Sort By
Per Page
View
Grid
List
Roughing Blade for Lie-Nielsen No. 4 and 5 Planes
A blade with a cambered edge for the No.4 and No.5 planes. Used for thicknessing boards.
Spare Blade for Lie-Nielsen No. 4 and 5 Plane
Replacement blade for Lie-Nielsen No. 4 or 5 Bench Planes.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror...
Spare Blade for Lie-Nielsen No. 40 1/2 Scrub Plane
Replacement blade for the No. 40-1/2 Scrub Plane. Comes ground with a 3" radius.
* 1.450" wide x 3/16" thick
* A2 Tool Steel
Spare Blade for Lie-Nielsen No. 48 Large Tongue & Groove Plane
For use in Lie-Nielsen No. 48 Tongue & Groove Plane. Centres on ¾" stock, leaving a ¼" wide tongue and .3125" deep grooves. On narrower or wider boards, the tongue will be offset from centre, but still hidden within the joint.
* Comes with a 25° flat ground bevel.
* 3/16" thick, O1 Steel.
!!!!Note:!!!! Blade does not work in vintage Stanley planes.
Spare Blade for Lie-Nielsen No. 49 Small Tongue & Groove Plane
For use in Lie-Nielsen No. 49 Tongue & Groove Plane. Centres on 1/2" stock, leaving a .166" wide tongue and .230" deep grooves. On narrower or wider boards, the tongue will be offset from centre, but still hidden within the joint.
* Comes with a 25° flat ground bevel.
* 3/16" thick, O1 Steel.
!!!!Note:!!!! Blade does not work in vintage Stanley planes.
Spare Blade for Lie-Nielsen No. 507 Rebating Block Plane
Replacement blade for Lie-Nielsen No. 60 1/2 Rebating Block Plane. Comes with a 25° flat ground bevel.
* 1.375" wide x .125" thick
* A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 60 1/2 Block Plane
Replacement blade for Lie-Nielsen No. 60 1/2 Adjustable Mouth Block Plane. Comes with a 25° flat ground bevel.
* 1.375" wide x .125" thick
* A2 cryogenically treated Tool Steel
Toothed Blade for Lie-Nielsen No. 60 1/2 Block Plane
Lie-Nielsen toothed blades have small chisel-like teeth .030" (.762mm) wide, and spaced .030" apart. They are used for heavy stock removal in difficult grain. Follow this with a fine-set Smoothing Plane.
Toothed blades are great for quick, heavy stock removal. However, something like a knot in pine can break the teeth so be careful around difficult spots. We recommend that you hone your...
Toothed Blade for Lie-Nielsen No. 610 Low Angle Jack Rabbet Plane
Image shows non-toothed blade
Toothed Replacement blade for the Lie-Nielsen No. 610 Low Angle Jack Rabbet Plane.
Toothed blades have small chisel-like teeth. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
The blade comes with a 25° flat ground bevel.
The blade comes ready to use, but honing a secondary bevel of 5° or 10° will...
Spare Blade for Lie-Nielsen No. 62 Low Angle Jack Plane
Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane.
The blade comes with a 25° flat ground bevel; it sits in the tool at 12°, making the included cutting angle 37°.
The blade comes ready to use, but honing a secondary bevel of 5° or 10° will increase performance, help achieve a razor edge quickly, and improve edge life in hardwoods.
* 2" wide x .175" thick
* A2 cryogenically...
Toothed Blade for Lie-Nielsen No. 62 Low Angle Jack Plane
Toothed Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane.
Toothed blades have small chisel-like teeth .030" (.762mm) wide, and spaced .030" apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
The blade comes with a 25° flat ground bevel; it sits in the tool at 12°, making the included cutting angle 37°.
The blade comes...
Spare Blade for Lie-Nielsen No. 7 1/2 Low Angle Jointer
Replacement blade for the Lie-Nielsen No. 7½ Low Angle Jointer Plane. Comes with a 25° flat ground bevel.
2.300" wide x .240" thick
A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 8 Jointer Plane
Replacement blade for Lie-Nielsen No. 8 Bench Plane.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish...
Spare Blade for Lie-Nielsen No. 97 1/2 Small Chisel Plane
Replacement blade for the Lie-Nielsen No. 97½ Small Chisel Plane. Comes with a 25° flat ground bevel.
1¾" wide x 3/16" thick
A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No.112 Large Scraping Plane
Ensure your Lie-Nielsen No. 112 Large Scraping Plane maintains its exceptional performance with this high-quality replacement blade. Designed to meet the rigorous demands of woodworking, this blade offers durability and precision for smooth, efficient scraping.
Key Features:
Premium Material: Crafted from A2 Tool Steel, cryogenically treated and double tempered, ensuring the blade holds a...
Spare Blade for Lie-Nielsen No.212 Small Scraping Plane
Replacement blade for the Lie-Nielsen No. 212 Small Scraping Plane. The blade is double tempered A2 Tool Steel, hardened to Rockwell 60-62. Their heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very...
Spare Blade for Lie-Nielsen No.85 Cabinet Maker's Scraping Plane
Replacement blade for the Lie-Nielsen No. 85 Cabinet Maker's Scraper. A2 Tool Steel hardened to Rockwell 60-62, cryogenically treated and double tempered. Their heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take...
Lie-Nielsen Screwdrivers with Cherry Handles
These Lie-Nielsen screwdrivers are made to fit specific screws on Lie Nielsen tools. They may be useful for other jobs as well. Modelled after gunsmith's screwdrivers with machined tips, they are correctly sized to fit the screw slots, giving you good power and control without slipping. The Chipbreaker and frog adjustment screwdriver are particularly useful.
The blades are hardened 416 Stainless...
Spare Blade for Lie-Nielsen Small Bronze Spokeshaves
Replacement blade for the Flat or Curved Sole Small Bronze Spokeshaves. Comes with a 25° flat ground bevel.
* 1.375" wide x .125" thick
* A2 cryogenically treated Tool Steel
Long Rod for Veritas Skew Block Plane
This optional 3 1/2" stainless-steel fence rod is 1 1/8" longer than the 2 3/8" rod supplied with the Veritas skew block plane to let you add a thicker fence extension (e.g., a tapered spacer for angled cuts) without restricting cutting width.
Made in Canada.
Long Rods for Veritas Skew Rabbet
Double guide rods and a special collet locking system prevent the fence from racking, and the large brass knobs allow fast and easy adjustments without tools. The fence can be positioned to allow a maximum rabbet width of 1½".
Prices include VAT
Optional Depth Stop for Veritas Skew Block Plane
For use with the skew block plane, this depth stop lets you finish cuts at a precise depth.
The cast zinc-aluminum alloy arm is held in place by the front knob. The steel shoe is adjustable from flush to a maximum depth of 5/8" and has relieved edges to avoid marking your work.
Made in Canada.
Pair of Mounting Knobs for Veritas Universal Variable Angle Fence
A pair of stainless-steel knobs for mounting the Veritas universal variable angle plane fence to the bevel-up jointer, jack rabbet and shooting planes.
Made in Canada.
Preston Replacement Spokeshave iron
This Ray Iles replacement iron fits the Preston Adjustable Spokeshave.
Made from of high carbon steel which is oil hardened and tempered to 59 - 61 Rockwell C.
Ray Iles 1 5/8' Stanley & Record Block Plane Blade
Designed for the older Record 09½, 015, 016, 017, 018, 019, 0120 and 0220. Stanley 9½, 9¾, 15, 15½, 16, 17, 18, 19, 118, 220 and A18.
Width: 1-5/8"
Length: 4-1/4"
High grade carbon steel hardened to 59 - 61 Rockwell C.
Ray Iles 1 3/8'' Modern Stanley Block Plane Blade
Designed for the modern Stanley 60½ Block Plane
Width: 1 3/8''
Length: 4 3/8''
High grade carbon steel hardened to 59 - 61 Rockwell C.
Ray Iles 1 3/8'' Stanley & Record Block Plane Blade
Designed for the older Record 0230. Stanley 60, 60½, 61 and 103.
Width: 1 3/8''
Length: 4 3/8''
Thick: 3mm (1/8'')
High grade carbon steel hardened to 59 - 61 Rockwell C.
Ray Iles 1 5/8'' Modern Stanley Block Plane Blade
Designed for the modern Stanley 9½ Block Plane
Width: 1 5/8''
Length: 4 1/2''
High grade carbon steel hardened to 59 - 61 Rockwell C.
Ray Iles Replacement Irons
Ray Iles produces these replacement O1 carbon steel blades for your bench plane (see also blades for block planes, spokeshaves & special purpose planes).
These blades (irons) are 50% thicker than standard irons and manufactured from 01 high carbon, oil hardened tool steel. They are designed to fit Stanley Bailey & Bedrock designs as well as Record & Preston bench planes. The extra thickness...
Record 044 Plough Plane Replacement Irons RI012
Set of eight cutters (1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 9/16") for Record 044 Plough Plane.
Replacement Blade for Clifton Low Angle Block Plane
1 5/8'' blade to fit the Clifton low angle block plane.
The Clifton blades are made from O1 steel that has been cryogenically treated to give a hardness of 60 to 62 Rockwell C.
Made in Sheffield, UK
Slow Adjuster for Veritas Bevel-Up Planes - Type A
The fine thread on this Norris-style adjuster slows blade advancement, making it easier to set blade projection precisely. An easy retrofit, it simply replaces the regular adjuster supplied with our bevel-up planes.
Two versions are available. This type fits the bevel-up smoother, bevel-up jointer, low-angle jack, low-angle smooth and low-angle block planes.
Made in Canada.
Spare PM-V11 Blade for Veritas Bullnose Shoulder Plane
Replacement PM-V11 blade for the Veritas bullnose shoulder plane are lapped, 1/8" (0.125") thick.
Spare PM-V11 Blade for Veritas Large Shoulder Plane
Replacement PM-V11 blade for the Veritas large shoulder plane are lapped, 1/8" (0.125") thick.
Spare PM-V11 Blade for Veritas Medium Shoulder Plane
Replacement PM-V11 blade for the Veritas medium shoulder plane are lapped, 1/8" (0.125") thick.
Spare PM-V11 Blade for Veritas Small Shoulder Plane
Ensure your Veritas Small Shoulder Plane continues to deliver exceptional results with this premium PM-V11 replacement blade. Known for its outstanding durability and ability to maintain a razor-sharp edge, the PM-V11 steel blade is the perfect upgrade for those who demand the highest performance from their tools.
Key Features:
Premium Material: Crafted from PM-V11 steel, known for its superior...
Stanley 66 Replacement Irons
This replacement cutters fit the Stanley No.66 hand beader. Set of 8, as per original pattern.
These replacement irons are made of high carbon steel which is oil hardened and tempered to 59 - 61 Rockwell C and will have edge keeping qualities equal to the originals.
Veritas 2 1/4'' Blades for Bevel-Up and Low-Angle Bench Planes
2 1/4" blades that fit the Veritas Bevel-Up Smoother, Low-Angle Jack, Bevel-Up Jointer. Also fits the Shooting Board Plane (25° bevel).
Veritas Beading Blades for Combination & Small Plough Planes
All blades are made from PM-V11® tool steel. Blades are made in Canada. These blades are suitable for both the Veritas Small Plough Plane and Veritas Combination Plane.
These blades let you use the small plow plane to create decorative beading on workpieces. The blades are available in 1/8", 3/16" and 1/4" bead diameters. A 1/16" groove is cut on either side of the bead.
Veritas Bevel-Up Jointer Fence
The Veritas low-angle jointer fence enables you to shoot consistent and accurate square or bevelled edges with your Veritas bevel-up jointer. The 11" long anodized aluminium fence can be attached to either side of the plane with the brass thumbscrews provided; a set screw can be adjusted to square the fence to the sole.
As supplied, the 2" tall guiding face can be used to plane edges perfectly...
Veritas Blade Storage Box
This blade box holds the blades for the combination plane or small plow plane, displaying them edge up so you can easily pick the one you need. Made of Baltic birch plywood, it holds blades side by side in two 6" long rows. Because the width of the blades determines how many fit in the box, the number of blades you can store depends on which blades you own. However, all the new blades for the combination...
Replacement Blade for the Veritas Cabinet Scraper
This 2 3/4" wide replacement blade, for use with the Veritas Cabinet Scraper (05P3205) and Veritas String Inlay Scraper (05P3210), has two edges ground at 45° so that the blade can be flipped over, reducing the frequency of sharpening sessions.
Veritas Chamfer Guide for Low-Angle Block Plane
You can convert the Veritas Low-Angle Block Plane (05P22.01) and Standard Block Plane (05P22.30) into chamfer planes in seconds with this cunning guide.
Easy to install - you first set the chamfer width on the guide, then install the guide by unscrewing the front knob of the plane, replacing the toe piece with the chamfer guide and tightening the knob again. It is ready to go.
Adjustable for...
Veritas Combination Plane Box
This storage box provides a place to keep the assembled plane, the second pair of fence rods and up to two of the blade boxes. Slots in the sides of the box base act as rests for the fence rods, holding the plane upright. The top of the box fits into channels in the box base, locking the plane in position as well as securing other contents.
Made in Canada from Baltic birch plywood, the box is...
Veritas Combination Plane Rabbet Blade - 1 1/16'
Will only work with the Veritas combination plane. 1-1/16" wide PM-V11 rabbeting blade lets you cut rabbets up to 1". 35° bevel angle
Veritas Fence for Large Router Plane
A very popular addition to the Veritas large router plane. Can be positioned on either side of the plane and will work on both straight and curved pieces.
Veritas Fluting Blades for Combination Planes
For use with the combination plane, these blades are used to create decorative concave fluting on workpieces. The PM-V11 steel blades are available in 3/16", 1/4", 3/8" and 1/2" flute diameters. Made in Canada.
Veritas Hand Jointer
The Veritas Hand Jointer allows you to accurately joint small parts by hand.
Box-making and modelmaking often require small parts that are too dangerous to run through a power jointer and difficult to joint with a hand plane; balancing a plane on pieces much smaller than its sole can be awkward.
This hand jointing accessory for Veritas medium and large shoulder planes lets you bring the work...