Sort By
Per Page
View
Grid
List
New Veritas Micro-Adjust Wheel Marking Gauge
Veritas have refined and redesigned their ever popular wheel marking gauges. This new micro-adjust wheel marking gauge draws on two decades of manufacturing experience, with subtle improvements across the board.
The adjustment mechanism built into the stainless-steel rod is intuitive to use. After setting the approximate projection, you can fine-tune the position of the cutter within a range of...
Veritas Micro Adjust Marking Gauge
The Veritas wheel marking gauge is a great workhorse and excellent value. Its popularity led to the development of a second model that incorporates a micro-adjust feature. It is similar to our standard wheel marking gauge with an anodized aluminium body, brass face, stainless-steel rod and internal O-ring to keep a constant light friction force on the rod. It differs in that the body is slightly...
Veritas Dual Marking Gauge
The Veritas Dual Marking Gauge has two independently adjustable rods, which will allow you to set two measurements at once, so you can quickly alternate between them when transferring or marking repetitive dimensions. Projection up to 5-3/4" is easy to set, since an internal O-ring keeps light but constant friction on each rod; a thumbscrew firmly locks rods in place.
Like other Veritas marking...
Veritas Standard Marking Gauge
Standard Gauge - pretty much the same construction as the micro adjust but these are slighly shorter at 6" and do not have the micro adjust feature.
Tite-Mark Standard
The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen.
The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head.
The Tite-Mark Standard (7" long shaft) is built around a 5/16"...
Tite-Mark Long
The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen.
The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head.
Joseph Marples Trial 1 - Combined Marking & Mortice Gauge
The Joseph Marples Trial 1 Screwslide Marking and Mortice Gauge has a full 1/8" thick brass face.
The stock is locked on to the stem by brass knurled thumbscrew and protective pressure pad. The locking screw is set within a traditional brass protective shield.
A screw slide gives fine and precise adjustment of the mortice pins and on the back of the stem is a single marking gauge pin.
Veritas Miniature Marking Gauges
These are fully working versions of the Veritas wheel marking and dual marking gauges, but only one third of the size. Their smaller scale allows greater control and makes these exquisite tools perfect for small marking tasks that require a delicate touch. Each is 57mm long and weighs just over 14g and 21g respectively.
Like their full-size counterparts, they cut (not tear) fibres for clear marks...
Replacement Blade for Tite-Mark Marking Gauge
Replacement Blade for Tite-Mark Standard and Long Marking Gauges.
Tite-Mark - Mortice Blades (pair)
Pair of Mortice Blades for laying out mortices for Tite-Mark Standard and Long Marking Gauges
Tite-Mark Extensions
A pair of extension rods to fit the Tite-Mark Standard. One 3" (7.62cm) and one 6" (15.24cm) extension rod may be used individually or joined together to extend the reach of the Titemark an extra 9" (22.86cm) by being screwed onto the blade end.
Tite-Mark Fixed Width Mortice Blade Set
Tite-Mark fixed width mortice blades - set of 4 with hex key.
1/2", 3/8", 5/16" and 1/4" for Tite-Mark Standard and Long Marking Gauges
Veritas Carpenter's Gauge
Specifically designed to be carried in an apron or pocket, this is both a direct-reading compass and a marking gauge, two things that carpenters frequently need but find hard to carry.
It has a rotatable head, which locks vertically for use and horizontally for storage and tip protection. It is direct reading, both for radius and diameter, in inches and centimetres. If you have ever measured a...
Tite-Mark Scoring Blade
Tite-Mark scoring blade for deep marking, slicing veneer strips and other general scoring tasks for the Tite-Mark Standard and Long Marking Gauges
Veritas Marking Gauge Replacement Wheel
Replacement wheel for Veritas gauges. Not suitable for the new style micro-adjust marking gauge.
Veritas Marking Gauge Replacement Wheel - (Inside)
Replacement wheel for the Dual Marking gauges. Both the Inside and Outside cutters are required for the Dual Marking gauge.
Veritas Marking Gauge Replacement Wheel - (Outside)
Replacement wheel for the new style Micro-adust and Dual Marking gauges. Both the Inside and Outside cutters are required for the Dual Marking gauge.
Veritas Marking/Mortice Gauge Heads
Though designed for use with their Veritas® Wheel Marking Gauges, these gauge heads are a simple retrofit for any marking gauge with a 5/16" diameter shaft.
Made from carbon steel, the 5/8" diameter wheel cutters will scribe at any point in their circumference and slice rather than tear fibers for clean, accurate cuts. The single-bevel cutters are usable in-line for marking parallel lines, or...
Veritas Micro-Adjust Rod for Wheel Marking Gauges
We offer the micro-adjust rod separately from the gauge body to let you easily upgrade a Veritas standard wheel marking gauge you own with the new adjustment mechanism.
Veritas Shaft Clamp for Dual Marking Gauge
On occasions, it may an advantage to lock the relative position of the two rods on the Veritas® Dual Marking Gauge, such as when a project requires a constant mortise size, but different offsets. The shaft clamp lets you lock the relative position of the cutters while still being able to adjust the fence for offset. This allows you to preserve identical mortise or tenon sizing when joining parts...
Crucible Bench Square
The Crucible Bench Square is a handy, lightweight and accurate tool that's useful for many woodworking operations. Based on an 18th-century square in A.J. Roubo's masterpiece, "l'Art du menuisier", this version uses modern technology to ensure it is accurate and stays that way.
The Bench Square is great for checking a board's edge when planing joints for a panel glue-up....
Crucible Centre Square
The steel centre square from Crucible Tool.
3-1/4'' (82mm) long x 1-5/8'' (16mm) wide x almost 3/8'' (9.5mm) thick overall. The working area of the blade is 2-7/16'' (62mm) long and includes a 1/8'' (3mm) hang hole. It is ideal for chairmakers or turners who need to mark the centers of spindles or sticks for turning or shaving.
Using the tool is simple....
Joseph Marples Trial 1 - 10" Mitre Square
The Joseph Marples Trial 1 Double Brass Faced Mitre Square is a tool based on designs that were last made over 70 years ago which were marked with the Trial 1 brand or corporate mark.
This high quality Mitre Square has a blade length of 10" (250mm) which is made from chemically blacked spring steel.
This Mitre Square is made from either Walnut or Rosewood and has four brass diamond rivets...
Joseph Marples Trial 1 - 12" Try Square
The Joseph Marples Trial 1 12" Try Squares have 1/8" thick machined brass on both the inside and outside faces, thus ensuring accuracy on the inside and outside edges.
They have a chemically blacked spring steel blade, secured to the stock with brass diamond washers and steel rivets. The accuracy of the try squares is well within that required by BS3322.
Joseph Marples Trial 1 - 6" Try Square
The Joseph Marples Trial 1 6" squares have 1/8" thick machined brass on both the inside and outside faces, thus ensuring accuracy on the inside and outside edges.
They have a chemically blacked spring steel blade, secured to the stock with brass diamond washers and steel rivets. The accuracy of the try squares is well within that required by BS3322.
Joseph Marples Trial 1 - 9" Try Square
The Joseph Marples Trial 1 9" squares have 1/8" thick machined brass on both the inside and outside faces, thus ensuring accuracy on the inside and outside edges.
They have a chemically blacked spring steel blade, secured to the stock with brass diamond washers and steel rivets. The accuracy of the try squares is well within that required by BS3322.
Lee Valley Small Double Square
This is an excellent tool for precise layout work and machinery set-up. Made entirely from stainless steel, the square includes two 2 1/2'' long rules with etched and black-filled markings for legibility.
The standard rule is graduated on one face in 32nds and 64ths. The narrow (0.2'' thick) rule, with a 1/2'' long probe on one end, is designed for access into confined spaces,...
PEC Tools 12' Solid Square
The PEC Tools 2" Solid Square has a 2" long blade. The length of blade is measured from inner edge of the beam to the end of the blade.
The solid squares have true right angles; both inside and out. (Squareness within 0.0010").
They are made from high quality harden tool steel and the beams and blades are precision ground and hardened.
Made in the USA
PEC Tools 2' Solid Square
The PEC Tools 2" Solid Square has a 2" long blade. The length of blade is measured from inner edge of the beam to the end of the blade.
The solid squares have true right angles; both inside and out. (Squareness within 0.0006").
They are made from high quality harden tool steel and the beams and blades are precision ground and hardened.
Made in the USA
PEC Tools 3' Solid Square
The PEC Tools 3" Solid Square has a 3" long blade. The length of blade is measured from inner edge of the beam to the end of the blade.
The solid squares have true right angles; both inside and out. (Squareness within 0.0006").
They are made from high quality harden tool steel and the beams and blades are precision ground and hardened.
Made in the USA
PEC Tools 4' Solid Square
The PEC Tools 4" Solid Square has a 4" long blade. The length of blade is measured from inner edge of the beam to the end of the blade.
The solid squares have true right angles; both inside and out. (Squareness within 0.0006").
They are made from high quality harden tool steel and the beams and blades are precision ground and hardened.
Made in the USA
PEC Tools 6' Solid Square
The PEC Tools 6" Solid Square has a 6" long blade. The length of blade is measured from inner edge of the beam to the end of the blade.
The solid squares have true right angles; both inside and out. (Squareness within 0.0006").
They are made from high quality harden tool steel and the beams and blades are precision ground and hardened.
Made in the USA
PEC Tools 9' Solid Square
The PEC Tools 9" Solid Square has a 9" long blade. The length of blade is measured from inner edge of the beam to the end of the blade.
The solid squares have true right angles; both inside and out. (Squareness within 0.0008").
They are made from high quality harden tool steel and the beams and blades are precision ground and hardened.
Made in the USA
Shinwa 45° Mitre Square - Metric
Stainless steel mitre square.
Measurements on both sides
Angular accuracy 45° & 135°: 0.2 mm or less per 100 mm
Base length: 115mm
Shinwa 45° Mitre Square with 90° Guide - Metric
Stainless steel mitre square.
Measurements on both sides
Angular accuracy 45°, 90° & 135°: 0.2 mm or less per 100 mm
Base length: 115mm
Shinwa 90° Try Square - Metric
Stainless steel square.
Measurements on both sides
Angular accuracy 90°: 0.1 mm or less per 100 mm
Outside measurements: 150mm
Inside measurements: 120mm
Base length: 100mm
Shinwa Combination Square 45°, 90° & 135° - Metric
Shinwa Combination Metric Square made of stainless steel includes a mitre gauge and square.
Measurements on both sides
Angular accuracy 45° & 135°: 0.2 mm or less per 100 mm
Angular accuracy 90°: 0.1 mm or less per 100 mm
Base length: 163mm
Sterling Tool Works Combination Rules - Metric/Imperial
Many have combination squares, they are usually second hand or heirlooms that have been passed down in the family. In many instances the rules are corroded and treatments to removed the rust leave them shiny and more difficult to read. Sterling Tool Works is now offering Premium replacement rules that are precision made in the USA. The rules are chemically etched, etchings blackened, tempered and satin...
Sterling Tool Works Dovetailing Square
The re-designed Sterling Tool Works Dovetail Square is an excellent tool to help diagnose potential issues with your Dovetails before they become gaps in your assembled Joint. The Heart of this tool is the Sterling Dovetail Rule and was inspired by pattern makers squares that have been around for decades. Sterling Tool Works designed the reduced size blade for woodworking and to fit commonly available...
Veritas 1 1/2'' Pocket Layout Square
The Veritas Pocket Layout Square is machined from solid aluminium extrusion, anodized and laser etched on both sides, this triangular layout square is only 1½" on a side. The 1/2" wide by 1/8" thick base registers solidly against a workpiece and has a 1/8" offset on one edge and 1/4" on the other.
Like a standard layout square, it has 1/16" rule graduations as well as angle graduations in 10°...
Veritas Imperial Rule for Sliding Square
These Imperial rules for the Veritas sliding squares are interchangeable.
Veritas Metric Sliding Square
These cabinetmaker's squares are used to lay out or transfer measurements quickly and accurately; you always have an ample reference face against your work without having to flip the square. This also simplifies working in two axes at once (e.g., measuring in 50mm and over 40mm), substantially reducing the chance of error when measuring and marking two dimensions.
The stainless steel blade is...
Veritas Pocket Layout Square - Metric
Just as a speed square is an essential layout tool for carpenters and framers, these small squares are similar in both form and function but are appropriately sized for laying out joinery and other common workshop tasks.
Available individually and as a set including 35mm, 60mm and 85mm squares – each a compact, lightweight tool that fits into a pocket, comes to hand nicely, and is easy to...
Veritas Precision Square - Metric
This could easily become the most-used measuring tool in your shop. An ideal size for cabinet-making, it has the accuracy of an engineer's square (0.001" per inch of length). All four edges are ground, and both faces are graduated on the inside and outside edges. This version is graduated in half millimetres on the 8cm leg and in millimetres on the 15cm leg.
Each is useful not only for general...
Veritas Square Fence
A carpenter's square is frequently needed just because of its size. The key disadvantage of such a square (its lack of a supporting fence ledge) can now be eliminated using a Veritas square fence.
The 8" (200mm) long anodized aluminum extrusion can be readily attached to either the stock or blade of your square (depending upon intended use) with the two integral brass screws. The face of...
Woodpeckers DeadNutz Square 3.5''
Woodpeckers DeadNutz Square
Machined to perfection using the latest technology, giving rise to its name. To ensure the DeadNutz Square lives up to its name, Woodpeckers uses Wire Electrical Discharge Machining (EDM) technology. Wire EDM erodes away the metal at the micron level, resulting in incredible precision and quality.
DeadNutz is made from one piece of 3/8'' (9.8mm) thick stainless...
Woodpeckers in-DEXABLE Centre Finder
The Woodpeckers in-DEXABLE Centre Finder with 150mm metric blade and Rack-It.
The Centring Head holds the blade at a 45° angle relative to machined 90° surfaces. Marking the two diagonals of a square locates centre. It’s even easier to find the centre of a circle...just hold the Centring Head against the circle in any two different spots and strike a line across the diameter. The intersection...
Woodpeckers in-DEXABLE Combi Square
The Woodpeckers in-DEXABLE Combination Square with 300mm metric blade and Rack-It.
The combination square was invented in 1878 and has been copied countless times over the years, but it has rarely been improved upon. The Woodpeckers in-DEXABLE Combi Squares features the following......
Laser accurate scribing guides every millimetre.
Positive indexing every 30mm.
Laser engraved metric...