Sort By
Per Page
View
Grid
List
Pfeil Round Burnisher
The Pfeil Round Burnisher is used for burnishing cabinet scrapes.
9mm diameter polished steel bar, 165mm long with cherry handle.
Pfeil Abegglen Detail Knives
These Pfeil Abegglen detail knives have two cutting edges. One side with round cutting edge and the other with a hollow cutting edge. As a result it is possible to make deep cuts but also to carve letters and ornamental work. A universal knife with many uses.
Small hexagonal oiled acacia wood handle.
Large: Blade Length 130mm, Cutting Edge 33mm.
Medium: Blade Length 125mm, Cutting Edge 27mm.
Small:...
Tormek Machine Cover
The Tormek machine cover protects your machine from shavings and wood dust.
100% Cotton.
Breathable.
Fits all Tormek models.
Gyokucho Flush Cutting Saw Double Edge 125mm
Blade Length : 125mm.
Overall Length : 215mm.
Max Cutting Depth : N/A.
Teeth Pitch / TPI : Fine side 1.0mm / 25.4. Coarse side 1.3mm / 19.5
Blade Thickness : 0.3mm.
Gyokucho Product Number : 1151.
Weight : 50g.
A flexible 0.3mm blade with no set allows you to cut flush wihtout damaging your work surface. Useful for trimming dowels, plugs and smaller joints. These are great saws...
Gyokucho Razorsaw 291 Compact Ryoba 180mm
Full Name : Gyokucho Razorsaw Compact Ryoba.
Blade Length : 180mm.
Overall Length : 390mm.
Max Cutting Depth : N/A.
Teeth Pitch / TPI : Crosscut 1.5mm / 16.9. Rip Cut 3.7-2.7mm / 8-9.
Blade Thickness : 0.5mm.
Cutting Width : 0.81mm.
Teeth Pattern : Crosscut & Rip Cut.
Gyokucho Product Number : 291.
Weight : 160g.
Replacement Blade : S291
The compact range of saws can...
Journeyman Handcrafts Canvas Tool Roll
Keep your carving tools protected and portable with this Journeyman Handcrafts tool roll made from heavy weight 16oz green cotton canvas.
Designed with 16oz cotton canvas, this pouch is made to last and will endure many years of hard use. It’s double stitched with a very strong bonded nylon thread which is water and rot resistant. Finished with veg tan drawstrings for longevity and wooden toggles...
Lee Valley Drilling Jig with Metric Bushings
This Lee Valley product is based on a suggestion from cabinetmaker Stephen Shepherd for a jig that could drill chair spindles, this centreing jig has a large bearing surface for accuracy, with sighting marks for easy visual alignment. Used for end drilling round stock 5/16" to 1 1/2" in diameter, it also permits drilling of spheres and has a V notch for drilling into the side of a cylinder...
Orbicut
Orbicut is from the manufacturers of Kirjes in Sweden...........
Designed to be safe and efficient (yes it was designed by Swedes!) it has two HSS cutters inserted into a ball which project about 0.1mm. This small amount of projection makes the tool easy to control whilst producing thin shavings instead of dust.
* Works fast and efficient at a low speed (5000Max RPM).
* Stays sharp for a long...
Saburrtooth 1/4' Cylinder - 1/2' x 3/4'
Head Diameter: 1/2"
Head Length: 3/4"
Thomas Flinn Pax Fine Curved Inlay Saw 15tpi
The Pax Fine Inlay Saw is made for similar purposes to the Veneer Saw although this saw has 15tpi with a super thin curved blade specially crafted for the finest veneer work.
The saw has a brightly polished brass back and Walnut handle. Blade length 3". Individually blister packed.
Veritas Set-Up Blocks - 9 Piece Metric Set
Setting up machines in the shop can be a frustrating and inaccurate undertaking. Tape measures and rulers are difficult to use when measuring gaps between curved bits and guide fences. Worse, machines often require two hands to adjust, leaving nothing to hold the measuring tool. The Veritas set-up blocks help solve this problem. Simply place the appropriate block or combination of blocks between the...
Veritas Tabling Scribe
No matter how careful you are with layout and assembly, a legged project will almost always be wobbly. One way to ensure the project will sit properly without rocking is by tabling it; that is, placing the project on a fl at table (e.g., the top of a table saw), marking a consistent trimming line on each leg, and then cutting to this line. The Veritas Tabling Scribe simplifies this step, providing...
Pfeil Back Bent Gouges Series 20
The Pfeil Back Bent Gouges from Series 20 are expertly crafted for woodcarvers who require precision and versatility in their work. These gouges are specifically designed to handle hard-to-reach convex surfaces, making them an essential tool for intricate carving projects.
Specialised Design: The back-bent shape allows for easy access to challenging areas, perfect for undercuts and detailing...
Pfeil Brass Carving Mallets
These Pfeil Brass Carving Mallets have a brass head with cherry handle which are gentle on the wrist and elbow.
The MK Klein weighs 450g and the MK Gross weighs 700g.
Supplied in cardboard sleeve.
Gyokucho Razorsaw Seiun Saku Ryoba Komame (Fine) 240mm
Full Name : Gyokucho Razorsaw Seiun Saku Komame Ryoba.
Blade Length : 240mm.
Overall Length : 575mm Rattan / 555mm TPE.
Max Cutting Depth : N/A.
Teeth Pitch / TPI : Crosscut 1.3mm / 19.5. Rip Cut 3.8-2.4mm / 6.7-10.6.
Blade Thickness : 0.45mm.
Cutting Width : 0.73mm.
Teeth Pattern : Crosscut & Rip Cut.
Gyokucho Product Number : 611 Rattan / 662 TPE.
Weight : 215g Rattan /...
Ray Iles 6' Gent's Drawknife
This Gent's drawknife made by Ray Iles is a delicate drawknife which has a 6" cutting edge and slightly splayed handles. It is made from O1 high carbon tool steel and is fitted with beautiful curved boxwood handles and brass ferrules.
Made in England
Robert Sorby Fingernail Profile Spindle Gouges
Robert Sorby fingernail profile spindle gouges are ideal for fine detailing on spindle work. The wing tips are ground back to reduce the danger of catching when working in confined areas.
Kirjes Extractor Handle
Kirjes Extractor Really Sucks The Dust
Secure the Kirjes Dust Extractor to the flexible shaft of the Kirjes Sanding System and turn most vacuum cleaners into an economical dust extraction system. The dust extraction handle covers and encloses the flex shaft handpiece and chuck - putting the dust suction point and the hand grip as close to the sanders as possible - allowing you to clearly see how...
Replacement Blade for Nakaya Ryoba 240mm Classic Saw
Replacement blade for the 240mm Ryoba Classic Saw.
0.5mm thick blade with trapezoid teeth for crosscuts andt triangular teeth for rip-cut.
Spoon Knife Sheath - Leather
A well made sheath from Wood Tools will age beautifully and protect the edge of the tool and the user for many years. These spoon knife sheaths are made to perfectly fit all our spoon knives.
The sheaths are made from top quality leather made specially for us by Clayton’s at Chesterfield, one the UK’s last traditional tanneries. The leather is thick and tough yet incredibly flexible...
Blue Spruce Optima Fishtail Chisels - Curly Maple
Optima Fishtail Chisels handle the most critical paring cuts in tricky spots with extremely limited access. The prime example is half-blind dovetail sockets, but once you've added these exquisite chisels to your toolbox, you'll find dozens of other places where they're just the right tool for the job. The 5:1 taper ratio provides clear access to the most common hand-cut dovetail angles.
All...
Slow Adjuster for Veritas Bevel-Up Planes - Type A
The fine thread on this Norris-style adjuster slows blade advancement, making it easier to set blade projection precisely. An easy retrofit, it simply replaces the regular adjuster supplied with our bevel-up planes.
Two versions are available. This type fits the bevel-up smoother, bevel-up jointer, low-angle jack, low-angle smooth and low-angle block planes.
Made in Canada.
Crucible Dividers - Type 2
The Crucible Dividers, Type 2, allow you to quickly adjust the tips with one hand and easily lock in an important setting with a common No. 8 screwdriver. Made from alloy steel in the United States, these dividers are designed especially for woodworking - chairs, dovetails, shelving and other furniture-scale tasks.
Why are they called Type 2 dividers? The first-generation dividers were excellent,...
Veritas Front Vice - Large
This vise has rugged, machined, double guide rods and a single-lead Acme screw.
The large front vise is 10-1/2" × 21" overall with a 1-1/8" dia. screw, and 13" clamping capacity (less the thickness of your wooden jaws). The larger vise has an offset center screw to allow vertical clamping without skewing.
Can be added to an existing bench or built into a new one.
Mounting screws included.
Made...
Flexcut Mini-Detail Knife KN27
The mini-detail knife has Flexcut's smallest 3/4" straight blade. It is made from ultra-thin material so as not to disturb adjacent wood for very delicate cuts.
Tormek AngleMaster
The Tormek AngleMaster has two functions: you can use it to set the edge angle before sharpening or to measure the existing angle of a specific tool.
The edge angle can be set from 10° to 75°. The AngleMaster is designed to work on any grindstone diameter from 250 mm or 10" down to 150 mm or 6", so you can achieve an exact setting even as the stone wears.
Kutzall 4 1/2'' Shaping Disc - Extreme
Made in the USA, the Kutzall Shaping Wheels provide a great combination of material removal and surface quality. Efficient with or against the grain, these wheels have a long wear life.
Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.
NOTE: These wheels should only be used on non-metallic materials.
The Shaping Wheels...
Lee Valley Cabinet Scraper Case
Scrapers can be awkward to store without damaging their cutting edges. Our scraper case solves the problem by keeping your scrapers isolated from each other in a padded sleeve. With nine pockets, arranged in groups of three, there is plenty of space for many different thicknesses and shapes.
The heavy polyester roll is double-layered and padded. Each section is fitted with a hook-and-loop strip...
Lie-Nielsen Tapered Tenon Saw with Cherry Handle
Lie-Nielsen have redesigned their three most popular back saws to feature a slight tapering of the blade from toe to heel. This taper gives you better control over precise cuts. When you reach the gauge line on the front of your stock, the blade is slightly above the line on the back side, which reduces the risk of sawing past your line. In addition, the taper introduces an angled approach to your...
Oscar Rush Large Bowl Adze
A hand forged 50mm diameter hand adze with elliptical sweep profile to the cutting edge.
The head weight is approximately 600g with a 230mm - 235mm long (just over 9''), hand carved, faceted, kin dried ash handle.
The leather adze cover is made by Oscar using Italian leather with solid brass rivets (these are much stronger than cap rivets).
This adze has been carefully designed for...
Robert Sorby 6 Piece Turning Tool Set
Beginners 6 Piece Woodturning Set in a box.
The ultimate full size, all round woodturning set. Perfect for the beginner for any type of turning from bowls to spindles. These 6 tools are also essential for the more experienced turner.
Contains:
3/4" Roughing Tool
1/8" Parting Tool
3/8" Bowl Gouge
3/8" Spindle Gouge
3/4" Oval Skew
1/2" Round Nose Scraper
A...
Saburrtooth 1/4' Sphere - 1/2' x 1/2'
Head Diameter: 1/2"
Head Length: 1/2"
If grits are not displayed they are no longer available.
Saburrtooth 2'' (50mm) Round (Donut) Faced Shaping Wheel
15% discount from price shown.
Saburrtooth Flat Faced Shaping Wheel - 4'' Sanding Disc with Holes
15% discount from price shown.
Shinwa Compass with Pencil Lead
A well made Shinwa compass which is capable of of drawing circles comfortably up to 300mm in diameter. When you use the extension arm this can be extended to almost 600mm in diameter.
Geared pivot for smooth operation, and will hold the arms in position in use.
Includes 4 replacement pencil leads and the extension arm.
Veritas Miniature Marking Gauges
These are fully working versions of the Veritas wheel marking and dual marking gauges, but only one third of the size. Their smaller scale allows greater control and makes these exquisite tools perfect for small marking tasks that require a delicate touch. Each is 57mm long and weighs just over 14g and 21g respectively.
Like their full-size counterparts, they cut (not tear) fibres for clear marks...
Veritas Scrub Plane + PM-V11 Blade
The scrub plane is the tool of choice for major stock removal, the first step when flattening rough stock by hand. Much like a low-angle smooth plane, a scrub is not usually used parallel to the grain, but at an angle of 30° or more. The blade edge is ground with a 3" radius, so that it takes an aggressive cut. This is the tool you use to get stock into a condition where you then can use a...
Famag Lewis Auger Bits
Famag Lewis Auger Bits in two lengths.
Overall Length 235mm Spiral Length 160mm
Overall Length 460mm Spiral Length 380mm
A "Lewis" pattern consists of a main self tapping thread which pulls the bit through the cut and two cutting edges.
This version has a stepped head and is used for drilling deep holes in soft wood and European hard wood with power drill and joinery machines.
Due...
Pfeil - 25 Piece Carving Set
This large fully forged Pfeil 25 piece carving set is for challenging carving projects and contains the roll case, 80mm wooden mallet, 2 genuine Arkansas stones, honing oil, carving knife and 20 full size carving tools.
The tools included are:1/16, 1s/16, 2/20, 3/3, 3/12, 3/25, 5/35, 7/20, 8/7, 8/18, 8/25, 9/7, 8a/18, 9/15, 7L/25, 11/2, 11/10, 15/3, 12/10 and 14/8.
This in plain english means
16mm...
Pfeil Back Bent Gouges Series 30
Pfeil Back Bent Gouges are for carving convex surfaces that are hard to reach, and for clean finish cuts.
The tools range from Least Convex to Most Convex: 10 - 20 - 30 - 25 - 28.
Please note that series 25 and 28 are more convex than 30.
.png "Last Ones!")
Henry Taylor No.9 Fishtail Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Veritas Edge-Trimming Planes
Edge-trimming planes are used for final trimming cuts on jointed boards to ensure smooth edges at exactly 90° to the face, and for working end grain. In many instances you will need only one model; the appropriate choice is often based on which of your hands is dominant.
However, neither model is exclusively for left or right handed users, as the planes are in fact complementary. Having both...
Arbortech Contour Sander
The Arbortech Contour Sander is solidly made, ingeniously designed and precision engineered. It uses an innovative new design resulting in a true random orbit action that is only evident when the disc is applied to the work. It gives an excellent finish free of sanding marks and won't leave the friction burns that a spinning pad is prone to do.
The sander is designed to fit a 100 or 110mm portable...
Auriou Straight Gouge Series No.5 - 11mm (7/16')
This Auriou Series No.5 - 11mm (7/16") Straight Gouge forms part of the Chris Pye Lettering Tools range. To view more tools from the range please follow this link.
These tools were designed by master carver Chris Pye and hand forged in the traditional way by Auriou Toolworks at Forge-de-Saint-Juery in France.
Auriou woodcarving tools have been among Chris Pye's favourite tools since...
Flexcut Single Bevel Chisels
The Flexcut Single Bevel Chisels are precision tools designed for detailed woodworking. These unhandled chisels are compatible with the SK100, SK102, and SK103 quick-connect handles and the SK109 universal adapter for power carving. Ideal for clean, single-bevel cuts, they offer versatility and control in various carving projects.
Available Widths:
1/4" (6mm) SK329
3/8" (9mm) SK316
1/2"...
Veritas Small Plough Plane Conversion Kit
An excellent way to extend the functionality of the Veritas Small Plough Plane, this conversion kit allows the plane to accommodate our tongue-cutting blades as well as our straight blades over 3/8" wide. Designed to clamp and support both sides of the cutter to prevent twisting in use, the kit is composed of a 5" long machined ductile iron skate with a brass locking knob and a parallel adjustment...
Clifton 500 10" Convex Spokeshave
Clifton Spokeshaves are made from virtually unbreakable spheridal graphite/malleable iron; the surfaces are finished and polished to give maximum comfort in the hand; the weight and balance permits the Spokeshave to sit firmly on the wood so that only a stroking action is required to make them cut. The firm seating and fine adjustment allow the woodworker to make delicate nuances in the weight of cut....
Blades for the Veritas Scraping Plane
Blades for the Veritas large scraping plane 05P2901.