Sort By
Per Page
View
Grid
List
Crucible Bench Square
The Crucible Bench Square is a handy, lightweight and accurate tool that's useful for many woodworking operations. Based on an 18th-century square in A.J. Roubo's masterpiece, "l'Art du menuisier", this version uses modern technology to ensure it is accurate and stays that way.
The Bench Square is great for checking a board's edge when planing joints for a panel glue-up....
Crucible Centre Square
The steel centre square from Crucible Tool.
3-1/4'' (82mm) long x 1-5/8'' (16mm) wide x almost 3/8'' (9.5mm) thick overall. The working area of the blade is 2-7/16'' (62mm) long and includes a 1/8'' (3mm) hang hole. It is ideal for chairmakers or turners who need to mark the centers of spindles or sticks for turning or shaving.
Using the tool is simple....
Joseph Marples Trial 1 - 10" Mitre Square
The Joseph Marples Trial 1 Double Brass Faced Mitre Square is a tool based on designs that were last made over 70 years ago which were marked with the Trial 1 brand or corporate mark.
This high quality Mitre Square has a blade length of 10" (250mm) which is made from chemically blacked spring steel.
This Mitre Square is made from either Walnut or Rosewood and has four brass diamond rivets...
Shinwa 45° Mitre Square - Metric
Stainless steel mitre square.
Measurements on both sides
Angular accuracy 45° & 135°: 0.2 mm or less per 100 mm
Base length: 115mm
Shinwa 45° Mitre Square with 90° Guide - Metric
Stainless steel mitre square.
Measurements on both sides
Angular accuracy 45°, 90° & 135°: 0.2 mm or less per 100 mm
Base length: 115mm
Shinwa Combination Square 45°, 90° & 135° - Metric
Shinwa Combination Metric Square made of stainless steel includes a mitre gauge and square.
Measurements on both sides
Angular accuracy 45° & 135°: 0.2 mm or less per 100 mm
Angular accuracy 90°: 0.1 mm or less per 100 mm
Base length: 163mm
Sterling Dovetail Rule DTR-2
The Sterling DTR-2 Dovetailing Rule is made to fit Starrett 4'' double and combination squares that have 1/16'' (1.6mm) thick rulers.
The original Sterling DTR-1 is too thick for these Starrett castings. The Sterling DTR-2 is incredibly handy for checking the squareness of your dovetails to ensure excellent fit and “gap less” joints after assembly. The reduced size of...
Veritas 1 1/2'' Pocket Layout Square
The Veritas Pocket Layout Square is machined from solid aluminium extrusion, anodized and laser etched on both sides, this triangular layout square is only 1½" on a side. The 1/2" wide by 1/8" thick base registers solidly against a workpiece and has a 1/8" offset on one edge and 1/4" on the other.
Like a standard layout square, it has 1/16" rule graduations as well as angle graduations in 10°...
Veritas Imperial Rule for Sliding Square
These Imperial rules for the Veritas sliding squares are interchangeable.
Veritas Metric Sliding Square
These cabinetmaker's squares are used to lay out or transfer measurements quickly and accurately; you always have an ample reference face against your work without having to flip the square. This also simplifies working in two axes at once (e.g., measuring in 50mm and over 40mm), substantially reducing the chance of error when measuring and marking two dimensions.
The stainless steel blade is...
Veritas Pocket Layout Square - Metric
Just as a speed square is an essential layout tool for carpenters and framers, these small squares are similar in both form and function but are appropriately sized for laying out joinery and other common workshop tasks.
Available individually and as a set including 35mm, 60mm and 85mm squares – each a compact, lightweight tool that fits into a pocket, comes to hand nicely, and is easy to...
Veritas Pocket Layout Square - Set of 3 Metric
Just as a speed square is an essential layout tool for carpenters and framers, these small squares are similar in both form and function but are appropriately sized for laying out joinery and other common workshop tasks.
Available individually and as a set including 35mm, 60mm and 85mm squares – each a compact, lightweight tool that fits into a pocket, comes to hand nicely, and is easy to...
Veritas Square Fence
A carpenter's square is frequently needed just because of its size. The key disadvantage of such a square (its lack of a supporting fence ledge) can now be eliminated using a Veritas square fence.
The 8" (200mm) long anodized aluminum extrusion can be readily attached to either the stock or blade of your square (depending upon intended use) with the two integral brass screws. The face of...
Woodpeckers DeadNutz Square 3.5''
Woodpeckers DeadNutz Square
Machined to perfection using the latest technology, giving rise to its name. To ensure the DeadNutz Square lives up to its name, Woodpeckers uses Wire Electrical Discharge Machining (EDM) technology. Wire EDM erodes away the metal at the micron level, resulting in incredible precision and quality.
DeadNutz is made from one piece of 3/8'' (9.8mm) thick stainless...
Woodpeckers in-DEXABLE Centre Finder
The Woodpeckers in-DEXABLE Centre Finder with 150mm metric blade and Rack-It.
The Centring Head holds the blade at a 45° angle relative to machined 90° surfaces. Marking the two diagonals of a square locates centre. It’s even easier to find the centre of a circle...just hold the Centring Head against the circle in any two different spots and strike a line across the diameter. The intersection...
Woodpeckers T-Square 600mm
Woodpeckers T-Square Metric 600mm with Rack-It
Striking lines parallel with the edge of your stock is made easy with the Woodpeckers Precision T-Square. The beam has a lip that rests on the top surface of your stock, preventing the tool from rolling like many T-Squares. Precision machined scribing guides are spaced every milimetre down the length of the blade. This allows you tro drop the point...
Woodpeckers Woodworking Rule Protractor Head - Metric
Woodpeckers Woodworking Rule Protractor Head - Metric. Includes wall Rack-It wall mount.
Woodpeckers Woodworking Rules have earned a reputation for accuracy, convenience and ease-of-use. Now you can add ''versatility'' to that list of features. The newest addition to the Woodpeckers product line converts any Woodpeckers Woodworking Rule (except the 150mm) into an adjustable T-Square...