Sort By
Per Page
View
Grid
List
Arbortech Mini Turbo Replacement Teeth and Screws
This pair of tungsten carbide teeth is for use on the Arbortech Mini Turbo Blade and the Turbo Shaft.
Includes Screws.
Arbortech Pad for Heavy Duty Abrasive Discs
This Arbortech Backing Pad fits the Contour Sander, Mini Turbo Kit and Mini Carver. The backing pad is made from rubber and has flexible edges to allow the pad to follow the curvature of your work.
They are used in conjunction with Arbortech 50mm Heavy Duty Abrasive Discs.
Arbortech Power Carving Unit Sanding Discs
Packs of 100mm diameter sanding discs for the Arbortech Power Carving Unit. The discs feature hook and loop backing for quick abrasive change, allowing you to reuse partially worn discs. Available in single grit packs of 8, or mixed pack of 12 (3 of each grit).
Arbortech Sanding Pad for Power Carving Unit
100mm sanding pad for the Arbortech Power Carving Unit is slightly flexible, making it good for sanding medium to large projects and capable of moulding to slight contours. It has a hook and loop facing for rapid abrasive changing. Use the Sanding Pad in combination with the Chip Catcher and attach to a vacuum for wood dust control or with the Levelling Guide to achieve flat, smooth surfaces.
Flexcut 14 Piece Power Gouge Set RG100
This 14 piece Power Gouge Set is a great value and contains a wide selection of tools for roughing out to detailing.
Power Gouges included: RG305 #3 x 3/8", RG400 #3 x 5/8", RG300 #3 x 3/4", RG200 #3 x 1", RG306 #5 x 5/16", RG401 #5 x 9/16", RG301 #5 x 5/8", RG201 #5 x 7/8", RG402 #8 x 3/8", RG302 #8 x 1/2", RG309 #11 x 1/8", RG307 70 deg. x 1/4", RG403 70 deg. x 3/8", RG203 90 deg. x 11/16".
Flexcut Bosch Adaptor SK105
This adaptor is for the BOSCH (SKIL) power carver and accepts all the flexcut SK range of carving tools.
Flexcut Detailing Power Gouge Set RG310
These Flexcut Detailing Power Gouges are tools for smaller carving and detail.
Can be used by hand with the RG102 Handle Adaptor.
Power Gouges included:
RG305 #3 x 3/8''
RG306 #5 x 5/16''
RG309 #11 x 1/8''
RG307 70 deg. x 1/4''
Flexcut Power Gouge Interchangeable Handle RG102
Allows any RG range reciprocating gouge to be used as a hand tool.
Flexcut Roughing Power Gouge Set RG404
These Roughing Power Gouges are for removing larger amounts of waste wood. Can be used by hand with our RG102 Handle Adaptor.
Power Gouges included: RG400 #3 x 5/8", RG401 #5 x 9/16", RG402 #8 x 3/8", RG403 70 deg. x 3/8".
Flexcut Universal Adaptor SK109
This Flexcut Universal Adaptor fits many reciprocating power tools e.g. Proxxon Detail Carver and Automach.
Accepts all Flexcut SK tools.
Orbicut
Orbicut is from the manufacturers of Kirjes in Sweden...........
Designed to be safe and efficient (yes it was designed by Swedes!) it has two HSS cutters inserted into a ball which project about 0.1mm. This small amount of projection makes the tool easy to control whilst producing thin shavings instead of dust.
* Works fast and efficient at a low speed (5000Max RPM).
* Stays sharp for a long...
Orbicut Grinding Card
A double sided diamond credit card style stone, designed to be used with the Orbicut blades / cutters.
Orbicut Spare Cutters
The Orbicut comes with fine HSS cutters as standard. Kirjes have now added a coarse option which has a heavier cut than the standard.
Come as a pair with screws.
Saburrtooth 1/4' Cylinder - 1' x 1'
Head Diameter: 1"
Head Length: 1"
Saburrtooth 1/4' Cylinder - 3/8'' x 3/4''
Head Diameter: 3/8"
Head Length: 3/4"
Saburrtooth 1/8'' Burrs Set - Extra Coarse
This set of burrs from Saburrtooth includes:
18BN14
18C14
18F38
18S38
18BUD14
Saburrtooth 1/8'' Dove Tail Smooth End - 3/8'' x 1/2''
Head Diameter: 3/8"
Head Length: 1/2"
Saburrtooth Adapter 1/4'' Shank
Cup Adapter 1/4" Shank (required for use with all 2” wheels)
Thread: 3/8" x 24 TPI
Shank: 1/4"
Fits: 1 3/4" Cups, 2" Cups & 2" Wheels
Weight: 2oz
Please Note:
Not for use on METAL or CERAMICS.
Safety: Always use approved eye protection and safety devices!
Recommended Operating Speed: 4,000 to 25,000 RPM
"
Saburrtooth 1/4' Ball Nose - 1/2' x 3/4'
Head Diameter: 1/2"
Head Length: 3/4"
Saburrtooth 1/4'' Ball Nose - 1/4'' x 1 3/4''
Head Diameter: 1/4"
Head Length: 1¾"
Saburrtooth 1/4'' Ball Nose 3/4'' x 1 1/4''
Head Diameter: 3/4"
Head Length: 1¼"
Saburrtooth 1/4' Burrs Set - Coarse
This set of burrs from Saburrtooth includes:
14BN14 - Ballnose, head diameter 1/4" and head length 1 3/4"
14F12 - Flame, head diameter 1/2" and head length 3/4"
14S58 - Sphere, 5/8" diameter
14C12 - Cylinder, head diameter 1/2" and head length 3/4"
14T14 - Taper, head diameter 1/4" and head length 1 3/8"
14RS34 - Rotosaw, head diameter 3/4"...
Saburrtooth 1/4' Burrs Set - Fine
This set of burrs from Saburrtooth includes:
14BN14 - Ballnose, head diameter 1/4" and head length 1 3/4"
14F12 - Flame, head diameter 1/2" and head length 3/4"
14S58 - Sphere, 5/8" diameter
14C12 - Cylinder, head diameter 1/2" and head length 3/4"
14T14 - Taper, head diameter 1/4" and head length 1 3/8"
14RS34 - Rotosaw, head diameter 3/4"...
Saburrtooth 1/4' Concave - 1/2' x 3/4'
Head Diameter: 1/2"
Head Length: 3/4"
Saburrtooth 1/4' Concave - 1/2' x 3/4' (Smooth End)
Head Diameter: 1/2"
Head Length: 3/4"
Saburrtooth 1/4' Cross Cutter - 1/2'
Shape: Cross Cut Eyecutter
Diameter: 1/2''
Head Length: 1/2
Saburrtooth 1/4' Cross Cutter - 3/4'
Shape: Cross Cut Eyecutter
Diameter: 3/4''
Head Length: 3/4
Saburrtooth 1/4' Cylinder - 1' x 1' - (Radius End)
Head Diameter: 1"
Head Length: 1"
Saburrtooth 1/4' Cylinder - 1' x 1' - (Smooth End)
Head Diameter: 1"
Head Length: 1"
Saburrtooth 1/4' Cylinder - 1/2' x 3/4'
Head Diameter: 1/2"
Head Length: 3/4"
Saburrtooth 1/4' Cylinder - 1/2' x 3/4' - (Smooth End)
Head Diameter: 1/2"
Head Length: 3/4"
Saburrtooth 1/4'' Cylinder - 1/4'' x 1 3/4''
Head Diameter: 1/4"
Head Length: 1¾"
Saburrtooth 1/4'' Cylinder - 1/4'' x 1 3/4'' - (Smooth End)
Head Diameter: 1/4"
Head Length: 1¾"
Saburrtooth 1/4'' Cylinder 3/4'' x 1 1/4''
Head Diameter: 3/4"
Head Length: 1¼"
Saburrtooth 1/4'' Cylinder 3/4'' x 1 1/4'' (Smooth End)
Head Diameter: 3/4"
Head Length: 1¼"
Saburrtooth 1/4'' Dove Tail 3/4'' x 1 1/4''
Head Diameter: 3/4"
Head Length: 1¼"
Saburrtooth 1/4'' Dove Tail 3/4'' x 1 1/4'' (Smooth End)
Head Diameter: 3/4"
Head Length: 1¼"
Saburrtooth 1/4' Flame - 1/2' x 3/4'
Head Diameter: 1/2"
Head Length: 3/4"
Saburrtooth 1/4'' Flame 3/4'' x 1 1/4''
Head Diameter: 3/4"
Head Length: 1¼"
Saburrtooth 1/4' Flame - 3/8' x 3/4'
Head Diameter: 3/8"
Head Length: 3/4"
Saburrtooth 1/4' Rotosaw - 1' x 1/4'
Head Diameter: 1"
Head Length: 1/4"
Saburrtooth 1/4'' Rotosaw - 1 1/4'' x 1/4''
Head Diameter: 1¼"
Head Length: 1/4"
Saburrtooth 1/4' Rotosaw - 3/4' x 1/4'
Head Diameter: 3/4"
Head Length: 1/4"
Saburrtooth 1/4' Sphere 1' x 1'
Head Diameter: 1"
Head Length: 1"
Saburrtooth 1/4' Sphere - 1/2' x 1/2'
Head Diameter: 1/2"
Head Length: 1/2"
Saburrtooth 1/4' Sphere - 5/8' x 5/8'
Head Diameter: 5/8"
Head Length: 5/8"
Saburrtooth 1/4' Taper - 1/2' x 1'
Head Diameter: 1/2"
Head Length: 1"
Saburrtooth 1/4' Taper - 1/2' x 1' - (Smooth End)
Head Diameter: 1/2"
Head Length: 1"