraping...
Robert Sorby Multi-Tip Hollowing Tool
The Robert Sorby Multi-Tip Hollowing tool is one of the most versatile hollowing tool.
It is ideal for end and side grain and will under-cut rims.
Also included is a scraper blade for half round, shallow and flat work as well as shear scraping. New beading and coving cutters can also be fitted.
Includes use and sharpening instructions.
Robert Sorby Midi Multi-Tip Hollowing Tool
All the benefits and attributes of the full size Robert Sorby Multi-tipped Hollowing tool (RS-200KT) but 2/3 the size, giving access through a much smaller aperture when turning fine hollow forms.
1/2" flat surface allows for aggressive hollowing and the swivel clamp allows under cutting.
This tool comes with a full set of instructions and three cutters (RS-222, RS-111C and RS-112C).
Crown Tools Bead Forming Tool
The Crown Tools Bead Forming Tool is used for accurately cutting beads which are identical each time.
Sharpen across the top with an oilstone or diamond hone.
Available in two sizes, 1/4'' (6mm) and 3/8"' (10mm)
M2-HSS (High Speed Steel)
Stained beech handle. Walleted.