Sort By
Per Page
View
Grid
List
Brusso Brass Ball Catch BC-263
The Brusso BC-263 morticed ball catch, consisting of a brass cylinder with spring-loaded steel ball and a brass keeper, is used to secure cabinet doors. The grooved sides of each half, measuring 1/4" in diameter, provide grip when mounted and a reservoir for glue.
Diameter: 0.250" - 1/4" - 6mm
Brusso Brass Ball Catch BC-265
The Brusso BC-265 brass morticed ball catch, consisting of a brass cylinder with spring-loaded steel ball and a brass keeper, is used to secure cabinet doors. The grooved sides of each half, measuring 11/32" in diameter, provide grip when mounted and a reservoir for glue.
Diameter: 0.344" - 11/32" - 9mm
Brusso Brass Ball Catch BC-275
The Brusso BC-275 brass morticed ball catch, consisting of a brass cylinder with spring-loaded steel ball and a brass keeper, is used to secure cabinet doors. The grooved sides of each half, measuring 7/16" in diameter, provide grip when mounted and a reservoir for glue.
Diameter: 0.438" - 7/16" - 11mm
Brusso Brass Box Lid Stay JB-250
The Brusso JB-250 brass morticed lid support provides an elegant brass look and a functional and reliable 90 degree stop for boxes and cases. Excellent for humidor, jewellery box, and other keepsake projects.
The body is morticed into the side, and a flanged cylindrical anchor is pressure fitted and glued into the lid. The body measures 2-7/8" x 1/4" x 1/2" deep.
Length: 2.875"...
Brusso Brass Butt Hinge CB-301
The Brusso CB-301 full mortice butt hinge, milled from heavy brass stock, is the smallest of four versions manufactured for boxes and small cabinets. It measures 3/4" x 13/16".
Length: 0.750" - 3/4" - 19mm
Width: 0.813" - 13/16" - 21mm
Leaf Thickness: 0.086" - 5/64" - 2mm
NOTE - All Brusso hinges come in PAIRS. Screws are INCLUDED (brass for the brass...
Brusso Brass Butt Hinge CB-302
The Brusso CB-302 full mortice butt hinge, milled from heavy brass stock, is one of four versions manufactured for boxes and small cabinets. It measures 1¼" x 13/16".
Length: 1.250" - 1¼" - 32mm
Width: 0.802" - 13/16" - 21mm
Leaf Thickness: 0.086" - 5/64" - 2mm
NOTE - All Brusso hinges come in PAIRS. Screws are INCLUDED (brass for the...
Brusso Brass Butt Hinge CB-303
The Brusso CB-303 full mortice butt hinge, milled from heavy brass stock, is one of four versions manufactured for boxes and small cabinets. It measures 1¼" x 1 1/16". Available with ball finials as CB-303B.
Length: 1.250" - 1¼" - 32mm
Width: 1.063" - 1-1/16" - 27mm
Leaf Thickness: 0.085" - 5/64" - 2mm
NOTE - All Brusso hinges come in...
Brusso Brass Butt Hinge CB-407
The Brusso CB-407 full mortice butt hinge, milled from heavy brass stock, is the largest of four versions manufactured for boxes and small cabinets. It measures 2" x 1½". Available with ball finials as CB-407B.
Length: 2.000" - 51mm
Width: 1.490" - 1½" - 38mm
Leaf Thickness: 0.109" - 7/64" - 3mm
NOTE - All Brusso hinges come in PAIRS. Screws...
Brusso Brass Butt Hinge with Ball Finials CB-303B
The Brusso CB-303B full mortice butt hinge with ball finials, milled from heavy brass stock, is one of four different sizes manufactured for boxes and small cabinets. It measures 1-1/4" x 1-1/16". Available without ball finials as CB-303.
Length: 1.250" - 1-1/4" - 32mm
Width: 1.063" - 1-1/16" - 27mm
Leaf Thickness: 0.085" - 5/64" - 2mm
NOTE - All Brusso...
Brusso Brass Centre Pivot Hinge ST-12
The Brusso ST-12 brass centre pivot hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. The leaf measures 1-3/8" x 5/16" x 3/32".
Length: 1.375" - 1-3/8" - 35mm
Width: 0.313" - 5/16" - 8mm
Leaf Thickness: 0.094"...
Brusso Brass Centre Pivot Hinge ST-18
The Brusso ST-18 brass centre pivot hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. The leaf measures 1¾" x 3/8" x 1/8".
Length: 1.750" - 1¾" - 45mm
Width: 0.375" - 3/8" - 10mm
Leaf Thickness:...
Brusso Brass Hook MC-437
The Brusso MC-437 brass hook, with a flattened dome face ringed by a band-shaped edge, is pressure-fit and glued into place.
It measures 3/8" in diameter and projects 15/16". The mounting dowel is 3/16" in diameter.
Brusso Brass Jewellery Box Feet HD-702
The HD-702 brass decorative box foot comprises a square base with a radiused inner corner and an inset block foot. The base is mortised into the bottom of the box and fastened with two screws. It measures 7/8" x 7/8" with an overall thickness of 1/4". Supplied as a set of 4.
Routing template available: TJ-702
Brusso Brass Jewellery Box Feet JB-423
The JB-423 decorative box foot, comprised of a sphere with a disC-shaped foot, is pressure-fit and glued into place. It measures 1/2" in diameter and projects 3/8". The mounting dowel is 5/16" in diameter.
Supplied as a set of 4.
Brusso Brass Jewellery Cabinet Pull MC-422
The Brusso MC-422 brass decorative knob, with a flattened dome face ringed by a band-shaped edge, is pressure-fit and glued into place. It measures 5/16" in diameter and projects 5/16". The mounting dowel is 3/16" in diameter.
Diameter: 0.303" - 5/16" - 8mm
Length: 0.305" - 5/16" - 8mm
Brusso Brass Jewellery Cabinet Pull MC-428
The Brusso MC-428 brass decorative knob, with a flattened dome face ringed by a band-shaped edge, is pressure-fit and glued into place. It measures 3/8" in diameter and projects 7/16". The mounting dowel is 3/16" in diameter.
Diameter: 0.375" - 3/8" - 9.5mm
Length: 0.436" - 7/16" - 11mm
Brusso Brass Jewellery Cabinet Pull MC-432
The Brusso MC-432 brass decorative knob, with a flattened dome face ringed by a band-shaped edge, is pressure-fit and glued into place. It measures 1/2" in diameter and projects 9/16". The mounting dowel is 5/16" in diameter.
Diameter: 0.500" - 1/2" - 13mm
Length: 0.598" - 9/16" - 14mm
Brusso Brass Latch JB-818
The Brusso JB-818 brass latch is morticed into the lid and front of a box or case up to the edge of the cove moulding. The spring-loaded pivoting bar releases the latch when the button is pressed.
Length: 1.375" - 1-3/8" - 35mm
Width: 0.500" - 1/2" - 13mm
Depth: 0.370" - 3/8" - 10mm
Routing template available: TJ-818
Brusso Brass Latch JB-828
The Brusso JB-828 brass latch is morticed into the lid and front of a box or case up to the edge of the cove moulding. The spring-loaded pivoting bar releases the latch when the button is pressed. It measures 2" x 3/4" x 3/8".
Length: 2.000" - 2" - 50mm
Width: 0.750" - 3/4" - 19mm
Depth: 0.370" - 3/8" - 10mm
Routing template available: TJ-828
Brusso Brass Lift-Off Hinge - Left Hand - LH-201LH
The Brusso LH-201 brass heavyweight lift-off cabinet butt hinge with two knuckles is suitable for doors with a thicknesses between 3/4" and 1". It measures 2½" x 1¾". This hinge is handed; a right-hand hinge is shown.
Length: 2.500" - 2½" - 64mm
Width: 1.750" - 1¾" - 45mm
Leaf Thickness: 0.104" - 7/64" - 3mm
Packs...
Brusso Brass Lift-Off Hinge - Right Hand - LH-201RH
The Brusso LH-201 brass heavyweight lift-off cabinet butt hinge with two knuckles is suitable for doors with a thicknesses between 3/4" and 1". It measures 2½" x 1¾". This hinge is handed; a right-hand hinge is shown.
Length: 2.500" - 2½" - 64mm
Width: 1.750" - 1¾" - 45mm
Leaf Thickness: 0.104" - 7/64" - 3mm
Packs...
Brusso Brass Offset Pivot Hinge L-19
The Brusso L-19 brass offset pivot hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. The leaf measures 5" x 3/4" x 3/8".
Length: 5.000" - 5" - 127mm
Width: 0.750" - 3/4" - 19mm
Leaf Thickness: 0.375" - 3/8"...
Brusso Brass Offset Pivot Hinge L-23
The Brusso L-23 brass offset pivot hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. The leaf measures 1-3/8" x 5/16" x 1/8".
Length: 1.375" - 1-3/8" - 35mm
Width: 0.313" - 5/16" - 8mm
Leaf Thickness: 0.125"...
Brusso Brass Offset Pivot Hinge L-37
The Brusso L-37 brass offset pivot hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. The leaf measures 1¾" x 3/8" x 1/8".
Length: 1.750" - 1¾" - 44mm
Width: 0.375" - 3/8" - 9mm
Leaf Thickness: 0.125"...
Brusso Brass Offset Pivot Hinge L-39
The Brusso L-39 brass offset pivot hinge is employed when a minimum of visible hardware is desired, or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. The leaf measures 1¾" x 3/8" x 1/8". The L-39 has a longer knuckle for wide throw conditions.
Length: 1.750" - 1¾" - 44mm
Width:...
Brusso Brass Offset Pivot Hinge L-87
The Brusso L-87 brass offset pivot hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. The leaf measures 2" x 1/2" x 3/16".
Length: 2.000" - 2" - 51mm
Width: 0.500" - 1/2" - 13mm
Leaf Thickness: 0.188" - 3/16"...
Brusso Brass Offset Pivot Hinge L-93
The Brusso L-93 offset pivot hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. The leaf measures 2½" x 5/8" x 1/4".
Length: 2.500" - 2½" - 64mm
Width: 0.625" - 5/8" - 16mm
Leaf Thickness: 0.250"...
Brusso Brass Offset Pivot Hinge L-97
The Brusso L-97 offset pivot hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. The leaf measures 3¼" x 3/4" x 5/16".
Length: 3.250" - 3¼" - 83mm
Width: 0.750" - 3/4" - 19mm
Leaf Thickness: 0.313"...
Brusso Brass Quadrant Hinge HD-638
The Brusso HD-638 brass quadrant hinge is engineered with a built-in stop that allows a lid to remain open at 95°. The arc is morticed into the side of the box, beneath the leaf. The hinge is sold in pairs. Each leaf measures 1¼" x 1".
Length: 1.240" - 1¼" - 31mm
Width: 1.000" - 1" - 25mm
Leaf Thickness: 0.083" - 5/64" - 2mm
Note -...
Brusso Brass Quadrant Hinge HD-680
The Brusso HD-680 brass quadrant hinge is engineered with a built-in stop that allows a lid to remain open at 95°. The arc is morticed into the side of the box, beneath the leaf. The hinge is sold in pairs. Each leaf measures 1½" x 2".
This hinge ships unassembled with a link connecting the two leaves. When assembling, the end with the pin will go into your lid.
Length:...
Brusso Brass Recessed Pull CP-125
The Brusso CP-125 brass minimalist recessed pull is designed for cabinets and fine furniture. It may be either surface or flush mounted. The pull measures 1¼" in diameter.
Diameter: 1.250" - 1¼" - 32mm
Depth: 0.500" - ½" - 13mm
Brusso Brass Recessed Pull CP-150
The Brusso CP-150 brass minimalist recessed pull is designed for cabinets and fine furniture. It may be either surface or flush mounted. The pull measures 1½" in diameter.
Diameter: 1.500" - 1½" - 38mm
Depth: 0.500" - ½" - 13mm
Brusso Brass Recessed Pull CP-200
The Brusso CP-200 brass minimalist recessed pull is designed for cabinets and fine furniture. It may be either surface or flush mounted. The pull measures 2" in diameter.
Diameter: 2.000" - 2" - 51mm
Depth: 0.500" - ½" - 13mm
Brusso Brass Shelf Pin K-10
The K-10 brass shelf support pin comprises a decorative turned support and a cylindrical peg, which fits into the K-2 sleeve. The peg measures 1/4" in diameter x 3/8" deep, and the support projects 7/16". Supplied as a set of 4.
Brusso Brass Shelf Sleeves K-2
The K-2 brass heavy-walled shelf support sleeve is mortised flush into the side of a case, providing an anchor for the K-10 shelf support pin. The sleeve measures 3/8" in diameter x 7/16" deep. Supplied as a set of 12.
Brusso Brass Side Rail Hinge SR-638
The Brusso SR-638 brass square knuckled full mortice side rail hinge is engineered with a built-in stop that allows a lid to remain open at a 95° angle. These hinges are milled from 1/4" thick solid brass stock to precise dimensions and are designed to last a lifetime. They feature stainless steel hinge pins and the standard Brusso burnished finish. The leaf measures 5/16" wide x 1-3/8"...
Brusso Brass Side Rail Hinge SR-680
The Brusso SR-680 brass square knuckled full mortice side rail hinge is engineered with a built-in stop that allows a lid to remain open at a 95° angle. These hinges are milled from 1/4" thick solid brass stock to precise dimensions and are designed to last a lifetime. They feature stainless steel hinge pins and our standard Brusso burnished finish. The leaf measures 1/2" wide x 2"...
Brusso Brass Stop Hinge JB-101
The Brusso JB-101 brass square knuckled full mortice butt hinge is engineered with a built-in stop that allows a lid to remain open at 95°. It is milled from heavy brass stock and can be used when an additional stay is not desired. The leaf measures ¾" in length.
Length: 0.750" - 3/4" - 19mm
Width: 0.495" - 1/2" - 12mm
Thickness: 0.187" - 3/16" -...
Brusso Brass Stop Hinge JB-102
The Brusso JB-102 brass square knuckled full mortice butt hinge is engineered with a built-in stop that allows a lid to remain open at 95°. It is milled from heavy brass stock and can be used when an additional stay is not desired. The leaf measures 1¼" in length.
Length: 1.250" - 1¼" - 32mm
Width: 0.495" - 1/2" - 12mm
Thickness: 0.187" - 3/16"...
Brusso Brass Stop Hinge JB-103
The Brusso JB-103 brass square knuckled full mortice butt hinge is engineered with a built-in stop that allows a lid to remain open at 95°. It is milled from heavy brass stock and can be used when an additional stay is not desired. The leaf measures 1¼" in length.
Length: 1.250" - 1¼" - 32mm
Width: 0.618" - 5/8" - 16mm
Thickness: 0.187" - 3/16"...
Brusso Brass Stop Hinge JB-804
The Brusso JB-804 brass full mortice hinge is engineered with a built-in stop that allows a lid to remain open at 95°. The hinge is surface mounted and can be used when an additional stay is not desired. The hinge measures 1¼" in length.
Length: 1.250" - 1¼" - 32mm
Width: 1.040" - 1" - 26.5mm
Thickness: 0.188" - 3/16" - 5mm
NOTE - All Brusso...
Brusso Jig TJ-101
For Brusso Stop Hinges JB101 and Butt Hinges CB301 (with or without ball finials).
Brusso Jig TJ-680
For Brusso quadrant hinges HD680.
Brusso Jig TJ-702
Compatible with Brusso HD-702
Brusso Jig TJ-804
Compatible with Brusso JB-804 and JB-804S
Brusso Stainless Ball Catch BC-263S
The Brusso BC-263S stainless-steel morticed ball catch, consisting of a stainless-steel cylinder with spring-loaded steel ball and a stainless-steel keeper, is used to secure cabinet doors. Stainless steel gives the ball catch a modern look and does not tarnish, making it suitable for kitchen, bathroom, and marine applications. The grooved sides of each half, measuring 1/4" in diameter, provide...
Brusso Stainless Ball Catch BC-275S
The Brusso BC-275S stainless-steel morticed ball catch, consisting of a stainless-steel cylinder with spring-loaded steel ball and a stainless-steel keeper, is used to secure cabinet doors. Stainless steel gives the ball catch a modern look and does not tarnish, making it suitable for kitchen, bathroom, and marine applications. The grooved sides of each half, measuring 7/16" in diameter, provide...
Brusso Stainless Hook MC-437S
The Brusso MC-437S Stainless Steel Hook is a premium hardware piece designed for modern and marine applications. Featuring a flattened dome face with a band-shaped edge, this hook is pressure-fit and glued into place, ensuring a secure and stylish finish. Its stainless steel construction ensures durability and resistance to tarnishing.
Diameter: 3/8"
Projection: 15/16"
Mounting...
