Sort By
Per Page
View
Grid
List
Flexcut 1'' Mini Draw Knife KN17
This miniature draw knife by Flexcut is designed for hard-to-reach areas, where a pulling action is more conducive to efficient stock removal. The flexible shank allows the cutting angle to be changed easily for contoured cuts.
Made in the USA by Flexcut.
Flexcut 1/8' (3mm) Scorp KN21
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available.
Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself. 3 additional profiles available.
Flexcut 10 pc. Deluxe Mallet Tool Set MC100
This 10 pc. Deluxe Mallet Set is quite versatile with gouges ranging from 1/8" for detail to 1" for hogging off large amounts of waste wood. These tools can be used by hand or can be struck with a mallet and will suit the needs of both novice and advanced carvers.
Mallet Tools included: MC203 #3 x 1/2", MC403 #3 x 1", MC505 #5 x 1-3/16", MC307 #7 x 11/16", MC309 #9 x 1/2", MC511 #10 x 3/4",...
Flexcut 11 Piece Craft Carver Set SK107
This Flexcut 11 Piece Craft Carver Set contains ten carving blades, an interchangeable ABS handle, leaf project carving blank, and an 11-pocket tool roll. Rolled up, this set is extremely portable. An owner's manual is also included with step-by-step instructions for completing the included project.
Profiles included: SK329 #1 x 1/4", SK305 #3 x 3/8", SK400 #3 x 5/8", SK401 #5 x 9/16", SK306...
Flexcut 14 Piece Power Gouge Set RG100
The Flexcut 14 Piece Power Gouge Set RG100 is an all-encompassing collection perfect for both roughing and detailing in woodworking. This versatile set includes a wide range of gouges designed to fit most reciprocating power carvers.
Included Gouges:
#3: 3/8" (RG305), 5/8" (RG400), 3/4" (RG300), 1" (RG100)
#5: 5/16" (RG306), 9/16" (RG401), 5/8" (RG301),...
Flexcut 19 Pocket Tool Roll SK200
Keep all your Flexcut tools in one convenient tool roll. Fits 18 unhandled gouges and 1 handle.
Note the tools are not included.
Flexcut 21 Piece Deluxe Starter Set SK108
This Flexcut Deluxe Starter Set has everything a new woodcarver needs. It comes with 16 interchangeable blades, two quick-connect handles - ABS and Power - and a Cutting Knife. There's also a SlipStrop, Gold Polishing Compound and an owner's manual showing how to care for the tools. Plus you'll find a FREE step-by-step, instructional DVD for a great first project.
Profiles included: SK406 #1...
Flexcut 3' Draw Knife KN25
This handy little draw knife by Flexcut was developed for fan carving but works great for skinning small areas of bark and roughing-off corners.
Made in the USA by Flexcut.
Flexcut 3/16' (5mm) Scorp KN22
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available.
Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself. 3 additional profiles available.
Flexcut 30-degree V-Tool (30°) - 5/32'' (4mm) SK413
The Flexcut SK413 30-degree V-Tool is an interchangeable blade used for wood carving. It has a 30° V-shaped edge and is 5/32'' (4mm) wide.
This unhandled V-tool is compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving.
Flexcut V-tools come in various...
Flexcut 4 pc. Mallet Tool Sculptor's Set MC175
This 4 pc. Mallet Sculptor's Set are sized for very large stock removal. Their handle diameter and steel caliper are twenty percent larger for heavy duty projects. Carousel carvers, chainsaw carvers and those doing life size statuary will find these tools very fast for knocking out rough shapes or smoothing out large areas. These tools can be used by hand or can be struck with a mallet.
Mallet...
Flexcut 45-degree V-Tools (45°)
The Flexcut 45-degree V-Tools are interchangeable blades with a 45° V-shaped edge used for wood carving. These unhandled V-tools are compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving.
Available Widths:
1mm (micro) SK803
5/32'' (4mm) SK317
1/4''...
Flexcut 5 Piece Craft Carver Set SK106
This Flexcut 5-Piece Craft Carver Set comes with four carving blades, a quick connect ABS handle, leaf project carving blank, and an 11-pocket tool roll. An owner's manual is also included with step-by-step instructions for completing the included project.
Profiles included: SK305 #3 x 3/8", SK306 #6 x 5/16", SK801 #9 x 1.5mm, SK307 70 deg. x 1/4".
Flexcut 5 Piece Lino & Relief Printmaking Set SK130
This Flexcut 5 piece Printmaking Set contains 4 carving blades, a quick connect ABS handle, 11 pocket tool roll, as well as a custom strop and polishing compound.
Relief printing is based on a reductive process - carve the non image away from a flat, level surface and ink the remaining top surface with a roller or brayer in order to print the image.
Profiles included:
SK306 #6 x 5/16''
SK309...
Flexcut 5'' Flexible Draw Knife KN16
This flexible Flexcut draw knife has 5 inches of workable edge, designed to flex around contours where large amounts of stock need to be removed quickly. The tool can be flexed to accommodate concave or convex surfaces. Cuts can be made that conform more closely to the finished shape, taking less time to sand or scrape.
The curved edge gives a skew-like cutting action for a low resistance cut. This...
Flexcut 5/16'' (8mm) Scorp KN23
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available.
Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself. 3 additional profiles available.
Flexcut 6 pc. Mallet Tool Starter Set MC150
This 6 pc. Mallet Starter Set is a good sampling of tools to get started on simpler projects. These tools can be used by hand or can be struck with a mallet and will suit the needs of advanced and novice carvers.
Mallet Tools included: MC403 #3 x 1", MC305 #5 x 11/16", MC208 #7 x 7/16", MC311 #11 x 1/4", MC411 #10 x 9/16", MC360 60 deg. x 3/8".
Flexcut 60-degree Soft-V Tool (60°) - 1/2'' (12mm) SK760
The Flexcut SK760 60-degree Soft-V Tool is an interchangeable blade used for wood carving. It has a 60° Soft-V-shaped edge and is 1/2'' (12mm).
This unhandled V-tool is compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving.
Flexcut V-tools come in various...
Flexcut 70 deg. Scorp KN24
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available.
Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself. 3 additional profiles available.
Flexcut 70-degree V-Tools (70°)
The Flexcut 70-degree V-Tools are interchangeable blades with a 70° V-shaped edge used for wood carving. These unhandled V-tools are compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving.
Available Widths:
1/8'' (3mm) SK603
1/4'' (6mm)...
Flexcut 90-degree V-Tool (90°) - 5/8'' (15mm) SK706
The Flexcut SK706 90-degree V-Tool is an interchangeable blade used for wood carving. It has a 90° V-shaped edge and is 5/8'' (15mm) wide.
This unhandled V-tool is compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving.
Flexcut V-tools come in various...
Flexcut Beginner Palm & Knife Set KN600
The Flexcut beginner palm and knife set is a great way to get started in this rewarding craft. It includes the most popular palm tools and knives from the Flexcut range.
Each tool is supplied razor sharp and ready for use. Set includes: KN12 Cutting Knife, KN13 Detail Knife, FR307 V-Tool and FR306 Gouge.
Flexcut Beginners 2 Blade Craft Carver Set SK111
The Flexcut Beginner 2 Blade Craft Carver Set has everything needed to tackle a first time project. It comes with two carving blades - a V-Tool and Gouge - plus an interchangeable ABS handle. A basswood blank for the leaf carving project and a second blank for practising cuts are included. There is also a project DVD with step-by-step visual instructions as well as a 24 page owner's manual that...
Flexcut Beginners 3 Blade Craft Carver Set SK110
This Flexcut Beginner 3 Blade Craft Carver Set includes everything you'll need to get started in the rewarding world of woodcarving. A basswood, cowboy boot blank, three carving blades, and an interchangeable Palm handle are included.
You also receive a project DVD with visual instructions as well as a 16 page project guide.
Profiles included:
SK407 #2 x 9/16''
SK408 #11 x 1/4''
SK307...
Flexcut Beginners Palm Set FR310
This very popular Flexcut set is great for those just getting started or those with more experience who like to carve smaller sized projects. The handle fits comfortably in the palm, allowing for good control close to your work. The five profiles can perform a variety of tasks and carve moderate detail.
Palm Tools included: FR308 #2 x 5/16", FR305 #3 x 3/8", FR306 #6 x 5/16", FR309...
Flexcut Bosch Adaptor SK105
This adaptor is for the BOSCH (SKIL) power carver and accepts all the flexcut SK range of carving tools.
Flexcut Carvin' Jack 2.0 JKN291
The Flexcut Carvin' Jack® 2.0 is the first folding multi-tool designed specifically for the needs of woodcarvers. At 4.4 oz and a closed length of 4 1/4", this jackknife features 6 blade profiles.
The 2.0 version has a new cross-etched, aerospace aluminium handle. Flexcut have also replaced the chisel blade with a pelican knife to provide greater versatility.
Blades included: Detail...
Flexcut Chip Carving Knife KN15
This is Flexcut's traditional chip carving knife. It is honed, polished and ready to carve.
Flexcut Chip Carving Set KN115
Flexcut's Chip Carving Set is everything you need to create the intricate geometric or freestyle patterns that are the hallmark of the chip carving craft. Lettering is also very much part of the art form - carving the name of somebody special on the boxes, address blocks, wall plaques and other objects you make, turns them into very personal keepsakes that can be cherished and even handed down...
Flexcut Cutting Knife KN12
The Flexcut Cutting Knife is a general purpose carving knife. Its more rounded point is very durable. Great beginners knife. 1-1/8" blade length.
Flexcut Deluxe Knife Set KN250
The Flexcut Deluxe Knife Set features a most extensive collection of fixed blade carving knives to give carvers a wide range of capabilities in one economical package. This set includes 18 razor sharp carving knives designed for roughing to very detailed carving projects.
Knives included:
KN11 Skew Knife,
KN12 Cutting Knife,
KN13 Detail Knife,
KN14 Roughing Knife,
KN15 Chip Carving Knife,...
Flexcut Deluxe Palm & Knife Set KN700
The Flexcut Deluxe Palm & Knife Set brings together two popular tool sets to give woodcarvers a wide range of capabilities in one economical package. Each tool is supplied razor sharp and ready for use.
Nine piece set includes: KN12 Cutting Knife, KN13 Detail Knife, KN18 Pelican Knife, KN27 Mini Detail Knife, FR307 6mm V-Tool, FR306 8mm Gouge, FR305 9mm Gouge, FR308 8mm Flat Blade and FR309...
Flexcut Deluxe Palm Set FR405
This Flexcut set is a combination of the FR310 and FR404 palm sets. The regular palm for detail and the wide format for roughing-out makes this a great collection in one convenient box.
Palm Tools included: FR308 #2 x 5/16", FR305 #3 x 3/8", FR400 #3 x 5/8", FR401 #5 x 9/16", FR306 #6 x 5/16", FR402 #8 x 3/8", FR309 #11 x 1/8", FR307 70 deg. x 1/4", FR403 70 deg. x 3/8".
Flexcut Detail Jack JKN90
The Flexcut Detail Jack can handle a variety of projects start to finish. Its single detail knife quickly removes wood from convex surfaces, while its fine point is perfect for detailing delicate areas.
The Pistol Grip handle design is crafted from aerospace-grade aluminium and is ergonomically designed to allow a strong grip for long periods of carving with minimal hand fatigue.
Flexcut Detail Knife KN13
The Flexcut Detail Knife has a very fine point for making the very narrow cuts associated with detailing. Its straight 1½" blade can accommodate larger stock removal if needed.
Flexcut Detail Knife Set KN400
The Flexcut Detail Knife Set contains 3 knives and Sharpening Compound included to keep your knife blade sharp.
The three knives included are KN19, KN20 and KN27.
Flexcut Detail Skew Knife KN32
This Flexcut knife is excellent for fine eye detail and feathers when decoy carving.
14.3mm (9/16") straight blade.
The extended shank offers a deeper reach for the blade.
Flexcut Detailing Power Gouge Set RG310
These Flexcut Detailing Power Gouges are tools for smaller carving and detail.
Can be used by hand with the RG102 Handle Adaptor.
Power Gouges included:
RG305 #3 x 3/8''
RG306 #5 x 5/16''
RG309 #11 x 1/8''
RG307 70 deg. x 1/4''
Flexcut Double Bevel Skew Chisels
The Flexcut Double Bevel Skew Chisels are interchangeable blades designed for detailed wood carving. These unhandled chisels are compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving.
Available Widths:
5/16'' (8mm) SK308
9/16'' (15mm) SK407
Flexcut Double Bevel Sloyd Hook Knife KN51
The Flexcut Double Bevel Sloyd Hook Knife is ideal for carving spoons, bowls, ladles and other deep hollowed work.
It features a double-sided blade with a square, sharpened end. For added strength, the tang of each knife extends completely through the beautifully conditioned Cherry hardwood handle. It also features a brass ferrule for added stability. The overall length of this knife is 8½"...
Flexcut Double Sided Paddle Strop
Flexcut Double Sided Paddle Strop has an 10" by 3" stroppping surface on both sides. The rough leather surface is used in conjunction with the Flexcut Polishing Compound (included), the fine side is a smooth leather surface for final finishing. Ideal for larger tools / blades.
Flexcut Fine Detail Knife KN35
Designed by Flexcut for making fine detail cuts, the user also has the ability to "choke up" on the blade for even more precise cuts. The handle shape holds like a pencil or conventional knife.
Flexcut Gold Polishing Compound PW11
Flexcut Gold™ Polishing Compound has been specially formulated to apply like a crayon.
Its blend of aluminium and titanium oxide provide a balance between aggressive removal of hardened tool steel and offering a high-colour polish.
Flexcut Hip Knife KN30
The Flexcut Hip Knife is a versatile fine cutting tool that is capable of a wide range of woodcarving projects. Its high-carbon steel blade is precision machined and honed ready for use. The knife is supplied in a real leather sheath that easily attaches to your belt.
Flexcut Hook Hone PW18
The Flexcut Hook Hone is used to sharpen the inside edge of any hook knife. This sharpening tool used abrasive paper as a more aggressive solution than stropping to remove nicks and scratches from the cutting edge.
Includes 400 and 600-grit abrasive paper and an instructional guide.
Flexcut Hook Knife KN26
The Flexcut hook knife blade is curved, similar to a gouge for working in hollows with ease and fast stock removal. The handedness (right or left) is designated by pulling the tool toward you.
Flexcut Hook Strop PW17
The Flexcut Hook Strop is used to polish the inside edge of any hook knife. The inside edge needs to be polished regularly to keep it razor sharp. The Hook Strop is also used to remove the wire edge that forms after sharpening your hook knives with a Flexcut Hook Hone. A bar of Flexcut Gold Polishing Compound and an instructional guide are also included.
Flexcut Hooked Push Knife KN33
This Flexcut knife is an excellent choice for making concave, convex, and shaving cuts.
Also designed for cleaning stop cuts.
