Knife Sharpening

This double sided leather strop from James Barry measures 8" x 3" x 3/4". The UK sourced leather is 4.5mm thick and is bonded to both sides of a wooden block. One side is coarse which is used to accommodate the James Barry Mirror Paste. This does not just polish to an amazing standard but also puts on that final hone to achieve a scary edge. The size is ideal to compliment the...

With Tormek's patented KJ-45 Centreing Knife Jig, you'll get symmetrical bevels with the same angle on both sides of the knife, regardless of the thickness or geometry of the blade. Whether you're sharpening a regular kitchen knife or a thicker, tapered hunting knife, you'll get the same results on both bevels of the knife without needing to reset the jig. The KJ-45 Centreing Knife...

This well balanced, patented jig provides extra stability when sharpening knives with long, flexible blades such as fillet knives. With the KJ-140 Wide Centering Knife Jig, you achieve a symmetrical grind with the same angle on both sides of the blade. Regardless of the thickness and geometry of the blade, it will self centre in the jig, giving you the same result on both bevels. The longer clamp stabilises...

A strop is a leather strip used to polish the edge of a chisel, plane iron or a knife. Stropping is the final part of the sharpening process in achieving a truly sharp edge. Stropping has always been the accepted way to finishing a cut throat razor guaranteeing the closet of shaves. Unlike honing which removes metal from the bevel, stropping burnishes away any microscopic metal strands clinging to...

This Flexcut Knife Strop has an 8'' by 2'' leather stropping surface, designed exclusively for keeping your knife blades sharp. Includes Flexcut Gold Polishing Compound.

Pfeil Honing Strops for the finest edges for all knives. Birch base, faced with a fine calf leather. Size 300 x 40 x 20mm

Micro fine abrasive paste achieves a mirror finish after initial sharpening using a leather strop. 8,000 - 10,000 Grit. Micro fine abrasive cream to create a mirror finish after initial sharpening using a leather strop. Leaves tools a super keen cutting edge to give clean accurate cuts. Simply apply paste to the strop, rub to absorb and then stroke the edge to be polished across the strop until polished...

The honing compound is used together with the Tormek Leather Honing Wheels. The unique qualities of the leather together with the honing compound will effectively remove the burr created from sharpening, without damaging the edge. At the same time, it will also polish the bevel to the finest finish. The honing compound contains a combination of micro abrasives and polishing components (average...

For hunting knives and those with blades over 8". Please note that you will already need to own a jig to use this (either the PEKJIGS or PEKJIGL).

The Tormek Small Knife Holder SVM-00 opens up the possibility to sharpen those really small knife blades, which up until now have been difficult to sharpen. Normally small knives have been sharpened free-hand but every time it was a challenge to get a consistent shape and almost impossible to control the edge angle. The holder works together with the Tormek Knife Jig SVM-45. You can sharpen...