Sort By
Per Page
View
Grid
List
Pegas Regular Progressive Blades
These Pegas Scroll Saw blades are versatile, performing well in wood, plastic, bone, Corian® and most fibrous materials. These blades feature fine entry teeth to avoid splitting or tear-out and have coarser teeth in the centre to clear the waste. Perfect for coated materials or veneered surfaces, they give a very clean internal cut. Thickness of work ranges from 1.5mm to 60mm.
5" (130mm)...
Pegas Skip Tooth Blades
These Pegas scroll saw blades are a good all round versatile application blade. The range of sizes and teeth per inch allows the cutting of intricate patterns as well as rough-cut work. Thickness of work range from 1/16 inch to 2½ inch. Skip scroll saw blades perform well with wood, plastic, bone, Corian and most fibrous materials. The blades provide good chip removal, will accept a fast feed...
Pegas Super Skip Tooth Blades
These Pegas Scroll Saw blades offer an exceptionally clean cut for intricate fret work - the higher the tpi number, the finer the cut that can be made. Super skip tooth blades are versatile, performing well in wood, plastic, bone, Corian® and most fibrous materials but they are especially good for hardwoods. Thickness of work ranges from 1.5mm to 60mm.
5" (130mm) in length and supplied...
Pegas Coping Regular/Skip 6.5' Blades
For use in hand frames that require pinned end blades. These Pegas scroll saw blades are compatible for use in coping saws. Good for hard and soft wood up to 3/4" thick. Finish is medium to smooth depending on tpi selected.
6.5" (165mm) in length and supplied in packs of 6.
Descriptions below are:
Coping Skip 6.5" (Thickness in inches x Width in inches x TPI)
For example...
Pegas Double Tooth Blades
Pégas Double Tooth Scroll Saw Blades are a popular blade due to the excellent blend of the tooth/skip pattern. Double tooth blades contain sets of closely pitched teeth that aid in producing a fine finish and the skip adds the benefit of effective chip removal. Thickness of work range 1/16 inch to 2-1/2 inch. Double tooth blades perform well with wood, plastic, bone, Corian and most fibrous...
Pegas Double Tooth Reverse Blades
Pegas DoubleTooth Reverse Skip Scroll Saw Blades have the same basic tooth geometry as skip blades except that a limited number of reverse teeth have been added to the bottom of the blade. Reverse teeth prevent splinters from developing on the underside of the work piece because the top teeth do not cut entirely through the work. Thickness of work range 1/4" to 2". Blades perform well with...
Pegas Modified Geometry Blades
Modified Geometry Scroll Saw Blades tooth design, minimizes burning, tolerates aggressive feed rates, expels chips extremely fast, leaves a smooth finish and cuts patterns accurately. This (plain end) blade can be used on soft and hard wood up to 3" thick. It is also well suited for plastic. If you are currently using Olson PGT or Mach blades you will love our Modifed Geometry blades.
5" (130mm)...
Pegas Progressive Skip Tooth Blades
Enhance your scroll saw projects with Pegas Progressive Skip Tooth Blades, designed for superior performance across a wide range of materials. Whether you're working with wood, plastic, bone, Corian®, or other fibrous materials, these blades deliver clean, precise cuts every time.
Versatile Cutting: Perfect for wood, plastic, bone, Corian®, and most fibrous materials, ensuring versatility...
Pegas Reverse Skip Blades
Reverse Skip Scroll Saw Blades have the same basic tooth geometry as skip blades except that a limited number of reverse teeth have been added to the bottom of the blade. Reverse teeth prevent splinters from developing on the underside of the work piece because the top teeth do not cut entirely through the work. Thickness of work range 1/4" to 2". Blades perform well with wood, plastic, bone,...
Pegas Spiral Blades
Pegas Spiral Scroll Saw Blades (plain end) allow cutting around the entire periphery of the blade due to a helical shape. This design allows work to be fed in straight moves. The work does not have to be turned to make cuts, so sharp inside corners can be created. Excellent for wood, plastic, ferrous metals, nonferrous metals, bone, wax and more.
5" (130mm) in length and supplied in packs of...
Pegas Metal Cutting Blades
These are high quality scroll saw blades from Pegas for precise cutting of thin metals up to .125 inch (3 mm) thick and for other hard, non metallic materials. They are specifically heat treated to give maximum performance with power scroll saws. Can be used in hand frames also.
5" (130mm) in length and supplied in packs of 12.
Descriptions below are:
Metal Cutting number (Thickness in...
Pegas Regular Scroll 5' Blades
Pegas Regular Scroll Saw Blades (plain end) 5" are designed as a utility blade for a broad range of applications. These blades are compatible for use in C-arm and parallel power scroll saws. Good for hard and soft wood up to 3/4" thick. Finish is medium to smooth depending on tpi selected.
5" (130mm) in length and supplied in packs of 12.
Descriptions below are:
Regular Scroll...