Sort By
Per Page
View
Grid
List
Bad Axe 12" Stiletto
The Bad Axe Stiletto is a dedicated dovetail saw. You might think you need a short 8" dovetail saw to cut your finest pins, but actually the Stiletto at 12" will make for longer (and therefore fewer) cuts, which promotes more accuracy. The extra length is balanced beautifully by a shallow blade so it feels right in the hand.
Bad Axe Tool Works takes the finest materials and pairs it with...
Gyokucho Razorsaw Dozuki 240mm Rip
As recommended by David Barron for his range of dovetail guides.
Rob Cosman 3/4 Dovetail Saw
Cutting tiny dovetails (dovetails in 3/8 inch and less thick stock) is a bit challenging if using Rob's regular sized dovetail saw - it can be done, but I wanted a better saw for this application. That is why he designed his 3/4 dovetail saw. As compared to Rob's regular-sized dovetail saw, the 3/4 dovetail saw's thinner saw plate, smaller teeth, shallower depth of cut, and shorter overall...
Lie-Nielsen Dovetail Saw with Cherry Handle
Lie-Nielsen believe that their Back Saws are the finest made anywhere. They are an exact copy of a British saw made in 1830. Owning one is like having a piece of woodworking history in your shop.
Since dovetailing is a ripping operation, where the kerf is running with the grain, the Lie-Nielsen Dovetail Saw has its teeth filed to a rip profile, unlike other dovetail saws on the market today. Solid...
Lie-Nielsen Tapered Dovetail Saw with Cherry Handle
Lie-Nielsen have redesigned their three most popular back saws to feature a slight tapering of the blade from toe to heel. This taper gives you better control over precise cuts. When you reach the gauge line on the front of your stock, the blade is slightly above the line on the back side, which reduces the risk of sawing past your line. In addition, the taper introduces an angled approach to your...
Veritas Dovetail Saw
When we first saw this saw (!) we were a bit dubious but it has quickly grown on us. It is very comfortable. it is very affordable, it cuts well and can be re-sharpened. Not for the purists maybe but beauty is in the eye of the beholder. This is what those clever chaps from Veritas say about this saw....
The Veritas dovetail saw is an innovative blend of tradition and technology. It incorporates...
Veritas Fine Cut Dovetail Saw (20tpi)
The Veritas Fine Cut Dovetail Saw (20tpi) is best for stock of less than half an inch thick, this finer version of the standard Dovetail saw would complement your existing saw armoury.
The Veritas dovetail saws are an innovative blend of tradition and technology, incorporating the critical characteristics of a classic fine joinery saw but made using modern production processes and state-of-the-art...
Rob Cosman Dovetail Saw - Ebony Resin Handle
Rob describes the first of his hand saw offerings, the dovetail saw. After teaching thousands of folks to cut dovetails by hand, Rob has tailored a saw to address the most common problems. With the intent to enable woodworkers to assemble their dovetails straight from the saw this may very well be the missing link!
Unique features include:
Split lines with the Super Fine 22tpi starting tip,...
Thomas Flinn Pax 1776 Dovetail Saw
Available in lengths 8", 10" and 12" with 20tpi, in Rip (for cutting with the grain).
Blade depths are as follows:
8" Blade length = Blade depth 2"
10" Blade length = Blade depth 2"
12" Blade length = Blade depth 2 1/2"
These Pax 1776 saws are the premium range made by Thomas Flinn & Co in Sheffield, England. The dovetails saws are beautifuly...
Thomas Flinn Pax Beech Handled Dovetail & Tenon Saws
The Pax range of saws are made by Thomas Flinn & Co in Sheffield, England. They perform like the 1776 premium range, just don't have all the refinery. So instead of an open Walnut handle, these saws have a closed handle made from steamed Beech with a two-tone gloss finish. They have the same heavy brass back which is folded to give the blade its tension. If you like a heavier saw, then this...
Veritas Small Crosscut Saw
Used for cutting across or perpendicular to the grain, the 16 tpi crosscut saw blade has teeth filed with alternating bevel angles so it severs rather than tears wood fibers; it tracks better and leaves a smoother finish than a rip-cut blade. The teeth are filed with 15° rake and bevel angles and have 0.003" of set per side.
Lie-Nielsen Carcass Saw with Cherry Handle
The Carcass Saw is used for precise cuts across the grain, cutting tenon shoulders, and defining the edges of a dado.
It has 14 points per inch, filed crosscut, for cutting quickly, yet accurately and smoothly.
Blade is .020" (.5mm) thick, with a .003" (.076mm) set.
Overall length, including handle, is 19" (48.26cm), with an overall height of 4-7/8" (12.38cm).
Usable blade dimensions are 14"...
Lie-Nielsen Tapered Carcass Saw with Cherry Handle
This is the tapered version of the ever popular carcass saw. The taper gives you better control over precise cuts. When you reach the gauge line on the front of your stock, the blade is slightly above the line on the back side, which reduces the risk of sawing past your line.
The tapered saw is very similar to the standard carcass saw in size, but has a thinner plate of .015". It tapers 1/4"...
Rob Cosman Bench Crosscut Saw
Every hand-tool woodworker needs a minimum of three backsaws: Dovetail, Tenon, and Crosscut Saws. Rob has designed and manufactured two different professional crosscut saws; his Joinery Crosscut and Bench Crosscut to meet this requirement.
Both of Robs crosscut saws are specialized for crosscutting applications. The Bench Crosscut Saw is designed for general crosscutting while his Joinery Crosscut...
Veritas Crosscut Carcass Saw
The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed crosscut at 14tpi. The teeth have a rake angle of 15°, an included angle of 60° with alternate 15° bevels to efficienlty sever wood fibres rather than tear. The depth of cut is 60mm. The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid...
Veritas Rip Cut Carcass Saw
The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed for rip cutting at 12tpi. The teeth have a rake angle of 10°, an included angle of 60° for fast and accurate cutting along the line of the grain. The depth of cut is 60mm.
The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece...
Bad Axe 14" Hybrid Thin Plate Carcass Saw - The Bayonet
The ''Bayonet'' - yet another strange name from Bad Axe Tool Works, but don't let that put you off. This carcass saw will excel at virtually any carcase joinery you throw at it. The hybrid-cut filing gives you a saw that will give you plenty of opportunities to put it to good use.
Bad Axe Tool Works takes the finest materials and pairs it with great craftsmanship to produce...
Rob Cosman Joinery Crosscut Saw - Ebony Resin Handle
Unique features of Rob’s joinery crosscut saw include;
with only .002 set per side this 15tpi saw will slice through wood and leave a ready-to-join surface, right out of the box!
you have a choice, we saw, shape, sand and buff to a satin finish, "ebony resin" composite handles with carved finger recesses for extra comfort and control.
the extra heavy brass back provides perfect...
Thomas Flinn Pax 1776 Tenon Saws
Available in lengths 10" and 12" with 13 or 15 tpi, in either Rip (for cutting with the grain) or Crosscut (for cutting across the grain) formation.
Blade depths are as follows:
10" Blade length = Blade depth 2"
12" Blade length = Blade depth 2 1/2"
These Pax 1776 saws are the premium range made by Thomas Flinn & Co in Sheffield, England. The tenon saws are...
Lie-Nielsen 16" Tenon Saw with Cherry Handle
A Tenon Saw is a large backsaw used for making deep, accurate cuts in furniture joinery. It should make straight, fast cuts without binding. Based on a classic Henry Disston model from the early 20th century, our Tenon Saws have Cherry handles, Brass fittings, and stout ¾" x ¼" milled Brass backs. These saws are solid, well balanced and smooth cutting. Filed rip for cutting...
Lie-Nielsen Tapered Tenon Saw with Cherry Handle
Lie-Nielsen have redesigned their three most popular back saws to feature a slight tapering of the blade from toe to heel. This taper gives you better control over precise cuts. When you reach the gauge line on the front of your stock, the blade is slightly above the line on the back side, which reduces the risk of sawing past your line. In addition, the taper introduces an angled approach to your...
Rob Cosman Large Tenon Saw - Rip Cut - Ebony Resin Handle
Unique features include;
Start the kerf easily with the Super Fine 20 tpi starting tip, then gain the speed you need for heavy cuts with the 12 tpi blade - we eased the angle of the cutting face a few degrees to reduce the grabbing that accompanies larger saw teeth.
Very slight .002” (per side) set makes for dead straight saw cuts and smooth ready to glue surfaces - the blade is 12 inches...
Veritas Tenon Saws
The unique designs of the Veritas carcass saws and dovetail saws have proved to be extremely popular and Veritas have now introduced two superb tenon saws to complement their range. They combine the best characteristics of this fine classic joinery saw with those of state-of-the-art materials and construction methods.
The tooth pattern on the thin high-carbon steel blade provides a good balance...
Thomas Flinn Pax Hand Saws
Handcrafted of the finest alloy steel these saws are taper ground and breasted (meaning less teeth are in contact with the wood and therefore less friction) and are precisely set and sharpened by hand to ensure the best possible cut without binding. The handle is made from the finest steamed beech with a two-tone gloss finish.
With a variation of teeth sizes, there is a Handsaw for every type of...
Bad Axe Frame Saw and Kerfing Plane Hardware Kit (no wood)
What's included.....
30 1/2" Saw Plate and 10" Kerfing Plane Plate. Blue Tempered 1095 Spring Steel. Hammer-set and sharpened by hand.
Two brackets (with kerf pre-cut), one of which is tapped for the 3/8" eye bolt.
3" x 3/8" eyebolt with jam nut.
Striker Plate with fastening screws.
Two U-bolts to secure plate to brackets.
''All you have to do is cut and form the wooden components.''
Knew Concepts 5'' Fret Saw with Screw Tension
The screw tension saw was the origin of the Knew Concepts Fret saw line. It is the economy model. It provides extremely precise blade tensioning simply by turning the knurled tension nut at the top of the frame.
Saws come with a dozen Pegas Skip #7 Tooth blades (15 TPI).
Knew Concepts Mk.IV Heavy Duty Fret Saw with Lever Tension
The Knew Concepts Mk. IV saws are designed to pull 50-60lbs of tension on their blades, which makes it much stronger, and the blades vibrate less than the standard saws. These saws are are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red and is extremely scratch and damage resistant.
The Cam Lever Tension is designed for...
Knew Concepts Mk.IV Heavy Duty Fret Saw with Lever Tension & Swivel Blade Clamps
The Knew Concepts Mk. IV Fret Saws are designed to pull 50-60lbs of tension on their blades, which makes it much stronger, and the blades vibrate less than the standard saws. They are are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red, with a laser engraved logo and is extremely scratch and damage resistant.
The Cam Lever...
Knew Concepts 6 1/2'' Coping Saw
On the Knew Concepts Coping Saw the blade is tensioned by a cam-lever and pulls so taut that the blade "sings" when plucked. Chris Schwarz said "...it's more like sawing with an unbendable wire than a floppy steel hotdog (which is what is typical of most saws)". Make turns that are tighter than ever before.
The solid steel indexing blade-hooks lock in eight 45° positions...
Knew Concepts Birdcage Titanium Fret Saw with Lever Tension
The Knew Concepts Birdcage Titanium Fret Saw is the strongest, most rigid Fret Saw available on the market today! Its spine is a welded titanium beam, the blade is tensioned with a Lever that can tension blades so tight they "ping" with notes never heard before, makes turns that are tighter than ever before, and the blade clamps lock at 45° left, 0°, 45° right.
Saws come with...
Knew Concepts Slip-on Foam Comfort Grip
The foam grips are available only for the Knew Concepts Mk.III, Mk.IV, and titanium hand saws.
The simplest way to reduce the stress on your hands of long hours of sawing is to increase the diameter of the saw’s handle.
This is where the Knew Concepts new Comfort Grips come in: they increase the diameter of the saw’s handle without adding weight, while they also make the handle...
Classic Series - Japanese Saw Set (4 saws)
Set of 4 Japanese Saws in linen roll:
Ryoba 240mm
Kataba 220mm
Kataba 300mm
Doziki 240mm
Gyokucho 293 Compact Kataba Atsuba 180mm
Full Name : Gyokucho Razorsaw Compact Kataba Atsuba.
Blade Length : 180mm.
Overall Length : 390mm.
Max Cutting Depth : N/A.
Teeth Pitch / TPI : 1.5mm / 16.9
Blade Thickness : 0.5mm.
Cutting Width : 0.81mm.
Teeth Pattern : Crosscut with some rip cut teeth.
Gyokucho Product Number : 293.
Weight : 160g.
Replacement Blade : S293
The compact range of saws can do much the same...
Gyokucho 295 Compact Jushi 180mm Rip
Full Name : Gyokucho Razorsaw Compact Jushi.
Blade Length : 180mm.
Overall Length : 390mm.
Max Cutting Depth : 45mm.
Teeth Pitch / TPI : 1.5mm / 16.9
Blade Thickness : 0.3mm.
Cutting Width : 0.52mm.
Teeth Pattern : Rip cut with some crosscut teeth.
Gyokucho Product Number : 295.
Weight : 155g.
Replacement Blade : S295
The compact range of saws can do much the same as the...
Gyokucho 297 Compact Dozuki 180mm Crosscut
Full Name : Gyokucho Razorsaw Compact Dozuki.
Blade Length : 180mm.
Overall Length : 390mm.
Max Cutting Depth : 45mm.
Teeth Pitch / TPI : 1.0mm / 25.4
Blade Thickness : 0.3mm.
Cutting Width : 0.46mm.
Teeth Pattern : Crosscut.
Gyokucho Product Number : 297.
Weight : 170g.
Replacement Blade : S297
The compact range of saws can do much the same as the full size saws, just...
Gyokucho Compact Series Set of 4
All 4 of the Gyokucho Razorsaw Compact Series.
#291 Compact Ryoba.
#293 Comapct Kataba Atsuba.
#295 Compact Jushi.
#297 Compact Dozuki.
Gyokucho Compact Set of 2 (Atsuba & Jushi)
The compact Kataba Atsuba (#293) which is crosscut capable of starting cuts in the middle of a board, and the Jushi (#295) which is ideal for rip cuts when dovetailing.
Gyokucho Compact Set of 2 (Ryoba & Jushi)
The all-rounder compact Ryoba (#291) which is double sided, and the Jushi (#295) which is ideal for rip cuts when dovetailing.
Gyokucho Dozuki Cross & Rip Bundle - Rattan
The Dozuki 240mm Crosscut #371 and Rip Cut #372 saws with a traditional rattan handle.
Gyokucho Dozuki Cross & Rip Bundle - TPE
The Dozuki 240mm Crosscut #371 and Rip Cut #372 saws with the TPE (rubber) handle.
Gyokucho Kataba Proton Power Saw 240mm
Full Name : Gyokucho Razorsaw Kataba Proton Power.
Blade Length : 240mm.
Overall Length : 540mm Rattan / 550mm TPE.
Max Cutting Depth : N/A.
Teeth Pitch / TPI : 1.9mm / 13.4
Blade Thickness : 0.6mm.
Cutting Width : 0.9mm.
Teeth Pattern : Crosscut.
Gyokucho Product Number : 400 Rattan / 400T TPE.
Weight : 185g Rattan / 240g TPE.
Replacement Blade : S400
A really robust crosscut...
Gyokucho Razorsaw 291 Compact Ryoba 180mm
Full Name : Gyokucho Razorsaw Compact Ryoba.
Blade Length : 180mm.
Overall Length : 390mm.
Max Cutting Depth : N/A.
Teeth Pitch / TPI : Crosscut 1.5mm / 16.9. Rip Cut 3.7-2.7mm / 8-9.
Blade Thickness : 0.5mm.
Cutting Width : 0.81mm.
Teeth Pattern : Crosscut & Rip Cut.
Gyokucho Product Number : 291.
Weight : 160g.
Replacement Blade : S291
The compact range of saws can...
Gyokucho Razorsaw Dozuki 240mm Crosscut
Full Name : Gyokucho Razorsaw Dozuki.
Blade Length : 240mm.
Overall Length : 595mm Rattan / 575mm TPE.
Max Cutting Depth : 65mm.
Teeth Pitch / TPI : 1.0mm / 25.4
Blade Thickness : 0.3mm.
Cutting Width : 0.46mm.
Teeth Pattern : Crosscut.
Gyokucho Product Number : 371 Rattan / 374 TPE.
Weight : 240g Rattan / 285g TPE.
Replacement Blade : S371
A very useful crosscut saw with...
Gyokucho Razorsaw Seiun Saku Ryoba 240mm
Full Name : Gyokucho Razorsaw Seiun Saku Ryoba.
Blade Length : 240mm.
Overall Length : 575mm Rattan / 555mm TPE.
Max Cutting Depth : N/A.
Teeth Pitch / TPI : Crosscut 1.7mm / 14.9. Rip Cut 3.8-2.4mm / 6.7-10.6.
Blade Thickness : 0.5mm.
Cutting Width : 0.83mm.
Teeth Pattern : Crosscut & Rip Cut.
Gyokucho Product Number : 610 Rattan / 661 TPE.
Weight : 200g Rattan / 265g TPE.
Replacement...
Gyokucho Razorsaw Seiun Saku Ryoba 300mm
Full Name : Gyokucho Razorsaw Seiun Saku Ryoba.
Blade Length : 300mm.
Overall Length : 695mm Rattan / 675mm TPE.
Max Cutting Depth : N/A.
Teeth Pitch / TPI : Crosscut 3.0mm / 8.5. Rip Cut 5.6-3.5mm / 4.5-7.3.
Blade Thickness : 0.7mm.
Cutting Width : 1.10mm.
Teeth Pattern : Crosscut & Rip Cut.
Gyokucho Product Number : 616 Rattan / 664 TPE.
Weight : 350g Rattan / 415g TPE.
Replacement...
Gyokucho Razorsaw Seiun Saku Ryoba Komame (Fine) 240mm
Full Name : Gyokucho Razorsaw Seiun Saku Komame Ryoba.
Blade Length : 240mm.
Overall Length : 575mm Rattan / 555mm TPE.
Max Cutting Depth : N/A.
Teeth Pitch / TPI : Crosscut 1.3mm / 19.5. Rip Cut 3.8-2.4mm / 6.7-10.6.
Blade Thickness : 0.45mm.
Cutting Width : 0.73mm.
Teeth Pattern : Crosscut & Rip Cut.
Gyokucho Product Number : 611 Rattan / 662 TPE.
Weight : 215g Rattan /...
Gyokucho Razorsaw Tatebiki Noko 240mm
Full Name : Gyokucho Razorsaw Tatebiki Noko.
Blade Length : 240mm.
Overall Length : 530mm Rattan / 540mm TPE.
Max Cutting Depth : 45mm.
Teeth Pitch / TPI : 1.5mm / 16.9
Blade Thickness : 0.3mm.
Cutting Width : 0.52mm.
Teeth Pattern : Rip.
Gyokucho Product Number : 303 Rattan / 304 TPE.
Weight : 195g Rattan / 255g TPE.
Replacement Blade : S303
A very versatile rip dovetail...
Gyokucho Razorsaw ZA 240mm
Full Name : Gyokucho Razorsaw ZA.
Blade Length : 240mm.
Overall Length : 535mm Rattan / 540mm TPE.
Max Cutting Depth : 55mm.
Teeth Pitch / TPI : 1.5mm / 16.9
Blade Thickness : 0.3mm.
Cutting Width : 0.51mm.
Teeth Pattern : Crosscut.
Gyokucho Product Number : 306 Rattan / 307 TPE.
Weight : 185g Rattan / 240g TPE.
Replacement Blade : S306
A very useful crosscut saw with a...