Sort By
Per Page
View
Grid
List
Pfeil Chip Carving Knife - Kerb 10
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 10 also known as Tarsomesser.
This knife is for narrow angles and corners, cutting from the top to the wood.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 35mm
Pfeil Schaller Knife
Pfeil Schaller knives have a crowned blade. The back is also rounded so it does not touch the work. Hence being able to use them to carve concave curves and flat surfaces. Plum handle.
Large: blade length is 45mm.
Small: blade length is 30mm.
Pfeil Spoon Knives - Half Round Large
Pfeil Spoon Knives are used for hollowing out spoons and similar concave forms.
Blades are hardened and come with an oiled octagonal ash handle.
Blade length 60mm
Overall length 195mm
Series 21 Half-round large, bevel left; typically suited for a right handed person pulling the knife towards themselves. Or a left handed person pushing the kinfe away.
Series 22 Half-round large, bevel right;...
Pfeil Spoon Knives - Half Round Small
Pfeil Spoon Knives are used for hollowing out spoons and similar concave forms.
Blades are hardened and come with an oiled octagonal ash handle.
Blade length 50mm
Overall length 165mm
Series 25 Half-round small, bevel left; typically suited for a right handed person pulling the knife towards themselves. Or a left handed person pushing the kinfe away.
Series 26 Half-round small, bevel right;...
Pfeil Spoon Knives - Large
Pfeil Spoon Knives are used for hollowing out spoons and similar concave forms.
Blades are hardened and come with an oiled octagonal ash handle.
Blade length 45mm
Overall length 180mm
Series 23 Round large, bevel left; typically suited for a right handed person pulling the knife towards themselves. Or a left handed person pushing the knife away.
Series 24 Round large, bevel right; typically...
Pfeil Spoon Knives - Round Small
Pfeil Spoon Knives are used for hollowing out spoons and similar concave forms.
Blades are hardened and come with an oiled octagonal ash handle.
Blade length 35mm
Overall length 150mm
Series 27 Round small, bevel left; typically suited for a right handed person pulling the knife towards themselves. Or a left handed person pushing the kinfe away.
Series 28 Round small, bevel right; typically...
Wood is Good Unbreakable Mallets
Wood is Good wood carving mallets from the USA.
These mallets are made with an American maple handle and a urethane head that is guaranteed to be unbreakable. They are designed to be quiet and yet able to transmit the maximum force to the tool.
The smaller sizes seem to be the most popular (with the 18oz the biggest seller) but the biggies also appeal to those of you doing larger scale work or...
Woodcarvers Mallet 10oz - Hornbeam
A locally made woodcarver's mallet, all the way from deepest, darkest Norfolk.
Designed by professional woodcarver (Gerald Adams) and made by Colin Dalton. Mallets are notoriously difficult to choose but this design seems a good weight and fits comfortably in the hand.
Seasoned Hornbeam head with Ash handle.
2¾" (70mm) head
8" (200mm) high
10oz (300g)
Pfeil Brass Carving Mallets
These Pfeil Brass Carving Mallets have a brass head with cherry handle which are gentle on the wrist and elbow.
The MK Klein weighs 450g and the MK Gross weighs 700g.
Supplied in cardboard sleeve.
Pfeil Hornbeam Mallets
Pfeil Hornbeam Mallets are the perfect choice for woodcarvers seeking durability and precision in their tools. Expertly turned from a single piece of high-quality Hornbeam, these mallets offer exceptional balance and control, ensuring every strike is accurate and effective.
Solid Hornbeam Construction: Crafted from a single piece of Hornbeam, these mallets are built to withstand rigorous use...
Veritas Small Journeyman's Mallet
The Veritas Small Journeyman's Mallet has a solid brass head, a walnut handle and a simple, refined profile, making it an elegant and effective mallet.
Designed for work that requires more finesse than power, it can be held by the handle or used with the head cradled in your palm, allowing you to more precisely control the force of blows. The head is attached to the handle with a blind threaded...
Veritas Large Journeyman's Mallet
The Veritas Large Journeyman's Mallet has a solid brass head, a walnut handle and a simple, refined profile, making it an elegant and effective mallet.
Designed for work that requires more finesse than power, it can be held by the handle or used with the head cradled in your palm, allowing you to more precisely control the force of blows. The head is attached to the handle with a blind threaded...
Narex Premium Carving Mallets
A sturdy and durable mallet made by Narex of quality European hornbeam wood that withstands the heaviest blows.
Available in small and large.
Small - 600g (250mm tall, 110mm diamter head)
Large - 900g (270mm tall, 130mm diamter head)
MoraKniv 220 Push Knife
Whilst this looks like a traditional drawknife, this is actually sold as a wood splitting knife. The idea being that you take your larger chunks of wood and split them into smaller pieces of kindling that are easier to light.
It is double bevelled (has a bevel either side like a kitchen knife), whereas drawknives are single bevelled. However you can still use this for other purposes than just splitting...
Pfeil Small Drawknife
This is a compact, handy draw knife from Pfeil with a razor-sharp cutting edge. Very useful for small scale work.
Made with cherry handles, the length of the blade is 110mm and the overall length is 290mm.
Flexcut 5'' Flexible Draw Knife KN16
This flexible Flexcut draw knife has 5 inches of workable edge, designed to flex around contours where large amounts of stock need to be removed quickly. The tool can be flexed to accommodate concave or convex surfaces. Cuts can be made that conform more closely to the finished shape, taking less time to sand or scrape.
The curved edge gives a skew-like cutting action for a low resistance cut. This...
Veritas Carvers Drawknife - PM-V11
An ordinary drawknife is too large for most carving - the Veritas drawknife is designed for ease of use with maximum control.
The teardrop-shaped handles are cocked at 45° to the blade and nestle comfortably in your hands. The polished 4" x 1/8" x 3/4" blade is ground and honed to a perfect edge, and is supplied with a blade guard.
The drawknife blade is custom made for us...
Flexcut 3' Draw Knife KN25
This handy little draw knife by Flexcut was developed for fan carving but works great for skinning small areas of bark and roughing-off corners.
Made in the USA by Flexcut.
Pfeil Small Straight Drawknife
Pfeil Small straight drawknife with cherry handles.
Overall length 310mm with a cutting edge of 120mm.
Pfeil Large Curved Drawknife
Pfeil large curved drawknife with Cherry handles, and goatskin protector for blade.
430mm overall length, blade length 240mm, weight 450g.
Gently curved blade.
Pfeil Large Straight Drawknife
This Pfeil Straight Drawshave comes with a goatskin case and has cherry handles.
The blade is 250mm in length and the overall length is 440mm.
Classic carpenters design with straight back and straight blade.
Ray Iles 6' Gent's Drawknife
This Gent's drawknife made by Ray Iles is a delicate drawknife which has a 6" cutting edge and slightly splayed handles. It is made from O1 high carbon tool steel and is fitted with beautiful curved boxwood handles and brass ferrules.
Made in England
Ray Iles 6' Small Draw Knife
The Ray Iles 6" drawknife is a standard carpenter's drawknife, made from 01 high carbon steel and fitted with beech handles and brass ferrules.
Made in England
Ray Iles 8'' Mike Abbott Pattern Draw Knife
This drawknife designed by Mike Abbott and manufactured by Ray Iles has a 8" cutting edge, with beech handles. This 8" drawing knife has slightly flared handles which are bent backwards, meaning the handles are at approximately the same angle, whether you are using them back down, or cannel down.
Made in England
Robert Sorby Drawknife
10" cutting edge, ash handled draw knife. Straight back and straight blade with slightly splayed handles.
Flexcut 1'' Mini Draw Knife KN17
This miniature draw knife by Flexcut is designed for hard-to-reach areas, where a pulling action is more conducive to efficient stock removal. The flexible shank allows the cutting angle to be changed easily for contoured cuts.
Made in the USA by Flexcut.
Oscar Rush Large Bowl Adze
A hand forged 50mm diameter hand adze with elliptical sweep profile to the cutting edge.
The head weight is approximately 600g with a 230mm - 235mm long (just over 9''), hand carved, faceted, kin dried ash handle.
The leather adze cover is made by Oscar using Italian leather with solid brass rivets (these are much stronger than cap rivets).
This adze has been carefully designed for...
Oscar Rush Large Carving Axe - Left Grind
A large carving axe with a really broad edge (left grind), designed to throw big chips!
This axe will still work well in the right hands when creating smaller carvings.
145mm - 150mm (6'') edge - LEFT grind.
The head weight is approximately 850 - 900g - SO BEWARE THIS IS QUITE A BEAST
NOTE - Should you wish to strike the poll, please do so with a wooden mallet (not a steel hammer).
Handle...
Oscar Rush Large Carving Axe - Right Grind
Large carving axe (RIGHT GRIND) with a really broad edge, designed to throw big chips!
This axe will still work well in the right hands when creating smaller carvings.
145mm - 150mm (6'') edge - RIGHT grind.
The head weight is approximately 850 - 900g - SO BEWARE THIS IS QUITE A BEAST
NOTE - Should you wish to strike the poll, please do so with a wooden mallet (not a steel hammer).
Handle...
Oscar Rush Medium Carving Axe
A standard weight carving axe retaining a relatively compact design but with a broader curved edge for slicy cuts.
This carving axe has a 120mm - 125mm (5'') edge - SYMMETRICAL grind only for this axe (also known as double grind).
The head weight is approximately 625g. If striking the poll, do so with a wooden mallet (not a steel hammer)
The handle - hand carved 300mm - 320mm long...
Oscar Rush Small Bowl Adze
A hand forged 30mm diameter hand adze with a compound sweep profile to the cutting edge (more of a U profile).
The head weight is approximately 450g with a 210mm - 215mm long (just over 8'') hand carved, faceted, kin dried ash handle.
The leather adze cover is made by Oscar using Italian leather with solid brass rivets (these are much stronger than cap rivets).
This adze has been...
Oscar Rush Small Carving Axe
A small carving axe for all sizes of carving.
This stout hand forged carving axe has a 95mm - 100mm (4'') edge - SYMMETRICAL grind (also known as double grind).
The head weight is approximately 475 - 500g.
If striking the poll, do so with a wooden mallet (not a steel hammer).
Handle - hand carved 275mm - 285mm long (just over 11''), faceted, kin dried ash handle.
The...
The Robert Sorby ProEdge Ultimate Sharpening System
The updated version of the ever popular Robert Sorby ProEdge sharpening system. In all honesty the machine has remained the same as nothing really needed to be updated!
Robert Sorby have however changed from using the old terms of 'Basic' and 'Deluxe or Plus'. Thankfully it has been simplified, and the Sorby machine comes in one edition which includes a single 120 grit aluminium...
Gransfors Bruk Large Carving Axe 475
A chop axe for hewing bowls and other wooden objects, artistic wood carving and architectural work. The characteristic curved shape of the cutting edge, carried well above the head’s eye, the position of the edge in proportion to the handle, the rather thick bit and the big angle of the wide beveled face makes the axe a good carving tool. You "cut on the beveled face" with curved movements. This...
Pfeil Hatchet
The Pfeil Hatchet is forged from quality steel.
Overall length 460mm (about 18")
Weight 1300gms with cutting edge of 140mm.
Journeyman Handcrafts Wool Lined Tool Roll
Keep your carving tools protected and portable with this Journeyman Handcrafts tool roll made from a two colours of 8oz waxed cotton canvas giving a lovely contrast of colour when rolled up. The tool roll is lined with a cream wool to give added protection to your tools.
This tool roll is made to last and will endure many years of hard use. It’s double stitched with a very strong bonded nylon...
Pfeil Sculptor's Hatchet
The Pfeil Sculptor's Hatchet is a small hatchet which is very handy and easy to guide. With leather edge protector.
Overall length 280mm (about 11")
Weight 550gms with cutting edge of 80mm.
Pfeil Sculpture's Adze
The Pfeil Sculptor's Adzes follow old French designs.
Available with Straight, Curved or Round blades, these tools are forged from quality tool steel, hardened and sharpened with Hickory handles.
Straight:
Overall length 450mm (about 18").
Weight 800gms.
Cutting edge of 65mm.
Curved:
Overall length 450mm (about 18")
Weight 850gms.
Cutting edge of 60mm.
Round:
Overall...
Henry Taylor Bowl Adze
Sheffield made hand forged adzes by Henry Taylor for single handed use.
This one is a tight gouge (sweep 9), however this lucky fella is outcannel which makes it a Bowl Adze.
At the other end to the cutting edge is a square faced hammer poll.
All Henry Taylor adzes have an ash handle of 250mm (about 10") .
The overall head size (from the square face of the hammer poll to the cutting edge)...
Henry Taylor Hand Adze Deep Curved Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes; this one is a tight incannel gouge (sweep 9), and is offered with an incannel or outcannel grind.
The outcannel grind is favoured by those working concave surfaces as it allows the leading edge to enter the working area easier.
At the other end to the cutting edge is a square faced hammer...
Henry Taylor Hand Adze Shallow Curved Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes, this one a gouge end with a shallow/mid gouge or there is a tight gouge (sweep 9) and a 50mm (2") straight edge (like a chisel).
At the other end to the cutting edge is a square faced hammer poll.
All the adzes have an ash handle of 250mm (about 10") .
The overall head size (from the...
Henry Taylor Hand Adze Straight Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes, this one a 50mm (2") straight edge (like a chisel) or curved end (like a gouge) with either a shallow/mid gouge or a tight gouge (sweep 9).
At the other end to the cutting edge is a square faced hammer poll.
All the adzes have an ash handle of 250mm (about 10") .
The overall head size...
Muller French-Style Sculptors Adze
Again, these adzes are from Leonhard Muller's Carpenter's Hatchets range but they are based on the traditional French design where the head gradually flares from the poll. 3 sweep widths to chose from and all come with straight hickory handles.
Straight 450mm hickory handles (about 18")
Choice of 65mm, 60mm or 56mm wide medium sweep cutting edge.
Auriou 'Mellow Hog' Rasp
The Mellow Hog Rasp - Half round 12" (300mm) G6
A Mellow Hog is a calmer version of its aggressive brother The Hog. The difference between the cut of the 2 rasps can be seen in the photos.
The original Hog has the coarsest cut for hand rasps made by Forge de Saint Juery at cut 3 (cut = stitch).
The Hog is a great tool for reducing roughed out blanks for cabriole legs and guitar necks...
Auriou Curved Cabinet Maker's Rasp
Useful for shaping the buttock areas for chair seats and for other concave shaping work. This 10" cabinet rasp is stitched on the underside only and is curved along its length.
Size - 250mm x 32mm x 5.5mm Grain 9
Left Handed Auriou Albi Combination Rasps
These are the Left Handed versions, to see the Right Handed please CLICK HERE.
These are stitched on both faces with two "safe edges" on either side.
The rasp is thinner close to its tip to allow ease of entry into your workpiece. For flat and convex work only.
As normal, the longer the rasp, the coarser it is. We offer 2 sizes. The sizes shown are the rasp dimensions without the...
Left Handed Auriou Cabinet Maker's Rasps
These are the Left Handed versions, to see the Right Handed please CLICK HERE.
These are the basic rasps for shaping work. They are relatively wide in proportion to their length giving you considerable cutting power. You will get surprisingly smooth finishes to your work. As a general guide you should chose a rasp which is 3/4 times longer then the width of the piece you are shaping.
As an example...
Left Handed Auriou Cranked Neck Curved Ironing Rasps
These are the Left Handed versions, to see the Right Handed please CLICK HERE.
The Left-Handed Auriou Cranked Neck Curved Ironing Rasps are precision tools ideal for working in small, tight areas. The cranked tang provides knuckle clearance, and the curved shape allows easy access to your workpiece. Available in various widths (10mm, 15mm, 20mm, 25mm, and 30mm) and grains, they offer control and...